Main > Main Forum
Happ 3" high lip trackball
markrvp:
I would recommend going to Radio Shack tomorrow and getting the 6 pin Molex connector that will plug into your trackball for $2. Wire that connector to the Minipac so that you can easily connect/disconnect the trackball without cutting off the original connector.
dema:
After removing the trackball from my panel and taking a closer look, it seems that the wiring harness from Ultimarc takes the place of the wiring that comes with the Happs Trackball. From the look of it you just unplug the wiring to the x and y axis and replace it with the molex connectors on the wiring harness.
And to get the spinner molex to attach I had to shave off the two nubs with an exacto knife and now it's a perfect fit.