Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Free Items - Official Thread  (Read 112823 times)

0 Members and 1 Guest are viewing this topic.

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12945
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Free Items - Official Thread
« on: May 09, 2005, 11:02:38 am »
Occasionally, members will have items for which they no longer have a need.  One of the nice things you can do is give the item away to another member.  

Some basic rules:

1) This thread will be used *only* for posting of free items.  Discussion will not be allowed.  PM the person offering the item.  After the item is claimed, delete the message offering the item.  This way the thread won't be cluttered.

2) Asking for money for items in this thread is not allowed, other than the cost of shipping.

3) Trades aren't allowed either.  Giveaways *only*.  Trades belong in the rest of the forum.

4) Local pickups are excellent, but if an item must be shipped, the person offering the item must either ask a *reasonable* amount for shipping (eg - don't ask $10.00 to ship a single button).  And, of course, offering to pick up the shipping yourself is a very generous gesture.
« Last Edit: February 28, 2012, 07:05:44 am by SirPeale »

Thenasty

  • Trade Count: (+16)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4153
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Free Items - Official Thread
« Reply #1 on: May 15, 2006, 08:40:18 am »
FREE ARCADE VGA BREAKOUT CABLES.

Just pay $6.00 for s/h to USA only.


I make this cables as I find Monitors being thrown away. I snip the cables and make it usefull.

I now have plenty of VGA cables. Got them from a company that purchased new monitors and used the DVI/HDMI cable instead of VGA.
Each one of this cables makes 2 VGA Breakout.
See pic below.


All that I make are fully tested in my Arcade Monitor Mame Cab (Guaranteed working).


A diagram below to make one yourself.
Pins mark with * you don't use.
If Pin 9 exist on your cable, consider it *.
In order to get composite, you just need to twist 2 wires (13 & 14) and connect to your monitor SYNC.
Use a multimeter continuity to trace what cable is what. Don't go by the colors of the wires.
Connect all GND together.
The RGB should be easy to figure out.



FREE POWER SUPPLY 200watts+ OLD TOGGLE SWITCH TYPE ($10.00 for S/H).
http://forum.arcadecontrols.com/index.php?topic=101280.0
« Last Edit: January 31, 2016, 10:23:10 am by Thenasty »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

daywane

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2318
  • GRRRR!
Re: Free Items - Official Thread
« Reply #2 on: August 18, 2006, 04:16:37 pm »
free.... local pick up
I have a few arcade cabs free for pick up in Lawrenceburg KY
empty boxes... I took the controlls ....... Had them up and running but had to give up the play room for my 11 year old bed room.... we expanded living room and took her bed room to do it.   She now has my game room and I only have room for 3 arcades
Nintendo VS omni and MS PAC won
super PAC, omega race, a 2 player (360deg ) racing arcade ( forget the name) a few drinks to many at this moment :cheers:  :dizzy: I am keeping the st erring wheels and gas pedal ( I paid $100.00 for it)
if you need a cab to start a Mame cab I can help you out big time.....
zip code 40342

not in no rush... I have a LARGE barn... stored nice.... a few mice but no real damage will get to the cabs

eastbayarb

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 299
Re: Free Items - Official Thread
« Reply #3 on: April 04, 2011, 08:52:03 pm »
Please help, as I need to move a TV and arcade machine to my new place after having to move unexpectedly. The drive is only 5 minutes away from my old place to my new place, and in return, I will give you a Showcase arcade cabinet. Here is a larger picture of what is included:

http://img687.imageshack.us/img687/8095/showcasecab.jpg

The cabinet I am offering was a project MAME cabinet that I couldn't finish, and my old landlord needs it out of my old garage. The monitor is not attached, but is included.

Please call Antonio ASAP 415-572-3713 (please no texting or emails) - I have NO TIME for flakes, so unless you can help me, please don't call. You will need a large van or truck to transport this. I am in the east bay area in El Sobrante off of highway 80 going out towards Vallejo.

jasonbar

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2080
  • Dr. Inferno
    • The Infernolab
Re: Free Items - Official Thread
« Reply #4 on: May 28, 2011, 03:37:56 pm »
Want to get rid of:

Instruction booklet manual for Radar Mission for Game Boy Gameboy.

Slight crease from top to bottom near right side.

$1 shipped in a simple USPS envelope w/ a plain old stamp.

Thanks,
-Jason

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12945
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Free Items - Official Thread
« Reply #5 on: June 30, 2011, 10:47:22 am »
Nonworking Hantarex 900/e.    Plus two chassis, of which I think one works.  IIRC it's missing transistors.  Pickup only in 05301.

Nephasth

  • Guest
  • Trade Count: (0)
Re: Free Items - Official Thread
« Reply #6 on: June 30, 2011, 08:12:30 pm »
Operation Wolf -- Cheyenne, WY -- Pickup Only

When I got this the game would not come on. After some light troubleshooting, I found the power supply to be defective. I swapped it out with a known good power supply and the game came on. My good power supply will not be included (my only spare). Monitor has burn in. Also, the monitor will not focus (hard to read text and graphics are blurry), possible bad flyback. Cabinet has a lot of water damage. Game coins up and you can start the first stage. No sound. No gun recoil. Marquee does not light up. When you pull the trigger the screen flashes indicating a shot has been fired and ammo is depleted. Hits will not register though, I believe this is because of the monitor focus issue, I may be wrong though. No back door and missing the "anti-glare" glass that goes between the monitor and mirror. Thought I would offer this up for free before I part out what I am able to (which isn't much) and/or trash it. Not expecting to see any interest in this, but I can send pics on request.

mrtuesday42

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
Re: Free Items - Official Thread
« Reply #7 on: July 03, 2011, 09:12:33 pm »
FREE to a good home. ORLANDO, FL.
full size arcade cabinet. peeling and wood exterior, street fighter 2 jamma inside. monitor, board, psu, all work and game works. no controls though. i have a some random parts from my last build i will include as well. if no one is interested soon i will through this sucker on craigslist but i would like to give you guys first dibs. :D

email: mrtuesday42 AT aim.com

windmill

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 27
Re: Free Items - Official Thread
« Reply #8 on: August 19, 2011, 05:30:53 pm »
You can read the sordid story as to how I got an extra chassis and why it is slightly defective in this thread. Thanks to the good advice from the people here on this forum, plus a new voltage regulator transistor, I got my monitor working.

