| Main > Main Forum |
| Once and for all - HOW TO RETAIN GLASS? |
| (1/3) > >> |
| darthbane2k:
Guys, I seriously need some advice as what to use to retain the glass that goes over the monitor in my cab. A bezel behind the glass will hide everything but the screen. Please put your methods here with pictures preferably! I saw some glass clips in my local hardware store but was wondering whether these would look intrusive as in all of the pics I have seen of other people's wonderfully custom-built cabs, I have never seen any visable clips in the screen area. |
| Minwah:
There are some pics of mine here: http://forum.arcadecontrols.com/index.php/topic,18812.0.html ...but my cab is unusually shaped, so the hinged-top-glass-retainer idea won't work for all cabs. |
| darthbane2k:
Am i seeing this incorrectly or is the glass in your cab kept in place by gravity and the routed-grooves. Is this secure? |
| RetroACTIVE:
No clips... just gravity for me... basically sits on the bezel and rests on the cross-member. works fine. (sorry about the crappy diagram). |
| M3talhead:
You could do what Midway did in their cabs and just rest it in a groove near the CP, while holding it in place at the top with a piece of painted angle-aluminum. |
| Navigation |
| Message Index |
| Next page |