| Main > Main Forum |
| Help with wiring marquee light |
| (1/2) > >> |
| u48989:
I am planning on using the original marquee light setup for a cabinet I am modifying. |
| SteveJ34:
Probably.... What voltage did the original wires run to? Is that fuse rated for 120v? |
| u48989:
The fuse is rated for 250 V. If it helps, when I got the arcade, it still had the original power supply, but I threw it away when I first started this. |
| SteveJ34:
I'm sure you'll be fine just splicing an electrical cord with plug to that and pluggin it in to power strip or other power outlet source.... |
| Stingray:
I just took out the original marquee light fixture in mine and junked it. I didn't know if it was any good and it looked like might have been missing some parts anyway. I bought a cheap flourcent battery operated light at Wal-Mart. It was 12 volt, so I just bypassed the battery compartment and wired it directly to the 12 volt leads on the PC's power supply. That way the marquee comes on when the PC powers up. -S |
| Navigation |
| Message Index |
| Next page |