| Main > Main Forum |
| I-Pac / Mini-Pac Question |
| (1/3) > >> |
| MameJunkie:
I have everything hooked up and all the switches seems to work. BUT whatever switch I program to be the ESC, it will not function. In the configuration program, hitting the ESC from the keyboard shows up but the button I programmed will not. If I reprogram that button to something else, it will work; that at least tells me its not a hardware problem. Another question on the 'shift' key, my understanding is that when the 'shift' key is pressed + another key, the 'shift' function for that switch/button (ie another keycode) will be generated. True? If so, that also doesnt seem to work. ??? Thanks for any clue on what I have missed. |
| Tiger-Heli:
Odd, programming seems to be working, since you can re-program away from it and get it working. Are you using the correct sofware, which for the minipac would be here?: http://www.ultimarc.com/winipac.html |
| RayB:
Are the jumpers set to MAME? |
| MameJunkie:
The jumper is default (MAME). The ESC part still doesn't work. I'm going to try and the ALT setting and reprogram all the swithes I need manually. |
| MameJunkie:
Still doesn't work. Is what I'm doing to reset the switch keycode correct? If I wanted P2-SW8 to be ESC when pressed, click on the 'P2-SW8' in the configuration program and then press 'ESC' when asked what key to assign to it. Correct? |
| Navigation |
| Message Index |
| Next page |