| Main > Main Forum |
| whats the best specs for mortal kombat |
| << < (3/4) > >> |
| seibu:
Hiya. I have a P3 800 with 256Mb and I actually get 60/53 on Mortal Kombat with AdvanceMAME 0.90. That's running too fast, yes, in order to avoid having to adjust the sync controls on my monitor. And yes, the top and bottom of the screen are slightly clipped! But the point is, that PC should be just about up to the job if set up right. |
| battletoads:
Well. I have a MAME pc with an AMD Duron 800mhz, 640mb ram, 64mb video card, and MK1 and MK2 only run at ~30fps in Mame32 0.95. Auto frameskip is off, vsync is off. I should mention too that the sound stutters, like instead hearing "Sub-Zero", you hear "Sub-sub-zero". Any ideas? Most any other game that I would like to play run perfectly, except the other MK games and the NBA JAM games. |
| Anubis_au:
--- Quote from: grayxx on October 24, 2005, 02:41:14 pm ---would a pentium 3 800mhz,pc with 128 meg ram and a 128 mb graphics card be ok for mortal kombat?? --- End quote --- My first cab (now sold off) had those exact specs: P3 800MHz, 128mb RAM. It had only a 4mb video card, not 128mb. And I can confirm, it played Mortal Kombat just fine. I ran v0.77 of advmame (dos version) with advmenu as the front end. |
| battletoads:
I just tried v0.77 of AdvanceMAME, with the version of AdvanceMENU that was released the same day, and I still get the same results. If everybody with similar rigs had success, there must be something wrong here. Is there a past version of Mame32 that will play MK2 without a hitch? It runs flawless on my P4 3ghz home pc, so my first guess would be that the processor is the problem. I mean even the character select screen runs at 33 fps on my mame pc. I can turn directdraw and / or direct3d on and off and the fps doesnt change. Disabling sound only adds 1-2 fps. Throttle, enforce aspect ratio, none of these seem to change the fps at all. Unclicking stretch using hardware actually decreases the fps to 27 fps. Other games like X-men run at 87/60fps. |
| Namco:
Since this is the Mortal Kombat technical support thread, I'll ask my question here ;D: The resolution of Mortal Kombat is something weird like 399x253 x 53hz right? Can I program an Nvidia card to run those settings? 399 seems like quite a strange number to be running at. Any tips on getting a sharp, clean, un-blurry/stretched image out of MK on Mala/mame .82 running on a Nvidia GF4 TI-4200? I know how to add custom resoltions to my card like Street Fighters odd one of 384x224, but I haven't done MKs because I don't know if the card can do it. |
| Navigation |
| Message Index |
| Next page |
| Previous page |