Main > Main Forum
wow i got it to work THANKYOU!
paradox:
ive tried dip 2 on bank a and it doesnt work!! the screen is still the same way.
i think all the power wires are connected as the thing wouldnt come on would it (lol)
let me see 3-6 and c-f erm?????
yes there wired
so the dips dont work?
or is it a fault so its going straight into testmode regardless
of any dip changes becuase tilt doesnt work
here is a closer pic of the jamma wires:
and here is the testscreen????COINA:OFF:
how do i get this game on???
the dips dont change anything
the coina is doing my head in ::)
CheffoJeffo:
--- Quote from: paradox on June 24, 2005, 01:34:25 pm ---i think all the power wires are connected as the thing wouldnt come on would it (lol)
--- End quote ---
It could ...
Not sure what to suggest other than grab a multimeter and check voltages ... and that is not my area of expertise.
Sorry.
Cheers.
RayB:
UMMM according to that most recent photo, it would appear all switches are being detected as ON! Everything should be OFF, unless you're pressing a button... Sounds to me like there's a short somewhere aong the inputs. Why else would it say "tilt ON" if you don't even have a tilt switch?
Check your jamma harness (the connector) and make sure all those solderd contacts are not touching each other.
You might even have to resort to disconnecting all buttons and joysticks to try and narrow down the short. (If anyone can confirm that I'm not way off here, please chime in before this guy wastes more time).
And another thing, you still haven't said WHICH MANCHESTER!!!
CheffoJeffo:
--- Quote from: RayB on June 24, 2005, 05:18:02 pm ---UMMM according to that most recent photo, it would appear all switches are being detected as ON! Everything should be OFF, unless you're pressing a button... Sounds to me like there's a short somewhere aong the inputs. Why else would it say "tilt ON" if you don't even have a tilt switch?
--- End quote ---
Doh!
Yeah, sounds right ...
Cheers.
AlanS17:
... unless ON just means "active" and that the buttons are ready for use. Does the manual say anything about the test mode operation?