So, if anyone wants this chassis (Wei-Ya 825), it's free to a good home. Again, this chassis is slightly damaged due to being powered up without an isolation transformer. Replacing the voltage regulator transistor should fix it. All I ask is that you pay the shipping cost. I'm guessing it will be in the $10-$13 range for the continental US. First person to shoot me a message with an address is today's lucky winner. Paypal preferred, but a check is fine (If it's good enough for Bob Roberts, it's good enough for me!)



J_K_M_A_N

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 714
Re: Free Items - Official Thread
« Reply #9 on: October 03, 2011, 02:35:54 pm »
Free: NEC 3PG 27" Monitor. I was using it as a TV in the bedroom. It has BNC (comes with BNC to RCA adaptor) and S-video inputs as well as RCA audio inputs. It also has a 15 pin VGA connection (with cord included) and (I think) 5 color BNC connections. Back in the day I had it hooked up and it CAN run 1024x768 with the correct refresh rate even though the book says 800x600 is max.

Must pick up in Burnsville, MN. South of Minneapolis and Bloomington (south of the river).

J_K_M_A_N

Encryptor

  • Trade Count: (+34)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1284
Re: Free Items - Official Thread
« Reply #10 on: November 24, 2011, 07:50:58 pm »

Free - Old radio cabinet for possible jukebox project. It's in rough shape and completely empty.

Local pickup only approx 20 miles SW of Albany, NY.

If you want to see a restored radio of the same model look here.

http://www.welcomebackradio.com/alan29K.htm

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5944
  • What Me Worry?
Re: Free Items - Official Thread
« Reply #11 on: December 21, 2011, 06:03:00 pm »
Free Sound Blaster Live card.  Has cables and was working when pulled.  Give me your postal or zip code and I will get shipping cost for you.  Good for sound if you are setting up a W98 or XP MAME install.

Edit: Sill Available
« Last Edit: December 26, 2011, 10:54:44 pm by BobA »

Gray_Area

  • -Banned-
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3363
  • -Banned-
Re: Free Items - Official Thread
« Reply #12 on: February 17, 2012, 05:24:16 pm »
gone: IBM keyboard
« Last Edit: February 21, 2013, 02:04:27 pm by Gray_Area »
-Banned-

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12945
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Free Items - Official Thread
« Reply #13 on: February 28, 2012, 07:03:42 am »
Deleted any post older than a year (there were posts much older than that) as well as any posts that stated that the item was claimed. 

Also, please do not discuss items in this thread.  Take it to PM.  Thank you.

jimmy2x2x

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1220
Re: Free Items - Official Thread
« Reply #14 on: March 01, 2012, 04:08:09 pm »
4 free cabs:

Fresno, CA

http://www.reddit.com/r/cade/comments/qcmgf/selling_some_cabinets/

NOT MY AD, JUST PASSING IT ALONG

JaXxX

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
Re: Free Items - Official Thread
« Reply #15 on: March 13, 2012, 11:00:07 am »
I have a  street fighter cabby I'm looking to unload. Located in Baltimore, MD. Cabinet was converted for MAME use and has 360 controllers installed in the control panel already. Free to good home. It currently has a 24" Samsung LCD in it I will include for $100 if someone wants that too, but the cabinet by itself is free. I just don't have the space for it anymore so I'm converting to a smaller setup. If someone wants it with the LCD would only require a PC to be ready to roll.

Rando

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 462
Re: Free Items - Official Thread
« Reply #16 on: March 13, 2012, 11:31:44 am »
Child's Harvard multi-gaming table:

Pool table, table hocky, board game table, Mini Ping pong, Foosball top.  Great for kids around 5-8, the two games that got the most usage at my house was as the Pool (with tiny poolballs) and Foosball.  Also shuffle board things and soft horse shoes included, believe I have all pieces/parts.  Only damage to table is one of the hockey goals needs to be screwed back in.

Table is in good shape, kids outgrew and I got a bigger pool table (6') and Air Hockey (7').  Pic/dimensions available, but very similar to pic below, though that one doesn't seem to have pool.  Currently constructed, legs can be removed for transport if necessary.  I don't have time to ship anywhere.

Don't need to sell, local pickup only, located in Basking Ridge, NJ, let me know if any takers.  Otherwise I'll place on curb this weekend and put the over/under on 90 minutes on how long it will stay out there.
« Last Edit: March 13, 2012, 11:33:24 am by Rando »
Rando - My build thread: http://forum.arcadecontrols.com/index.php?topic=107741.msg1142843#msg1142843 (work slowed but still progressing!

stevodevo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 112
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #17 on: July 03, 2012, 10:55:59 am »
This was my original gaming PC that I converted to a MAME cabinet... I've recently rotated the wife's old Dell into use as the MAME PC so this one is taking up space.

From memory, it's an AMD 1800+ XP (overclocked to 2100+) on an Epox EP-8K7A mobo with either 1 or 2 Gb of ram.  It's already been capped to auto turn-on when power is supplied but this could easily be reversed.  It includes a CD-Rom drive but no HDDs.

This ran all my MAME games just fine.  It struggled on some 3D games such as those in the ZiNC emulator but would be great as a MAME-only PC.

Location: Paducah, Kentucky if you want to pick it up free.  Otherwise, email or PM your zip and I'll get a shipping quote.

Thanks!

EDIT: GAH! Ok before I get too many more requests, let me reiterate that this is barebones... I forgot that I already scavenged the PSU and the GPU for my current MAME PC.  I may have a PSU I can throw in but let me know if you want that - it'll def. add to the shipping cost.  So essentially what you're getting is the case, a CD-Rom drive, the Epox Mobo, 1 Gb ram (confirmed) and the AMD 1800+ XP (OC'd)...
« Last Edit: July 03, 2012, 02:58:28 pm by stevodevo »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16232
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Free Items - Official Thread
« Reply #18 on: September 04, 2012, 09:33:10 pm »
Free: Mad Dog McCree CD-Rom

I have a Mad Dog McCree CD-Rom. It's the DOS version. Buyer just pays $2 for shipping and handling.
***Build what you dig, bro. Build what you dig.***

stevodevo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 112
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #19 on: September 18, 2012, 01:05:32 am »
This was from my outlaws old HP.  I'm talking OLD.  It would be great for a retro cab that wasn't intended to run newer games.  From what I understand it's a 450 Mhz machine (yes, Mhz!) but can be overclocked via dipswitches to a whopping 550 Mhz!  It has 64 mb of ram but combined with the above post for free ram you'd be golden!

Item location is Paducah, KY otherwise PM with your zip and I'll shoot you a shipping quote.

