Main > Main Forum

Hooking up a coin mechanism

Pages: << < (2/10) > >>

mag48:

i do have some pictures but the link that says insert picture will not let me put them in... can you give me any help??? thx

mag48:

i think here are some pictures lets see if they come up!

mag48:

yep they did... so does anyone got any help for me................

CheffoJeffo:

I was actually hoping for closeup pictures of the coin mechs and wires.

Basically, you just have to connect the common ground wire to the ground prong on the microswitches, then the coin1 wire and coin2 wire to the appropriate NO prongs (e.g. P1 wire to P1 switch). I wanted pictures so that I could make a reasonable guess as to which wire is which.

There may also be wires for a coin counter to be connected.

I am guessing that this isn't much help to you, but hard to do much more when working blind.

You might also want to change the Subject of this thread to mention wiring coin mechanisms ... you might get more eyes on your question.

Cheers.

Cheers.

mag48:

Here are the best pics i can get... sry :-[

Pages: << < (2/10) > >>

Go to full version