Main > Main Forum
How in the HELL?! - Need some help for tomorrow!
<< < (3/3)
chasmosis:
You can get the groove done with a skil saw if you are very careful...  I've don't similar grooves myself with just a skill saw.
Avery:
You can even cut this slot with a straight backed hand saw, a couple clamps and a piece of scrap wood with one straight edge to act as a guide.  You'll have to make two parallel cuts.  You can probably pop the waste piece out with a medium sized screwdriver.

Power tools let you do things faster, but "things" can include screwing up.
NoOne=NBA=:
I put magnetic catches for kitchen cabinets inside the cab, and glued the metal piece that they use onto the back of the plexi.

That way I can get the glass off in about 3 seconds.
Navigation
Message Index
Previous page

Go to full version