Main > Main Forum

I-Pac / Mini-Pac Question

Pages: (1/3) > >>

MameJunkie:

I have everything hooked up and all the switches seems to work.

BUT whatever switch I program to be the ESC, it will not function.
In the configuration program, hitting the ESC from the keyboard shows up but the button I programmed will not.  If I reprogram that button to something else, it will work; that at least tells me its not a hardware problem.

Another question on the 'shift' key, my understanding is that when the 'shift' key is pressed + another key, the 'shift' function for that switch/button (ie another keycode) will be generated. 
True?  If so, that also doesnt seem to work. ???

Thanks for any clue on what I have missed.



Tiger-Heli:

Odd, programming seems to be working, since you can re-program away from it and get it working.

Are you using the correct sofware, which for the minipac would be here?:  http://www.ultimarc.com/winipac.html

RayB:

Are the jumpers set to MAME?

MameJunkie:

The jumper is default (MAME).

The ESC part still doesn't work.  I'm going to try and  the ALT setting and reprogram all the swithes I need manually.

MameJunkie:

Still doesn't work.

Is what I'm doing to reset the switch keycode correct?

If I wanted P2-SW8 to be ESC when pressed,
click on the 'P2-SW8' in the configuration program and
then press 'ESC' when asked what key to assign to it.

Correct?




Pages: (1/3) > >>

Go to full version