| Main > Main Forum |
| Is this a good price for smoked lexan? |
| << < (2/3) > >> |
| nyconx:
I think my problem is that I called a glass shop. I need to find a plastics company. What do you guys look under in the phone book to find a plastics company that would do such a thing? any helpful tips? Thanks |
| Granger:
As far as cutting the plexi/lexon yourself, a cutter goes for about $5. just score the plastic (using a straight edgeas a guide) and snap it off. |
| Stingray:
--- Quote from: nyconx on June 16, 2005, 07:26:11 pm ---I think my problem is that I called a glass shop. I need to find a plastics company. What do you guys look under in the phone book to find a plastics company that would do such a thing? any helpful tips? Thanks --- End quote --- I know this sounds tricky, but I looked under "plastics". ;) -S |
| TOK:
I wanted to use the original bezel that came with my cab, but wanted the darker look, so I tinted with automotive tint. It made a HUGE difference in the appearance of the machine and was very inexpensive to do. I'm sure this could be done with clear plexi, too. I used 20% tint for mine, but even 15% (lower number is darker) would be good. |
| FractalWalk:
--- Quote from: AlanS17 on June 16, 2005, 05:01:38 pm ---The smoked glass hides the fact that you don't have a bezel underneath (assuming you have no bezel) so you don't see everything around the inside of the machine. --- End quote --- The other benefit is that it makes the picture look better. |
| Navigation |
| Message Index |
| Next page |
| Previous page |