| Main > Main Forum |
| Newbie Questions, help needed |
| (1/3) > >> |
| ooby:
Hi All, I'm new to arcade cabinets and decided that I'd have to build one. I want to build a 4 player control panel and this is giving me the most grief and confusion so if someone can answer my questions I'd be grateful. 1) What are the mandatory buttons that I need? I know I'll need 4 x player buttons and 4 x coin buttons but what about action buttons? I was thinking of 6 for player 1 and 2 and 4 buttons for players 3 and 4. Is that enough? 2) Also do I need any extra control buttons? Like an escape or pause button? 3) I was thinking about getting the joysticks from Happ controls. Should I get 8 way or 4 way, or what about the ones that you can change? I know these are probably pretty basic questions but thats the level I'm at. |
| starnix17:
1. It depends.... a lot of older games use few buttons (I believe most use 2, but I'm not 100% sure). Newer games (fighting, etc.) usually use at least 4 buttons. 2. I'd put on a button to enter and escape a game, but you can use a combination of buttons like Player 1 quarter button + player 1 button to exit a game etc. 3. Once again it depends, if you like older games then go with a 4 way, if you play newer games then go with an 8 way. I've never played around with the ones that change so I can't tell you about them. -Tony |
| daveg2000:
Extra buttons I have besides the normal ones for each player are: 3 mouse buttons, pause button, volume up, volume down button. The rest of the commands (ESC, TAB, etc....) I have programmed as multiple button presses throughout the control panel. (which you can do with a keyboard encoder.. I use an IPAC4) |
| ooby:
Thanks guys. I was planning on using the IPAC4. Is it easy to wire up to do multiple button presses? |
| RTSDaddy2:
Not to oversimplify, but you will be amazed - AMAZED - at how easy it is to hook up the IPAC. Man, I know zilch about electronics, but I got mine right on the first try. Regarding switchable joysticks, I suppose it's a matter of preference...I have Ultimarc's T-stick plus sticks in mine, which are switchable from the top and I love them! So nice to not have to lift the panel top everytime! At one point early on, however, I didn't have them put back together correctly (it was my fault, and it wasn't that hard a fix) and they would not switch from the top. At the time I wasn't sure what was wrong with them, so I just switched them from underneath...and I found that NOT to be that big a deal either. |
| Navigation |
| Message Index |
| Next page |