| Main > Main Forum |
| WICO perfect 360 adaptor question |
| (1/2) > >> |
| nostrebor:
I picked up a couple of the "snap in" perfect 360 WICO adaptors the other day for an upcoming project. They came minus the "actuator" part that goes on the base of the stick. Can anybody with a set of these let me know what that actuator is made of? Is it the same as leaf switch WICO actuators? Plastic? Even some pics would be nice if you've got em. Thanks. |
| nostrebor:
Here is a pic from searching. Two different actuators? |
| Kremmit:
They're made from black plastic, and yes, there's two of 'em. The big one is for 8-way, and the small one is for 4-way. I know I measured the actuators for somebody else once (Quarterback?), but darned if I can find the measurements now, and my adapters are buried somewhere. Maybe the info is still in the other member's PM box? |
| spiffyshoes:
You got it backwards. The big actuator is for 4-way mode and the small one is for 8-way mode. They are the same size as the leafswitch actuators except they are made of black plastic. The lasers on the P360 adapters work better with black plastic. |
| nostrebor:
--- Quote from: spiffyshoes on August 29, 2005, 04:37:11 pm ---You got it backwards. The big actuator is for 4-way mode and the small one is for 8-way mode. They are the same size as the leafswitch actuators except they are made of black plastic. The lasers on the P360 adapters work better with black plastic. --- End quote --- So the actuator sizes are the same, but swapped big for little from WICO leafswitch sticks? They look bigger in the pic I posted. Sounds like I can paint a 4-way leafswitch actuator black, and have a solution for 8-way mode (what I'm trying to achieve). LMN if I'm wrong/backwards please. Thanks for the input guys! |
| Navigation |
| Message Index |
| Next page |