Cheers
Steve

Minwah

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7657
    • MAMEWAH
Re: Free Items - Official Thread
« Reply #20 on: December 12, 2012, 05:02:04 am »
I have a working Silicon Graphics 21" CRT PC monitor if anyone wants it. Re-badged Sony Trinitron, very good (and very large). Collection only from Oxfordshire, UK.

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5091
  • Intellivision Rocks!
Re: Free Items - Official Thread
« Reply #21 on: December 31, 2012, 01:08:16 pm »

Free Crypt Killer CP and pedestal.  Dynamo Showcase style.  No controls included.  Pick up only in Indy.  No free shipping.  CP and pedestal in average (or better) condition. 
Ajax should have been named Warlord, not Swan.

First off, Hoopz is right.

cw

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Game over man game over
    • The Cab
Re: Free Items - Official Thread
« Reply #22 on: January 23, 2013, 07:07:27 pm »
Space Duel cab      this is a project cab with no pcb or monitor. Artwork is in good shape and the cab has some minor swelling on the bottom.

Austin Tx

78758
gone
« Last Edit: June 02, 2013, 09:55:13 pm by cw »

cw

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Game over man game over
    • The Cab
Re: Free Items - Official Thread
« Reply #23 on: May 30, 2013, 07:30:46 pm »
Stun Runner. complete, not working. 

nemesismachine

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #24 on: June 05, 2013, 10:20:57 am »
(Mortal Kombat II cabinet)

Power supply, power cord/transformer, marquee light, wiring harness (minus ground wire)

Just pay shipping from 21157

jasonbar

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2080
  • Dr. Inferno
    • The Infernolab
Re: Free Items - Official Thread
« Reply #25 on: June 10, 2013, 01:05:39 am »
Free goodies that I've removed from my MAME cabinet. Well, free, but I wouldn't turn down a buck or two to go towards my shipping costs...

!!!GONE!!!1: 21 feet of 3/4"-wide red T-molding from gamemolding.com. I bought extra in case I messed up. I failed to mess up.!!!GONE!!!
2: 2 modified bicycle frame-mount U-lock brackets. These are perfect for holding ACT Labs silver pistol light guns [which I no longer have]. See this old post of mine for inspiration: http://forum.arcadecontrols.com/index.php/topic,66908.msg677659.html#msg677659
!!!GONE!!!3: 2 yellow bicycle water bottle cages, which act splendidly as drink holders  for your glass bottles, aluminum cans, red Solo cups, coffee mugs, even your wine glasses! [I mounted my new light gun holsters where these once were--worry not, I still have 2 more drink holders remaining on my cab]

Hit me up if you're interested. Pick up in the SGV in Los Angeles, or shipping from 91103.

Thanks,
-Jason
« Last Edit: June 20, 2013, 12:54:24 pm by jasonbar »

cools

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 510
  • Arcade Otaku sysadmin...
    • Arcade Otaku
Re: Free Items - Official Thread
« Reply #26 on: August 06, 2013, 03:38:04 pm »
Nanao MS8-18FB chassis. Not working, it's missing a hybrid (scavenged to fix another chassis). I'd keep this for more spares but I have working MS8-18 chassis so it's no longer required.

25 cent coin mech (weighs 650g unpacked).

Electrocoin Neo Geo Upright Manual

Chungwa M34AFA60X tube and VGA yoke - burn free. known to be working

Toshiba 470MSB22 tube - burn free. unknown if working or not. I know the neck (and vacuum) are still intact though.

Pics here: https://plus.google.com/photos/106019571274193779309/albums/5909089898772087233

Just pay shipping. I am willing to pack (nothing fancier than bubble wrap/polystyrene/cardboard though) and ship the tubes but this is at your own risk!

Note: I'm in the UK.
Please don't PM me with support questions. Ask in public so everyone can learn!

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #27 on: August 14, 2013, 09:15:49 am »
Don't expect this to last at all.

Have a geforce 8800 gts that was that had artifacts. for the lawls i reflowed the solder on the gpu and now it works just fine. Ran it through 3dmark a few times yesterday. Includes original box.


gone
« Last Edit: August 14, 2013, 09:49:18 am by 404 »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #28 on: August 14, 2013, 09:30:57 am »
Don't expect this to last at all.

Have a geforce 8800 gts that was that had artifacts. for the lawls i reflowed the solder on the gpu and now it works just fine. Ran it through 3dmark a few times yesterday. Includes original box.

DIBS! you have my paypal, send me a request for the shipping cost :)
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2768
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Free Items - Official Thread
« Reply #29 on: August 14, 2013, 09:33:41 am »
In the face of sounding even more like AJ... I am SUBSCRIBED.

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #30 on: August 14, 2013, 09:35:41 am »
Don't expect this to last at all.

Have a geforce 8800 gts that was that had artifacts. for the lawls i reflowed the solder on the gpu and now it works just fine. Ran it through 3dmark a few times yesterday. Includes original box.

DIBS! you have my paypal, send me a request for the shipping cost :)

sorry man, its already pending on another forum. literally lasted 3 minutes there  :-\

Should have asked you first. would have just thrown it in for free with the am2 set.  :-[

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #31 on: August 14, 2013, 11:25:02 am »
no worries, I have some lesser video cards *somewhere*
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2768
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Free Items - Official Thread
« Reply #32 on: August 14, 2013, 11:33:25 am »
sorry man, its already pending on another forum. literally lasted 3 minutes there  :-\

That's not cool, man.

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #33 on: August 14, 2013, 12:19:13 pm »
sorry man, its already pending on another forum. literally lasted 3 minutes there  :-\

That's not cool, man.

why wouldn't it be? Should i have just posted it here? Wouldn't that be just as greedy of me?

I mostly frequent PC forums and they have freebies threads that give away tons of great stuff all the time. Many of which have helped me out in a bind or two. Why should I hold out on them just to post it on BYOAC?

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2768
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Free Items - Official Thread
« Reply #34 on: August 14, 2013, 12:40:02 pm »
why wouldn't it be? Should i have just posted it here? Wouldn't that be just as greedy of me?

I mostly frequent PC forums and they have freebies threads that give away tons of great stuff all the time. Many of which have helped me out in a bind or two. Why should I hold out on them just to post it on BYOAC?

I'm sure that's consolation to the person who thought they had a chance at it for posting dibs first. If it were me, I'd rather not have seen it at all than think I had a chance at it after posting. So yeah, in my opinion, you should have either a) held out on them or b) held out on us. Post it in one spot, and then if it doesn't sell, post it elsewhere.

I realize this isn't E-Bay, but still. Common courtesy is always a better way to go.

