Main > Main Forum
How in the HELL?! - Need some help for tomorrow!
chasmosis:
You can get the groove done with a skil saw if you are very careful... I've don't similar grooves myself with just a skill saw.
Avery:
You can even cut this slot with a straight backed hand saw, a couple clamps and a piece of scrap wood with one straight edge to act as a guide. You'll have to make two parallel cuts. You can probably pop the waste piece out with a medium sized screwdriver.
Power tools let you do things faster, but "things" can include screwing up.
NoOne=NBA=:
I put magnetic catches for kitchen cabinets inside the cab, and glued the metal piece that they use onto the back of the plexi.
That way I can get the glass off in about 3 seconds.