Main > Main Forum
T MOLDING GUIDE???
mrcram:
I've looked all over here and on the net. I am ordering some T MOLDING for my arcade, but I would like to know how to install!!!
Is there a GUIDE on the internet anywhere that would help me step by step? please help. thank you
Bones:
Instructions.
Step 1) Machine grove with T-slot cutter.
Step 2) Push t-molding into grove.
Step 3) Have cool beer, you are now finished.
Seriously, it is no harder than this.
TalkingOctopus:
Two common problems:
1) It is really hard to push it into the 1/16" slot.
Use a rubber mallet and hammer it in.
2) It won't bend around this corner and fit into the slot.
Remove the portion that fits into the slot for the corner.
tommy:
--- Quote from: TalkingOctopus on July 19, 2005, 01:53:22 am ---Two common problems:
1) It is really hard to push it into the 1/16" slot.
Use a rubber mallet and hammer it in.
2) It won't bend around this corner and fit into the slot.
Remove the portion that fits into the slot for the corner.
--- End quote ---
You could even use some fine nails in the corners or glue.
xonix_digital:
liquid nailz
-=XD=-