Main > Main Forum

ummm need a bit help with coin door cut out measure...

Pages: (1/2) > >>

bossyman15:

http://www.happcontrols.com/coindoors/40000800_exploded.htm

see the cut out measure is 10.16" x 12.68" but what is .16 and .68???

can anyone help me out please?

Ldsfunaz:

you dont have a ruler that is accurate down to .01 inches?

man, you need to update your tools!!!

bossyman15:

no i don't.

so could you change it into factor (sp?) like 1/4? 1/8? 3/4 etc



NoOne=NBA=:

Multiply the decimal part by whatever unit you want to use.

.16 x 16 = 2.56 (That would be between 2/16 and 3/16).
.68 x 16 = 10.88 (That would be between 10/16 and 11/16).

.16 x 32 = 5.12 (5/32)
.68 x 32 = 21.76 (22/32, which is 11/16)

stratjakt:

16/100 = x/32

lets cross mutiply, its fun!

100x = 512
x = 512/100
x = 5.12

So, .16 = 5.12/32s (5/32-ish)

Now if a train was leaving Cleveland at 30 miles per hour and Johnny has three apples..


Wait till you get the door and trace it because it would sure suck to find out the measurements on the site were a typo and you cut too big..


Pages: (1/2) > >>

Go to full version