| Main > Main Forum |
| Help with wiring and hookup please! |
| << < (2/4) > >> |
| Goz:
Another way to go for the wire and quick disconnects is the lazy approach. You can buy a JAMMA harness for about $10 that has all the quick disconnects already attached to the wires on the harness. Dream Arcades has one that would be suitable. Simply cut the wires off at the JAMMA connector and you have wires of different colors that are plenty long with connector on em ready to go and especially a nicely daisy chained ground wire. You could wire a CP in under 30 minutes if you were in a hurry. Just a thought. -Goz |
| joshbr7257:
ummm.... im just confused seeing so many wires in that picture, i know it doesnt make sense but i think doing 1 wire at a time will be easier for me. ;D |
| markrvp:
Read this. Wait for the 85 some odd pictures to download so you can see the examples. http://www.ogredog.com/mame_cp_construction.htm |
| joshbr7257:
so do i need to buy maleand female disconnects? |
| markrvp:
--- Quote from: joshbr7257 on June 17, 2005, 07:50:34 pm ---so do i need to buy maleand female disconnects? --- End quote --- The microswitches require the female disconnects (like the one Peale has on his site). If you are going to an Ipac then you won't need male disconnects. You only need male disconnects if you are making a splice that you want to disconnect occasionally. |
| Navigation |
| Message Index |
| Next page |
| Previous page |