| Main > Lightguns |
| Light gun to work w/component? |
| << < (2/4) > >> |
| picasso:
OK so for a non-technical guy what would I have to do? Splice some wires? I have s-video on the television as well but I prefer the component picture. Could I just plug the gun into the s-video port and it would work with my component video? |
| JB:
--- Quote from: picasso on July 26, 2005, 12:26:49 pm ---OK so for a non-technical guy what would I have to do? Splice some wires? I have s-video on the television as well but I prefer the component picture. Could I just plug the gun into the s-video port and it would work with my component video? --- End quote --- The first thing I'd try is feeding it the green component video line just as if it was a composite signal. If I'm right about how they work, that'll do it. |
| Smog:
Some kind of RGB connection uses the so called "sync on green". So if you don't have any separate sync signal you should feed the green component in the gun's composite input. |
| picasso:
OK... I will give that a shot and report back. Thanks.. |
| quadmasta:
Doesn't that dongle have composite video out too? |
| Navigation |
| Message Index |
| Next page |
| Previous page |