| Main > Main Forum |
| Another Guncon 2 question |
| (1/4) > >> |
| divemaster127:
I have been looking at the Guncon 2 for a while & have this question... 1. will the guncon 2 work on a betson 27" arcade monitor without the special circuit 2. can you use 2 of the guncons at a time 3. what is the best place to pick up a set of these & the best model thanks for your time divemaster127 |
| Acorn:
1. The monitor is not the deciding factor there - its the output from your computer. The gun takes as input Composite RCA. If you can feed it that, it will work on your arcade monitor. 2. Yes, you can use 2 guncon2's at a time. Since Windows XP does not support two mice, only one can track at a time. 3. See the Gun Reviews forum at http://guncon.acornscity.com/forum.php . It will have more reviews shortly, but this will give you some ideas of where to start. |
| divemaster127:
im using the arcade vga based on the ati 9200 would this work without using the circuit thanks divemaster127 |
| wintermute:
since there are so many gun questions on the forum these days, I want to ask one. |
| Toonces:
--- Quote from: divemaster127 on August 24, 2005, 01:22:30 pm ---im using the arcade vga based on the ati 9200 would this work without using the circuit thanks divemaster127 --- End quote --- Yes, it works with the guncon2mouse driver only though. All you have to do is tap the composite sync and video ground. I did that right on my JAMMA harness by using a cheap radio shack 3 foot RCA extension cord and cutting one end off and using 3M wire taps directly on pins P (Composite Sync) and 14 (Video Ground). |
| Navigation |
| Message Index |
| Next page |