| Main > Main Forum |
| Is it normal to have to run IPAC programming utility after restart? |
| << < (3/6) > >> |
| Timoe:
I went to the ultimarc website and I cant tell from the photos any difference between the two normal and VE. Can you tell from the pictures I posted? And in notepad, when I use the RIGHT joystick (player 2) it shows up as G, R, etc when it is working. The only non-standard keys I have are on my admin panel. Tab Esc etc. What bothers me is that the whole thing is not recognized after restart. |
| 2600:
What's the header used for behind the PS2 connectors? Do you have one PS2 connector on your board or two, I can't tell from the pic. Maybe it's just an initialization problem, so let's first deal with that. Using a USB hub or plugged directly into the PC? If with a HUB, try it without. You say on a restart it is not detected, what about if you unplug the USB connector then plug it back in? Does it work then? If you have a PS2 cable try it with that on a restart and see if that works. |
| Tiger-Heli:
I-PAC/2 has a main and a pass-thru connector on the edge of the board. I-PAC VE has a single USB A connector in the center edge of the board and no pass-thru. Looks to me like you have an I-PAC/2. I think the header is for LED connections. |
| Lilwolf:
This sounds like a job for Andy. Email him directly. Hes GREAT on tech support. Heck, he helped me fix a opti-pac that I miswired and blew up... (note: don't swap the +5 and ground when wiring an opti-pac... ) |
| 2600:
I wanted his response Tiger-Heli. ;) I forgot about the LEDs, I should get back to work, I don't know why I insist or trying to help when you've already got him taken care of. |
| Navigation |
| Message Index |
| Next page |
| Previous page |