| Main > Main Forum |
| Modding a Vectrex |
| (1/8) > >> |
| RayB:
I have this idea, discussed in a highjacked BST thread, to build a small cab using a Vectrex, and "enhancing the experience" using techniques such as an "underlay" via reflection techniques. Basically what that is is reflecting the image of the Vectrex on a semi-reflective mirror, while in the background there is a blacklit image. (The inspiration comes from Asteroids Deluxe. You really have to see it in person to appreciate the effect). Problem 1: is that I would need a way to easily flip the screen image along the X axis. I am guessing this can be done easily with a small hardware hack. Possibly similar to "yoke flipping"? Problem 2: Since each game is different, it would require different artwork. For overlays, that can be easily solved by having a small slot where the original Vectrex overlays can be slid in. For the backgrounds it could be a similar set up, or maybe even something on a roll that can be scrolled into place with a hand-crank or motorized solution. This project will probably never leave the drawing board, but let's hear some ideas!! |
| Zero_Hour:
It's an interesting idea, but If I had a Vectex system, I'd have a hard time hiding it inside a cabinet. I'd be more likely to build a nice display case for it. |
| RayB:
--- Quote from: Zero_Hour on November 08, 2005, 05:04:33 pm ---It's an interesting idea, but If I had a Vectex system, I'd have a hard time hiding it inside a cabinet. I'd be more likely to build a nice display case for it. --- End quote --- But what if you had... TWO? :) |
| XtraSmiley:
Great idea. VT are cheap on ebay and using a ZVG card you can play actual arcade games on it. Do it man, then I can buy one off of you! |
| arcadefever:
i just got a vectrex and i think this is a good idea !!! + i found this guy, i got a cart with 5 games one of them is a clone of asteroids !!!! http://www.classicgamecreations.com/ |
| Navigation |
| Message Index |
| Next page |