| Main > Main Forum |
| Cab size question |
| << < (2/2) |
| SteveJ34:
--- Quote from: Cyclops on September 02, 2005, 06:45:42 am ---Just wondering if anyone else has built a similar sized cab? Surely I am not the only one who wants a small "footprint"? Additionaly, can anyone point me to a GOOD, CLEAR description of how the CP attatched to their cab? Having a hard time working out exactly how I am going to do it. Oh and to answer the prev question - monitor will prolly be flat, maybe a small angle as I want to use a lightgun eventually --- End quote --- There are many examples, many with detailed pics in the examples section. Most designs have a ledge that a control box sits on. Some attach the control panel using panel clamps. I just used a couple of 2x2 boards attached horizontally across the area where the CP will sit. My CP has a hinged top. I then used 4 bolts that run from inside the CP box through holes in the 2x2 boards and finished with 4 wing nuts and washers. |
| Navigation |
| Message Index |
| Previous page |