| Main > Main Forum |
| Please delete this thread...stupid question has been answered...thanks |
| (1/3) > >> |
| conseit68:
Ok bartop in wiring stages...I have a GP-Wiz that I am using. Found wiring diagrams on the boards for the Key-Wiz and received the wiring diagram for the GP-Wiz from RandyT. Question is are the board labels and pinouts the same? The reason that I ask is because the GP-Wiz diagram is a bit vauge and does not match the Key-Wiz diagram...Please help so I can finish this project and actually play a little |
| SteveJ34:
I've used both Key whiz and GP Whiz in different projects. The Key Whiz is a keyboard encoder, seen as a keyboard encoder. The GP Whiz is a gamepad device, seen as a gamepad with a joystick and some number of buttons. I don't have either in front of me but the 40 pin headers (if you go that route) do not have the same "pinouts" exactly, no. What exactly is the question(s) you are asking regarding the pinouts for the GP Whiz that are not defined within the document Randy supplies with shipment? |
| conseit68:
well i am using the GP-Wiz and the diagram that i have from randyt dosent show anything but numbers. So i suppose i need someone to tell me what wires on the ide cable i will use :'( |
| markrvp:
--- Quote from: conseit68 on June 30, 2005, 04:41:48 pm ---Ok bartop in wiring stages...I have a GP-Wiz that I am using. Found wiring diagrams on the boards for the Key-Wiz and received the wiring diagram for the GP-Wiz from RandyT. Question is are the board labels and pinouts the same? The reason that I ask is because the GP-Wiz diagram is a bit vauge and does not match the Key-Wiz diagram...Please help so I can finish this project and actually play a little --- End quote --- |
| conseit68:
so do i have to manually program 1pstart, coin, and esc.? |
| Navigation |
| Message Index |
| Next page |