| Main > Main Forum |
| Removing an old cp overlay |
| (1/1) |
| traknfieldSUPAstar:
What's the best way to remove an overlay on a metal cp? I started to peel the one I have right now, but it's brittle and it comes off in strips, plus there's still a "sticky" residue left over. Any suggestions? on a side note: Is a heat gun the best way to remove side art (the sticker kind, not the painted ones)? |
| Q*Bert_OP:
Soak the entire metal panel in paint stripper for at least 5 hours, then use a metal scraper to get the overlay off. |
| RayB:
Keep peeling/ripping it away. Get one of those razor scrapers. That helps. Then when it's all off, use Goo Gone and the razor scraper to remove the sticky stuff. |
| Stingray:
Heat gun to remove the CPO, followed by laquer thinner on a rag to remove the goo. -S |
| DreamArcades:
I've prefer goo be gone as well, but any orange cleaner will work in a pinch. |
| Navigation |
| Message Index |