Main > Main Forum
Euro-Stik Mounting?
(1/2) > >>
Fusion Disaster:
I searched, but didn't find anything on this.

What is the best method of mounting a Suzo Euro-Stik? I have 4 of them I'm putting into a new control panel and want to have them flushmount, so I'm guessing I'll need some sort of mounting plate. Will a trackball plate work? Any other suggestions?
Fusion Disaster:
Anyone using these? Someone's got to know about them.
ArcadEd:
You have a picture?  Maybe we can help.
Fusion Disaster:
Here are a couple sketchs I made of the joystick:
- Side View
- Top View

These appear to be almost the same thing as the Omni-Stik and I'm thinking they should be mounted the same. With some sort of mounting plate as they need to be flush mounted like a trackball. I'm thinking that maybe a mounting plate for a 2 /14" trackball might work to make the top of the CP flush with the joystick, and I could then just attach the joystick to the under side of the CP using some brackets and bolts.

Any other ideas?

Can someone who has these installed show me some pics of theirs?
Knievel:
They are exactly the same as Omni-Stiks.

Are you mounting them into a wood CP? Normally you just route out the top and drop them in. You'll have to cover your CP with plexi afterwards or use filler to make the top smooth.

Groovygamegear.com sells a metal mounting plate for them if that's what you really want. You may have to e-mail them directly to purchase it.
Navigation
Message Index
Next page

Go to full version