| Main > Main Forum |
| quick question about comp molex |
| (1/2) > >> |
| Abomination:
Is there any way to tell which have +5v and which are carrying +12v without using a multimeter (ie visual or what its attached to?) Also, I have an ipaq4 and I'm using 360 opticals, I just hook up the +5v wire to the computers power supply and the ground to the common ground spot on the ipaq? |
| Timoe:
You might already know this but you can get your +5 right off of your IPAC4. |
| quarterback:
The standard is RED -> 5v YELLOW -> 12v But I always check first, because you never REALLY know without testing. |
| Abomination:
Thanks, also am I correct on the optical 360's ground, connect it to my common ground wiring harness thats connected to the ground of the ipaq or do I connect it to the ground of the molex?! |
| markrvp:
Either ground should work, but I would (and did) connect both 5v and ground to the Ipac. |
| Navigation |
| Message Index |
| Next page |