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #35 on: August 14, 2013, 12:47:55 pm »
I'm sure that's consolation to the person who thought they had a chance at it for posting dibs first. If it were me, I'd rather not have seen it at all than think I had a chance at it after posting. So yeah, in my opinion, you should have either a) held out on them or b) held out on us. Post it in one spot, and then if it doesn't sell, post it elsewhere.

I realize this isn't E-Bay, but still. Common courtesy is always a better way to go.

Again, Why? You aren't really giving a reason here at all.

I post on multiple forums and there's nothing anywhere that states i couldn't post a FREE item on anyone of those forums at any given time. I actually posted it here before i even posted it on other forums. So technically BYOAC got about a good minute head start over H, TPU and other sites.

As with any freebies it's always on a "you snooze, you lose basis". I can't help that and I'm not going to pick and choose who is going to get it. If i did, I would have just offered it up to reputable members on any site i chose via pm; completely killing any basis for a freebies post in the first place.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2768
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Free Items - Official Thread
« Reply #36 on: August 14, 2013, 12:58:08 pm »
Again, Why? You aren't really giving a reason here at all.

I certainly am. If you don't know what "common courtesy" means, then I'm not about to explain it to you.

I post on multiple forums and there's nothing anywhere that states i couldn't post a FREE item on anyone of those forums at any given time.

While that is certainly true, there's also nothing that says, "I'll pick and choose whatever person I like, regardless the speed at which they response" and you could completely do that as well, but that doesn't mean you should, right?

It's my opinion, and obviously not shared by you. That's fine. I just find it pretty rude to post a free item that you know will have a lot of interest, knowing that there's going to be someone who wanted it, and then would lose the opportunity to have it.

Maybe I'm in the minority here, but that's my opinion.

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #37 on: August 14, 2013, 01:39:34 pm »
Again, Why? You aren't really giving a reason here at all.

I certainly am. If you don't know what "common courtesy" means, then I'm not about to explain it to you.

I post on multiple forums and there's nothing anywhere that states i couldn't post a FREE item on anyone of those forums at any given time.

While that is certainly true, there's also nothing that says, "I'll pick and choose whatever person I like, regardless the speed at which they response" and you could completely do that as well, but that doesn't mean you should, right?

It's my opinion, and obviously not shared by you. That's fine. I just find it pretty rude to post a free item that you know will have a lot of interest, knowing that there's going to be someone who wanted it, and then would lose the opportunity to have it.

Maybe I'm in the minority here, but that's my opinion.

I guess I'll have to break this down into simple bullet point sentences for you to understand.

-I posted a freebie on a first come first serve basis.

- I posted it here first.

- I then proceeded to post it on 3 other forums.  because i have contributed to those forums in the past and most importantly,  Because I CAN

- I did not pick and choose who i gave it to. A person asked for the card on another forum FIRST.


Consider sitting back and re-read what you posted. You sound hilariously childish. It's a freebie. I didn't have to post it anywhere and i to be honest, i could have pick and choose who i gave it to anyway but I didn't.   :blah:




Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #38 on: August 14, 2013, 05:32:51 pm »
Its my fault really, I didnt want to be too greedy so I waited 15 minutes till after he posted it to reply, to give someone else here a shot at it. I dont NEED it as much as I WANT it. No gripes, if I was the other person that replied on the other forum I'd want the card too, and I respect that. I didnt consider that he had posted it elsewhere, next time screw you guys Im posting first ;)
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #39 on: August 16, 2013, 08:05:32 am »
have a steam code for the game toki tori. Only one and it's first come first serve. PM me for the code

haven't posted this anywhere else so nobody can get butt-hurt over that.  ::)


gone to rabidfrog
« Last Edit: August 22, 2013, 11:00:39 am by 404 »

OpFlash

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
Re: Free Items - Official Thread
« Reply #40 on: August 21, 2013, 12:55:54 pm »
Hey everyone I wanted to throw this out there for someone who may want to come and grab some free stuff...  I want to give back to this awesome group of people some of who helped me get my own MAME project finshed.  Anyway heres what I have....

Electrohome G07 19" has some slight tron burn in..  The monitor powers up fine only thing is that its missing the nut for the horizontal width coil.

A second Electrohome G07 19" this one has the faintest burn of something but its really like none at all Im being picky.  Powers up fine same issue with the horizontal width coil.

Hanatrex Polo 25" monitor complete but missing the frame.  It powered up but I didnt have the time to fully test it.  I believe I have the complete power supply for this monitor.  This monitor / power supply came out of a Mortal Kombat

Good stuff I live in Chicago on the North Side  Would like to have this stuff moved ASAP as im really in need of some space.
feel free to PM me and we can figure out a time to come by. 

OpFlash

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
Re: Free Items - Official Thread
« Reply #41 on: August 21, 2013, 04:01:22 pm »
No takers on the monitors???  Im really not in the mood of trying to post ads on craigs list /ebay and dont want to put em in the alley for the junkers...  Anyone want just the frames and or chassis let me know I would be willing to ship out if the shipping is paid for.

Raktageno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 50
  • Witty Comment!
Re: Free Items - Official Thread
« Reply #42 on: August 21, 2013, 04:44:54 pm »

No takers on the monitors???  Im really not in the mood of trying to post ads on craigs list /ebay and dont want to put em in the alley for the junkers...  Anyone want just the frames and or chassis let me know I would be willing to ship out if the shipping is paid for.

Hi there! I have been wanting to get started building my own cabinet and lucked into a shell the other day and may be interested in the larger screen you have. I'm in Oklahoma City though, any idea on what shipping would cost?

OpFlash

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
Re: Free Items - Official Thread
« Reply #43 on: August 21, 2013, 11:39:06 pm »
Hi there Im sure that the shipping would be quite high since its a beast and fairly heavy.  Also its missing the monitor frame.  I suppose one could be built or the parts can be found but that could be tricky.  Lastly  I cant confirm that it would be in a 100% working condition to throw into your cab.  This monitor could be a Jem and it could also be a bit of a project to make it 100% game ready....

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #44 on: August 22, 2013, 08:34:54 am »
Not a lot of people check the free thread, I'd post a "for free" thread in the BST section as well.  Shipping is going to be VERY expensive and you run the risk of the monitor being damaged.
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

rabidfrog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
  • “Little by little, one travels far”-J.R.R. Tolkien
Re: Free Items - Official Thread
« Reply #45 on: August 22, 2013, 03:26:06 pm »
Thanks to 404 for the Toki tori steam code!
Cheers!

