| Main > Main Forum |
| help with a wobbly control panel base (showcase cab) |
| << < (5/13) > >> |
| IntruderAlert:
wait a second.. you're talking about your MAMESTROSITY cab? If you've got the control panel base mounted securely to the rest of the cab I don't see how it could wobble that much maybe instead of looking at the feet you should be looking at a better way to bolt everything together securely |
| hulkster:
--- Quote from: quarterstringer on June 15, 2005, 04:49:21 am ---I remember someone had the same problem last year. Oh wait, it was you. --- End quote --- |
| IntruderAlert:
take some pics of the whole thing from the sides and from the top I've been looking at your project and am a little worried about the way that everything is held together with those L brackets That may be the root of your problem But right off the bat I'm thinking about 2 long pieces of MDF maybe 6" wide or so screwed along the bottom of the entire thing on the right and left sides like baseboard trim on a wall with several screws in each section You'd want the screws long enough to go almost through or all of the way through Recess the screws a little and fill in with spackling, paint it all black of course and put black T-Mold on the edges of it That shoud help tremendously But if you post some pics we might see some alternative methods of fastening it all together |
| MrSaLTy:
Happs has real arcade levelers and mounting plates here...... http://www.happcontrols.com/amusement/acesor/cab.htm |
| AlanS17:
Most large machines that I've seen that come in more than one piece just slide together and then bolt down in a couple spots. You just need a way to interlock them. Mounting them flush against each other won't do the trick. |
| Navigation |
| Message Index |
| Next page |
| Previous page |