Main > Main Forum

Connectivity ? with GP-Wiz49, druin, and rotary adaptor kit

Pages: (1/2) > >>

Nailz:

So I bought all of this stuff months and months ago and stepped away and have now forgotten how the hell all of this goes together....

markrvp:

CW1 and CCW1 are:  Clockwise 1 and Counter Clockwise 1.  These are the inputs that make the player 1 sprite turn left and right.  You hook these up to any two inputs on the GP-Wiz 49 and then map them in MAME.

Go  back and look in the GP-Wiz 49 thread (I think about page 7) for the diagram on how the joystick is connected to the GP-Wiz 49.  There is a specific pinout.  I don't think it's just 1-8 on the joystick goes to 1-8 on the GP-Wiz.

I'm not at my CP at the moment so I can't look at it, but I hope this at least gets you on the right track.

Nailz:

Thanks Mark, I did figure out what they meant, and I looked through the MAME config but did not find any mapping for them at all.  I am using version .81 for my setup, did the CW, CCW setting not come in until a later version?

The diagram you reference did come with the purchase of my GP-Wiz49, and it does show all the key numbers, it doesn't really reference which ones would go to the default CW, CCw, etc. 

Like I say, I think I am just missing something basic and the light isn't turning on in my head.

Thanks,

Marty

Tiger-Heli:


--- Quote from: Nailz on November 12, 2005, 12:28:20 pm ---Thanks Mark, I did figure out what they meant, and I looked through the MAME config but did not find any mapping for them at all.
--- End quote ---


Nailz:

Thanks Tiger-Heli,  I went through the config with both Analog Plus (.90u1) and the latest MAME (.101) and they are they same for the Dial Settings...

They show:
Dial Analog   Mouse 1 X
Dial Dec        Left Arrow
Dial Inc         Right Arrow
Dial V Analog   Mouse 1 Y
Dial V Dec        Left Arrow
Dial V Inc         Right Arrow

In what you listed, would it make sense they match up with Dial Analog and Dial V Analog?

Anyone with this hardware, I'd love to hear how you have it set up.

Thanks again,

Marty

Pages: (1/2) > >>

Go to full version