| Main > Main Forum |
| I-Pac problem#2 Solved!!! |
| << < (2/3) > >> |
| AlanS17:
Open up notepad.exe in Windows if you can. Then drop a coin. What's the output? (You can substitute notepad for a DOS prompt or anywhere to see the text display.) |
| joshbr7257:
mine does this too.... when i press 1player start it works fine just 1 coin, but 2plyaer start drops 2 coins? |
| JCL:
Do you have this wired to a real coin mechanism or a switch? A switch probably works correctly, but an old badly adjusted coin mech might be problimatical. I tend to doubt it is the ipac. I think software or other harware is more likely at fault. |
| cdbrown:
I had a problem with a few microswitches that would register 2 clicks every time I pressed the button. Issue was internal to the switch. I slowly pressed in the small actuator on the switch and as it was being depressed it registered one click (closing the circuit), then as I released it registered a second time (closing the circuit). In notepad, instead of it continually repeating the keystroke as it was held down, it only registered once - once button fully depressed the circuit in the switch would become open. |
| Tiger-Heli:
Do you both (Qbert247 and joshbr7257) have coin buttons wired to discrete I-PAC terminal, or are you using the shift function to add coins? |
| Navigation |
| Message Index |
| Next page |
| Previous page |