Main > Main Forum
Coin Co Reject Button Help...
Pages: (1/1)
hitandrun:
I am trying to find the easiest way to get the 25c insert for my coin reject button to be lined up with the other.
darktemp:
It's not difficult to remove the assembly. Just remove the 4 nuts on the inside corners and the whole thing comes off. From there It's pretty simple to figure out.
Ken Layton:
Actually just take the coin chute out of it's holder, take those two nylock nuts off (1/4" nutdriver), and slide the coin trough backwards. Watch out for the reject button spring so it doesn't fly out. The button just slides out now.
hitandrun:
Thanks for the help! I will give this a try this evening when I get home.
Pages: (1/1)