| Main > Main Forum |
| What type of Glass? |
| (1/2) > >> |
| chris2922:
Im about to build an cocktail mame cab with a 17" PC monitor. (Its not for me, and its on a budget). I intend to use a large piece of glass to cover the top - give it a kind of coffee table look. Underneath that will be a piece of mdf with a square cut out revealing the monitor. Has anyone built something similar? I intend to use smoked, strengthened glass but im interested in hearing other peoples advice. |
| Ken Layton:
Tempered glass is extremely sensitive to any taps on the edge. The glass will shatter and go everywhere. |
| javeryh:
I am waiting for the local glass shop to finish my tabletop right now. I am using a standard Ms. Pac-man shaped top and there is going to be a piece of 1/8" grey smoked glass covering the monitor (sitting in the groove around the monitor cutout on top of the bezel and flush with the table top) and a piece of 1/8" tempered clear glass covering the entire top held in place with glass clips. Everything total was $150 ($100 for the tempering process!). It's a bit much but at this point it doesn't even matter anymore. As soon as it comes in I am going to assemble it and I will post some pictures on my stupid blog www.knightsofthearcadetable.blogspot.com. |
| jedi27:
Definately go for the tempered stuff.. about 10 times stronger than "normal" glass... I almost went the smoked route - wished I would have... yes - beware of the bronze vs the grey smoked stuff.. I haven't heard anything about the tendency to chip... |
| Bones:
Mine was described as "laminated glass" which is 2 pieces 3mm glass fused together with a grey tinted film between the two pieces. It was explained to me that if it does break you won't get shards of glass fly everywhere, it resembles a car windscreen break where the glass is safely retained in place. |
| Navigation |
| Message Index |
| Next page |