Sent from my Nexus 4 using Tapatalk 2


Raktageno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 50
  • Witty Comment!
Re: Free Items - Official Thread
« Reply #46 on: August 22, 2013, 05:40:01 pm »

Hi there Im sure that the shipping would be quite high since its a beast and fairly heavy.  Also its missing the monitor frame.  I suppose one could be built or the parts can be found but that could be tricky.  Lastly  I cant confirm that it would be in a 100% working condition to throw into your cab.  This monitor could be a Jem and it could also be a bit of a project to make it 100% game ready....

Thanks for the advice! I'll get one around here.

OpFlash

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
Re: Free Items - Official Thread
« Reply #47 on: August 22, 2013, 11:16:02 pm »
sounds good! good luck with your cab  :cheers:

lordnacho

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 509
Re: Free Items - Official Thread
« Reply #48 on: September 20, 2013, 11:10:37 am »
Who wants a pretty crap game?  Up to first pm
Brütal Legend Steam Key

Gone to mes83
« Last Edit: September 20, 2013, 11:21:02 am by lordnacho »

cw

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Game over man game over
    • The Cab
Re: Free Items - Official Thread
« Reply #49 on: October 09, 2013, 05:29:59 pm »
Free Pole Position 2 upright cab.  No monitor or pcbs..  easy driving mame hack!

Austin Texas



gone
« Last Edit: November 20, 2013, 04:30:54 pm by cw »

AlienInferno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 497
    • My Blog - The Feve-cade!
Re: Free Items - Official Thread
« Reply #50 on: October 28, 2013, 07:07:50 pm »
Free Pole Position 2 upright cab.  No monitor or pcbs..  easy driving mame hack!

Austin Texas

Sent you a PM.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2


404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #51 on: December 12, 2013, 12:52:20 pm »
free steam copy of Dark Void Zero.

Be warned the game sucks. It sucks more butt-hole than the only working toilet at a fat camp.

first person that posts a response here gets it.

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9924
  • Comanche, OK -- USA
Re: Free Items - Official Thread
« Reply #52 on: December 12, 2013, 02:38:09 pm »
Why not... I'll take it. Thanks. ;D

vindic8r

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
    • MOTUMAME: A Masters of the Universe Arcade Cabinet
Re: Free Items - Official Thread
« Reply #53 on: February 08, 2014, 04:25:29 pm »
FREE TV!

This silver JVC 27" CRT TV (Model AV-27S33) is from 2002, and is in fantastic condition. If you can come and pick it up, it's yours. No charge. Located in the NW suburbs of Chicago.

This thing is in seriously great shape. If you're adventurous, I'd wager it could be converted for use in a cabinet. It sports RCA, S-Video and Component inputs, including a set of RCA inputs on the front.

Come and get it before I have to throw it away or donate it.
« Last Edit: February 09, 2014, 01:42:36 am by vindic8r »

childsremix

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
Re: Free Items - Official Thread
« Reply #54 on: February 21, 2014, 11:24:41 pm »
Located in Vacaville CA I have a Mortal Kombat 4 cabinet that's been gutted.  May be some wiring in there but theres no coin door, monitor etc.. basically just the wood.  Artwork is still intact.  If you interested send me a PM.

Thenasty

  • Trade Count: (+16)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4153
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Free Items - Official Thread
« Reply #55 on: February 27, 2014, 08:17:28 pm »
If you own a Double Dribble Machine, you could use this.

FREE +S/H Double Dribble Instruction card and some button decals/lables.

Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #56 on: March 04, 2014, 03:07:02 pm »
so i was at work today and someone threw a box at me. a small but very heavy box. It was so heavy that it wobbled my head a bit. Just as i was about to get up and crack a skull or two, I looked at the box and it was labeled 'RAM'. I opened it up and there was tons of ram nicely filed in this box laid with anti-static foam. This box has everything from pc100 sd ram all the way up to some ddr2.

there is simply way too much to even go through and make a serious list. If you happen to have an older rig you are setting up for a mame project and need a bit more ram. let me know. Please, no hoarding.

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5944
  • What Me Worry?
Re: Free Items - Official Thread
« Reply #57 on: March 04, 2014, 04:23:12 pm »
I could use 4 DDR2 ram, 1 g or 512 k if you could mail them to me.  I will pay for the postage any packaging that is needed.

Thanks BobA

Address to calculate shipping

313 84 St. SW
Edmonton, Alberta
Canada 
T6X 1H8

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #58 on: March 04, 2014, 05:51:18 pm »
4200 or 5300?

pm me your full address. I will try to get this out to you before the end of the week. No promises on the timeframe as I'm a slave to my job.  :cry:

roknrol

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #59 on: March 07, 2014, 10:30:01 am »
@ 404

Do you have any 1GB sticks of PC3200 DDR2 in your cache? If so, I could use two!

Would certainly paypal you for the shipping expenses!  ;D

404

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1019
Re: Free Items - Official Thread
« Reply #60 on: March 07, 2014, 08:20:06 pm »
@ 404

Do you have any 1GB sticks of PC3200 DDR2 in your cache? If so, I could use two!

Would certainly paypal you for the shipping expenses!  ;D

unfortunately. no :(

I do have some pc 4200 DDR2. should step down to your speed just fine unless you have a very very picky motherboard. judging by the use of 3200 ddr2, that should be a late 478HT, early Socket 775 unit or late amd64 board. If you want to take a chance on the ram, drop me a pm with your address.
« Last Edit: March 07, 2014, 08:24:13 pm by 404 »

NickG

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 586
  • Dig.
    • My Projects Page
Re: Free Items - Official Thread
« Reply #61 on: March 19, 2014, 02:00:05 am »
Free XM29 presentation monitor (this is the older version with the I/O's on two separate panels on each side of the neck cover) Pickup only,  in Arlington, TX. A few known issues: color convergence is not so perfect (noticeable at XGA resolution, text still readable - not so noticeable at classic game resolutions.)  Ocassionally, picture blinks off, then immediately back on.  Internal speakers were blown and have been removed.  I had milled down some of the top cover to fit in a cab long ago, which I guess one could call cosmetic damage.  Also, No remote for you!

byrneaar

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
Re: Free Items - Official Thread
« Reply #62 on: March 26, 2014, 10:08:52 pm »
so i was at work today and someone threw a box at me. a small but very heavy box. It was so heavy that it wobbled my head a bit. Just as i was about to get up and crack a skull or two, I looked at the box and it was labeled 'RAM'. I opened it up and there was tons of ram nicely filed in this box laid with anti-static foam. This box has everything from pc100 sd ram all the way up to some ddr2.

there is simply way too much to even go through and make a serious list. If you happen to have an older rig you are setting up for a mame project and need a bit more ram. let me know. Please, no hoarding.

