Main > Main Forum
Will a coin door operate ok with a jpac?
(1/2) > >>
eggedd2k:
i've got a jamma cab with an electronic coin mech and credit board. obviously this all wires up to the jamma connector.  i'm planning on putting a jpac in it to connect my mame computer up.

my question is will the coin mech still function (and give credits) to the mame computer via the jpac without any changes being done? 
AlanS17:
Yes, but the coin counter won't function properly.
wpcmame:

--- Quote from: eggedd2k on June 20, 2005, 05:38:20 pm ---i've got a jamma cab with an electronic coin mech and credit board. obviously this all wires up to the jamma connector.
--- End quote ---
pcb:

--- Quote from: wpcmame on June 20, 2005, 05:59:07 pm ---The JPAC doesn't supply 12V. If the coin mech gets its power from the jamma connector you need to connect it to another source.

--- End quote ---

Um.
eggedd2k:
i thought the coin door was powered directly via the PSU in the cabinet? i'll have to trace the wires.  i dont really want to have to do any soldering or modding to the wiring.
Navigation
Message Index
Next page

Go to full version