Main > Main Forum
X-Men Arcade
<< < (2/2)
battletoads:
You're both right, and that makes sense.  I tried running the "coin" wires from the konami jamma+ cables to extra buttons on the CP I built and sure enough it thought I added a coin when I pressed a button.   The X-men board I have IS the one you described where each player needs their own coin mech.  Said PCB has no free play option. 

Only thing im not 100% clear on is which wire from the coin mech should I run to the main Jamma cable (player 1 and 2) and the two jamma + cables (player 3 and 4)?  Theres a few wires coming from each coin mech, I would guess its the bottom one near where the coin hits the trigger.
dmish82:
Only thing im not 100% clear on is which wire from the coin mech should I run to the main Jamma cable (player 1 and 2) and the two jamma + cables (player 3 and 4)?
battletoads:
OK, I'll give it a try
Navigation
Message Index
Previous page

Go to full version