I could use some ddr2 ram if there any 4gb modules I am looking to upgrade an older rig.

stan2323

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 257
  • Major USS Enterprise Commanding
    • My home page
Re: Free Items - Official Thread
« Reply #63 on: May 03, 2014, 09:42:45 pm »
Please delete this post the item is gone.
« Last Edit: May 26, 2014, 04:31:38 pm by stan2323 »
Careful what you wish for you may get it!!
There are 10 kind of people in the world those that understand binary and those that do not!!

stan2323

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 257
  • Major USS Enterprise Commanding
    • My home page
Re: Free Items - Official Thread
« Reply #64 on: May 26, 2014, 05:04:57 pm »
I have a Super Pa-Man cabinet that I am getting rid of.  Moving in 3 weeks and will not be taking this with me.  There is no marque, no power supply, and no coin door.  The lock has been drilled, the monitor is in the bottom not mounted.  The monitor has burn in and I am not sure if it works.  The JAMMA harness is there but I am not sure if it works.  The wood is solid and has no water damage.  See pictures.  Pick up or if you make the arrangements and pay the shipper I will help load.

Stan








Careful what you wish for you may get it!!
There are 10 kind of people in the world those that understand binary and those that do not!!

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #65 on: May 26, 2014, 09:39:27 pm »
Wish I was near you (I'm in CT).  I'd be there in a heartbeat!

DeLuSioNaL29
Stop by my Youtube channel and leave a comment:

APFelon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 564
  • Posts: 5922
Re: Free Items - Official Thread
« Reply #66 on: June 08, 2014, 12:42:41 am »
I posted this on Reddit, but maybe I'll have better luck here:

Free to pickup in MN: WG 25k7124 25 inch monitor.

The monitor has zero burn in, but the chassis puts off no HV. I have since replaced the monitor in my MAME cab so I have no need for it. The chassis has been recapped with a kit bought from HAPPs within the last five years or so.

Pickup only; I don't want to ship this monster and I don't want to separate the chassis from the tube.

If you come to pick it up, I'll even let you pick through my arcade parts (joysticks, coin doors, mechs, tokens, etc) and you can take some of that stuff home with you as well if you want.

I live near Monticello, which is half way in between St. Cloud and Minneapolis. PM me if interested.

CalixPapi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • I want to build an arcade, not 1 machine, plenty
Re: Free Items - Official Thread
« Reply #67 on: June 13, 2014, 01:23:52 pm »
Not my post but maybe somebody in the area can snag this. Wish I had the room for it.

http://sacramento.craigslist.org/vgm/4516423298.html

jasonbar

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2080
  • Dr. Inferno
    • The Infernolab
Re: Free Items - Official Thread
« Reply #68 on: June 16, 2014, 09:20:39 pm »
GONE--THANKS!!!

Didn't get any takers who wanted to pay $.

http://forum.arcadecontrols.com/index.php/topic,138836.msg1436943.html#msg1436943

Free. Just pay shipping. Don't want to scrap this. :]

Thanks,
-Jason
« Last Edit: June 23, 2014, 06:19:49 pm by jasonbar »

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #69 on: July 15, 2014, 07:59:07 pm »
Damn shame that someone would just dump this on the side of the street.

http://newyork.craigslist.org/brx/zip/4569561122.html

 artwork looks pretty good.

 :'(
« Last Edit: July 15, 2014, 08:01:08 pm by jmike »

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #70 on: July 15, 2014, 10:58:52 pm »
Lol. I just BOUGHT an empty Nintendo cabinet tonight near there. Wish I had seen this earlier.
Stop by my Youtube channel and leave a comment:

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #71 on: July 16, 2014, 05:00:54 am »
Lol. I just BOUGHT an empty Nintendo cabinet tonight near there. Wish I had seen this earlier.

Guessing you bought the one in Long Island.
Good find DeLusional.

 :cheers:

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #72 on: July 16, 2014, 02:36:34 pm »
Yeah, I popped on it.  He also had a non-working Centipede which I also bought.  I have my hands full with projects now.   :cheers:

D
Stop by my Youtube channel and leave a comment:

nikolas2003

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #73 on: August 05, 2014, 09:07:05 pm »
Hi,
Here's stuff I want to give :

20 x red button
1 x player 1 button
1 x player 2 button
2 x sanwa joystick
1 x spinner
I-Pac card
wire

PM me if interested...Thank's


is no longer available...thanks
« Last Edit: August 09, 2014, 09:47:16 am by nikolas2003 »

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #74 on: August 05, 2014, 09:20:07 pm »
Seriously. I'll take it Pm sent.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #75 on: August 05, 2014, 09:22:42 pm »
Gimme  dat ipac mike :)
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #76 on: August 05, 2014, 09:29:57 pm »
Gimme  dat ipac mike :)

Hopefully I sent the PM first.
You know I would Malenko but it kind of belongs with the set.  ::)

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #77 on: August 05, 2014, 09:41:52 pm »
Lolololol. All good bro
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

nikolas2003

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #78 on: August 06, 2014, 06:35:04 am »
Hi jmike,
I can't reply to personal messages...could you send me your zip code for the shipping cost at my personal email :


I will go to the post office at the end of this week....
Thanks!
Nicolas
« Last Edit: August 09, 2014, 09:43:25 am by nikolas2003 »

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #79 on: August 06, 2014, 07:02:26 am »
Sure thing email sent.

 :applaud:

Thanks.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #80 on: August 06, 2014, 07:44:49 am »
nikolas2003  I think you need 2-5 posts to be able to PM, just for future reference.  Also, kudos for you to pass along items you dont want/need anymore for the cost of shipping.  :cheers:
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

nikolas2003

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #81 on: August 06, 2014, 08:57:10 pm »
malenko, ok thanks for the info  :) I'm now able to send/reply personal messages

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2984
  • And to the death god we say, "Not today!"
Re: Free Items - Official Thread
« Reply #82 on: August 08, 2014, 05:08:47 pm »
Gamecube DK Bongos.  They worked last time they were used about 2 years ago.  Been on the shelf since, my GC died.

Pay shipping and they're yours.


Gone.  Thanks!

« Last Edit: August 08, 2014, 05:50:09 pm by Slippyblade »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16232
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Free Items - Official Thread
« Reply #83 on: August 08, 2014, 05:09:40 pm »
Gamecube DK Bongos.  They worked last time they were used about 2 years ago.  Been on the shelf since, my GC died.

