| Main > Main Forum |
| miini-PAC and Millipede trackball |
| << < (3/3) |
| MinerAl:
Looks like the same pinout to me. Try what is in that other thread. I don't have a mini-pac, so I don't know if there is a Hi/Lo jumper, but the u/d and l/r should be the same. |
| Searcher7:
--- Quote from: MinerAl on December 04, 2005, 10:02:03 pm ---Looks like the same pinout to me. --- End quote --- |
| MinerAl:
--- Quote from: Searcher7 on December 04, 2005, 10:10:18 pm ---I wish I knew how to crop those images in MsPaint *before* I post them. --- End quote --- Open the image in paint. Select and Copy just the part you want to see. Go to the Image menu and choose Attributes. Set the image to a resolution of 1 x 1. Paste the selection back in, and the image will stretch to accomodate it. |
| AndyWarne:
I had another customer who was able to send some pictures with the board uncovered. I am pretty sure these are the connections: pins 4 and 8 are X1 and X2 Pin 10 ground Pin 9 is 5 volts Andy W |
| Navigation |
| Message Index |
| Previous page |