In the book on page 49 (2nd paragraph), Saint talks about mounting the front of the monitor shelf flush with the front of the cabinet and that will allow the glass that will be covering the monitor to rest on the monitor shelf about 3/4" from the front of the cabinet.
Refer to picture 2-22, though, and the front of the monitor shelf doesn't look flush with the front of the cabinet at all.
I guess I'm confused as what to do - the paragraph doesn't really make sense to me when looking at the picture. Any insight on this one?
Also - it appears that the monitor shelf height and the monitor bezel changed at some point during the construction. Referring to the pictures in Chapter 18 of the companion CD:
S_DSCN6191.JPG - the monitor shelf looks as if it was mounted per the instructions in the book
S_DSCN6539.JPG - shows the monitor mounted with the Happ Bezel per the instructions in the book, but there appears to be about a 1.5" gap between the top of the control panel and the bottom of the monitor bezel
S_DSCN6534.JPG - shows the monitor shelf lowered to its new location and where the original (book) location was
S_DSCN7098.JPG - shows the completed cabinet with *what appears* to even be a different bezel. Is that the case or is it just the Happ Bezel lowered?
Could you please provide some insight into the above? Also - what was used to fill the gap up top once the monitor was lowered?
Thanks a lot!!
S_DSCN