| Main > Main Forum |
| Proper A-Pac Setup Help |
| (1/1) |
| toolaa:
I am setting up the A-Pac with three axis controls. When I go to calibrate the controls, P1x and P1x do show movement in the calibration screen. However P2x does not. I would like to confirm the wiring of the pot. Do I need a second .15uF cap on the other side of the board? (See Pic Below) |
| grueinthebox:
Yes, you need the 2nd cap. |
| toolaa:
Thanks... |
| Navigation |
| Message Index |