Main > Main Forum

I just bought a MKII for $400 did I get a good deal

Pages: << < (3/4) > >>

F1are:

i payed $450 for SFII 'CE, which is twice as much as they were sold for more than 10 years ago.

SirPeale:

Remove the JAMMA connector and clean the PCB edge connector with either a pink eraser or a fiberglass pen.  Also push down on all socketed chips.  Then check the voltage @ the JAMMA harness (without the board plugged in, of course).  Hopefully it should be ~5.18VDC.  If it's higher or lower, adjust as necessary.  Then plug it back in and remeasure at the board.

srabelpawz:

  i might be selling MK2, Ultimate MK3 and MK4 (all boards working 100%) as a package deal if the price is right.

testicle187:

Will a jamma connector from MK2 hook right into an MK3 or 4 and be up and running?  Well, except for the lack of a run button.  I might be interested in your setup if the price isnt too high.

srabelpawz:

  you would need to add the run button as MK2 did not have that one. make me an offer on the boards if interested.

Pages: << < (3/4) > >>

Go to full version