Main > Main Forum
Screws
(1/1)
olsteve:
Just wanted to put a plug in for a product I used on my cabinet and liked - SPAX screws.

http://www.spax.com/usa/spax.htm

I used 3/4 MDF and some pine ledgers. I didn't need to pre-drill any of the holes. I didn't use any glue. I didn't have any breakage in the MDF and no splitting on the pine. It also seems very secure so far....time will tell a little better. Just my .02 for anyone looking for suggestions.

Steve O.
DaFoo:
 :o Nice tip!  I'm just starting and was looking for a good Screw  ;)
CJK:
I'd always use glue in addition to screws with MDF.

-- Chris
Navigation
Message Index

Go to full version