Pay shipping and they're yours.





Where's the other free stuff?  >:D
***Build what you dig, bro. Build what you dig.***

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #84 on: August 14, 2014, 07:31:26 am »
Hi,
Here's stuff I want to give :

20 x red button
1 x player 1 button
1 x player 2 button
2 x sanwa joystick
1 x spinner
I-Pac card
wire

PM me if interested...Thank's


is no longer available...thanks


Just a quick update all parts received.
Thanks again Nicolas you're aces in my book.     :cheers:



« Last Edit: August 14, 2014, 08:17:46 am by jmike »

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2768
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Free Items - Official Thread
« Reply #85 on: August 14, 2014, 08:16:22 am »
Just a quick update all parts received. Thanks again Nicolas your aces in my book.  :cheers:

After you received all of the coolest parts offered in recent memory, I have no problem with telling you the following: "you're"

>:D

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 980
Re: Free Items - Official Thread
« Reply #86 on: August 14, 2014, 08:18:22 am »
Just a quick update all parts received. Thanks again Nicolas your aces in my book.  :cheers:

After you received all of the coolest parts offered in recent memory, I have no problem with telling you the following: "you're"

>:D


Fixed.  Thanks Rick. Still waking up here.

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2768
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Free Items - Official Thread
« Reply #87 on: August 14, 2014, 08:21:29 am »
Fixed.  Thanks Rick. Still waking up here.

Still jealous.

;)

But you're right. Nikolas2003 (and everybody who offers up stuff for free!) are definitely great, and should be applauded.

gonzojoey

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 166
Re: Free Items - Official Thread
« Reply #88 on: August 27, 2014, 03:24:09 pm »
I'm moving out and need to find a new home for my project. She's been good to me, but being the neglectful owner that I am, I never finished her and she's been sitting for a while. Looking for someone who is willing to take good care of her and find her a loving home.
Cabinet is solid, 19in LCD installed, LED WIZ+GP installed and working, all CP buttons wired up and lighted, PC and monitor wired into power supply so only one power cord to power the unit. PC has Mamewah front-end but I never did any of the config on the GPWiz / Joy2Key to get the CP buttons lined up with the proper inputs. It wouldn't take much to get her all working great.. but I really don't have the space in the new place and need to find a new home for her.

 Located in Simpsonville, SC 29681
« Last Edit: August 27, 2014, 03:26:56 pm by gonzojoey »

jasonbar

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2080
  • Dr. Inferno
    • The Infernolab
Re: Free Items - Official Thread
« Reply #89 on: August 27, 2014, 03:25:46 pm »
Very cool...but where is it located? :]

-Jason

I'm moving out and need to find a new home for my project. She's been good to me, but being the neglectful owner that I am, I never finished her and she's been sitting for a while. Looking for someone who is willing to take good care of her and find her a loving home.
Cabinet is solid, 19in LCD installed, LED WIZ+GP installed and working, all CP buttons wired up and lighted, PC and monitor wired into power supply so only one power cord to power the unit. PC has Mamewah front-end but I never did any of the config on the GPWiz / Joy2Key to get the CP buttons lined up with the proper inputs. It wouldn't take much to get her all working great.. but I really don't have the space in the new place and need to find a new home for her.

gonzojoey

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 166
Re: Free Items - Official Thread
« Reply #90 on: August 27, 2014, 03:28:24 pm »
Very cool...but where is it located? :]

-Jason

Oops.. updated post. I'm in South Carolina.. i must have been so heartbroken when posting that I forgot to include the location :)

ImGreenman

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #91 on: August 27, 2014, 03:31:24 pm »
This would look great in my house :) pity I live in Ireland :(

iscariot

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 304
Re: Free Items - Official Thread
« Reply #92 on: September 25, 2014, 09:38:29 am »
PM Sent....

Wilimnot

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #93 on: October 03, 2014, 12:56:15 am »
FREE ARCADE VGA BREAKOUT CABLES.

Just pay $6.00 for s/h to USA only.


I make this cables as I find Monitors being thrown away. I snip the cables and make it usefull.

I now have plenty of VGA cables. Got them from a company that purchased new monitors and used the DVI/HDMI cable instead of VGA.
Each one of this cables makes 2 VGA Breakout.
See pic below.


All that I make are fully tested in my Arcade Monitor Mame Cab (Guaranteed working).


A diagram below to make one yourself.
Pins mark with * you don't use.
If Pin 9 exist on your cable, consider it *.
In order to get composite, you just need to twist 2 wires (13 & 14) and connect to your monitor SYNC.
Use a multimeter continuity to trace what cable is what. Don't go by the colors of the wires.
Connect all GND together.
The RGB should be easy to figure out.



FREE POWER SUPPLY 200watts+ OLD TOGGLE SWITCH TYPE ($10.00 for S/H).
http://forum.arcadecontrols.com/index.php?topic=101280.0

I'm trying to send you a pm about the VGA cable, but can't.  I just recently bough a dedicated MK cabinet and I'm restoring it.  A dream project of mine.  I'm interested in the VGA cable, because I'm using my PC to build my machine. 

JDFan

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2743
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #94 on: October 03, 2014, 01:27:19 am »
FREE ARCADE VGA BREAKOUT CABLES.

Just pay $6.00 for s/h to USA only.


I make this cables as I find Monitors being thrown away. I snip the cables and make it usefull.

I now have plenty of VGA cables. Got them from a company that purchased new monitors and used the DVI/HDMI cable instead of VGA.
Each one of this cables makes 2 VGA Breakout.
See pic below.


All that I make are fully tested in my Arcade Monitor Mame Cab (Guaranteed working).


A diagram below to make one yourself.
Pins mark with * you don't use.
If Pin 9 exist on your cable, consider it *.
In order to get composite, you just need to twist 2 wires (13 & 14) and connect to your monitor SYNC.
Use a multimeter continuity to trace what cable is what. Don't go by the colors of the wires.
Connect all GND together.
The RGB should be easy to figure out.



FREE POWER SUPPLY 200watts+ OLD TOGGLE SWITCH TYPE ($10.00 for S/H).
http://forum.arcadecontrols.com/index.php?topic=101280.0

I'm trying to send you a pm about the VGA cable, but can't.  I just recently bough a dedicated MK cabinet and I'm restoring it.  A dream project of mine.  I'm interested in the VGA cable, because I'm using my PC to build my machine.

