| Main > Main Forum |
| i'm looking for good molex type connectors for control panel? |
| (1/1) |
| thetered:
I'm trying to find a suitable connector for my control panel so I can swap CP's back and forth, does anyone know of any good ones that have atleast 12 pins each? |
| Tailgunner:
AMP Mate N Lock connectors would do nicely. Bob Roberts has them as they've been used in quite a few arcade machines. |
| Ken Layton:
I disagree completely on using AMP brand products. They are only resaonably priced if you are a manufacturer and buying their products in 100,000 quantities. For the average Joe AMP products are way way overpriced. I refuse to buy their stuff. Go to mouser.com and buy Molex stuff instead. It's a lot cheaper. Mouser part numbers: 538-03-09-1125 Receptacle, 12 pin, .093" (59 cents each) 538-03-09-2122 Plug, 12 pin, .093" (45 cents each) 538-02-09-1119 Female terminal, .093" (8 cents each per 100) 538-02-09-2118 Male terminal, .093" (10 cents eac per 100) |
| thetered:
Thanks for the info, those are what I was looking for, but I wanted to see a picture to be sure and I found them over at www.jameco.com and they were quite a bit cheaper, on my order I saved a little over 10 bucks verses mouser. Just thought you might be interested for future reference. |
| Navigation |
| Message Index |