Main > Reviews

Super Ultra-Mega Massive 49-way Review online at Retroblast!

<< < (2/17) > >>

JoeB:
I currently have a couple of super's (or is it competition ..) 8 way joysticks on my panel.  How hard is it to replace them with 49-way joysticks? Will I need to drill new holes? or am I stuck making a new panel?

thanks.

KenToad:

--- Quote from: JoeB on June 28, 2005, 02:14:02 pm ---I currently have a couple of super's (or is it competition ..) 8 way joysticks on my panel. How hard is it to replace them with 49-way joysticks? Will I need to drill new holes? or am I stuck making a new panel?

thanks.

--- End quote ---

I replaced the second joystick on my panel, a super, with a 49-way.  One problem might be that you, like me, mounted the supers with the long side vertical.  The 49-way joysticks must be mounted horizontally, with extra room on the left side for the connector on the 49-way joysticks.  I haven't actually physically matched up the holes on the two different types of joysticks, so, in your case, if you haven't got them mounted vertically, I would check out Markrvp's template.  You can print it out at 100% and match it up to your setup.

Here is the link:

http://forum.arcadecontrols.com/index.php/topic,35820.0.html

Hope that helps.

Cheers,
KenToad

*Edit* That topic has been updated and somehow I missed it.  You can mount the 49-way joystick with the long edge vertical.  You just have to unscrew the assembly and reorientate the PCB to face left to get it to work normally with the GPWiz-49.  Also, do a search for super joystick template and you could just compare the two printouts.

fl0yd:
I thought the review was great!

Another thing to note about replacing a super with a 49-way is the hole used for the shaft.  If you are using wood, a 1 1/8" hole works for the shaft, but the 49-way joystick needs 1 1/4" to not 'bump' into the wood.  The bumping doesn't stop the diagonals from being registered, it just has a different feel than normal.

KenToad:
Thanks Floyd.  I've really enjoyed your product.

Cheers,
KenToad

markrvp:
GREAT JOB!!!  That was a really well written article (I'm not just saying that because I got mentioned).  Very objective and gave both the positive and negative aspects.  I think anyone reading that has all the info they need to make their purchasing decisions.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version