| Main > Main Forum |
| DB25 Crimp Style Connectors |
| (1/2) > >> |
| starnix17:
I've been working with some DB25 connectors on my project and there a pain. My solder isn't strong enough and it's hard working in such small places. So.... I was in my Radio Shack and I saw these... http://www.radioshack.com/product/index.jsp?productId=2102865&cp=&kw=d-sub+crimp&parentPage=search Would I be able to get away with those? |
| markrvp:
You still have to solder the wires into the pins. |
| starnix17:
Then I attatch the pins to the connector? |
| markrvp:
No, you actually have to solder the wires down into the pin receptacles. The "female crimp" refers to the plug's gender and not an ability to crimp wires into it. |
| Ed_McCarron:
Since RS's website seems to be down... Heres a link from Jameco's catalog. http://www.jameco.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10001&catalogId=10001&langId=-1&categoryId=302510 These are d-sub connectors, with crimp pins. You crimp the wire into the pin, then insert the pin into the d-sub shell. Easy to mangle the pins while crimping, and probably needs a special tool. I use some mil-spec crimp tool that work has lying around. |
| Navigation |
| Message Index |
| Next page |