New accounts can't PM until IIRC 5 posts so make a few more posts and you should be able to PM him (though the post you quoted is 8 years old he is still on the forum so might respond.)

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11990
  • 說好話 做好事 存好心
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Free Items - Official Thread
« Reply #95 on: October 03, 2014, 07:51:06 am »
thenasty does still make cables, so you've lucked out. JDFan brings up a great point though, check the dates on posts.
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award

Latest project:
http://forum.arcadecontrols.com/index.php/topic,150902.0.html
RedheadKingPinball aka GingerBalls

Latest Restore?
http://forum.arcadecontrols.com/index.php/topic,152600.0.html
Killer Instinct Cab

Thenasty

  • Trade Count: (+16)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4153
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Free Items - Official Thread
« Reply #96 on: October 03, 2014, 08:53:04 am »
Yeap, still offer this for BYOAC members.

Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

1UP

  • Token Junkie
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2081
  • Yes, that is a joystick in my pocket.
    • 1UPArcade
Re: Free Items - Official Thread
« Reply #97 on: November 02, 2014, 10:15:45 pm »
Anyone for a fixer upper?  My original cabinet is sitting on the curb for anyone who wants it.  It is gutted, but there are a few odds and ends inside, some random controls, monitor brackets, marquee glass, and the control panel frame sitting not far away.  If you have a truck and slme friends, go for it before the dump truck gets it.

12600 Hunnewell Ave
Sylmar, CA 91342

1UP

Free resource for building your own rotating control panels!

My other job...

My Halloween Animatronics

Generic Eric

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4517
  • Restore! Don't maim for MAME, build from scratch!
    • forum.arcadecontrols.com/index.php/topic,143226.0.html
Re: Free Items - Official Thread
« Reply #98 on: November 02, 2014, 10:30:57 pm »
The words? Where are they?


menace

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2549
Re: Free Items - Official Thread
« Reply #99 on: November 03, 2014, 07:03:55 am »
+1--back in the day, that cabinet defined the rotating panel and was a large inspiration for my project (which sadly moved on a few years ago...)
its better to not post and be thought a fool, then to whip out your keyboard and remove all doubt...

jdbailey1206

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1943
  • Hello pants.
Re: Free Items - Official Thread
« Reply #100 on: November 03, 2014, 07:46:30 am »
The words? Where are they?



SO DO YOU!  Oh heh.  Sorry.  Reflex.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16232
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Free Items - Official Thread
« Reply #101 on: November 03, 2014, 09:52:15 am »
Anyone for a fixer upper?  My original cabinet is sitting on the curb for anyone who wants it.  It is gutted, but there are a few odds and ends inside, some random controls, monitor brackets, marquee glass, and the control panel frame sitting not far away.  If you have a truck and slme friends, go for it before the dump truck gets it.

12600 Hunnewell Ave
Sylmar, CA 91342

1UP

What a great offer! I'm kind of curious, why is it at this point?  :cheers:
***Build what you dig, bro. Build what you dig.***

Generic Eric

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4517
  • Restore! Don't maim for MAME, build from scratch!
    • forum.arcadecontrols.com/index.php/topic,143226.0.html
Re: Free Items - Official Thread
« Reply #102 on: November 03, 2014, 11:00:16 am »
The words? Where are they?



SO DO YOU!  Oh heh.  Sorry.  Reflex.
Seriously.  This was THE project to watch back in the day.  It was a great time to be alive.

1UP

  • Token Junkie
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2081
  • Yes, that is a joystick in my pocket.
    • 1UPArcade
Re: Free Items - Official Thread
« Reply #103 on: November 03, 2014, 06:58:25 pm »
Anyone for a fixer upper?  My original cabinet is sitting on the curb for anyone who wants it.  It is gutted, but there are a few odds and ends inside, some random controls, monitor brackets, marquee glass, and the control panel frame sitting not far away.  If you have a truck and slme friends, go for it before the dump truck gets it.

12600 Hunnewell Ave
Sylmar, CA 91342

1UP

What a great offer! I'm kind of curious, why is it at this point?  :cheers:

Well, life finally got in the way of continuing this project.  I was recently offered a job at Industrial Light and Magic which ended up being a nightmare of a relocation from Los Angeles to San Francisco.  My wife had to sacrifice so much to make this happen, so I had to sacrifice as well.  This cabinet has been in pieces for several years pending some major upgrades, and since then we have had to move it twice.  It's always been the most difficult item to move.  This time it would have had to go up a narrow set of stairs that turn 180 degrees.  So much technology has changed since it was built, the form factor just didn't make sense any more.  I decided that it was time to rethink and redesign.  I'm already planning its replacement, which explains why I've salvaged all the guts.  Most likely something along the lines of a wall mounted flat screen and a 4 player podium with some interchangeable elements, that can all be dismantled and fit into a hatchback.  It's a sad day for sure but it brings some relief as well.

I really hope someone can salvage it and get some enjoyment from it before it turns to dust.  Was a fun thing to design and build.
« Last Edit: November 03, 2014, 07:03:04 pm by 1UP »

Free resource for building your own rotating control panels!

My other job...

My Halloween Animatronics

DaOld Man

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4430
  • I dont get no respect.
    • Skenny's Outpost
Re: Free Items - Official Thread
« Reply #104 on: November 06, 2014, 07:43:24 pm »
*Gone*

Sorry, I think I made a mistake by not putting this post in here first.
Free card that came out of a 15" elo touchscreen monitor. The screen touch sensors plugged into this card.
Don't know if it works or not, pretty sure it does though.
Free, you just pay postage.
Gonna keep it on here another week then it goes to recycle bin. (trying to get rid of some junk that is starting to making my house look like a hoarder lives here. LOL)
There are some pics in my original post:

http://forum.arcadecontrols.com/index.php/topic,142084.0.html
« Last Edit: November 15, 2014, 09:37:50 pm by DaOld Man »

SteveJ34

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 803
Re: Free Items - Official Thread
« Reply #105 on: November 07, 2014, 03:16:08 am »
Once upon a time many moons ago I had a marquee printed for my cab based on the Lucid design at a local print shop. They had some issues with printing and I ended up with the extra copies seen below.

The one on top has a few very minor micro scratches, one in the A of Arcade but you can't really see it once lit.

The one on the bottom has a minor ink smudge on the left side border likely not seen once mounted.

They are 28" x 10" and I will ship the sheet for free likely by rolling it up and stick in a tube for mailing.

Use them for a project, stick them on a wall, or ?

FREE to anyone that may have a use for them including shipping.


Generic Eric

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4517
  • Restore! Don't maim for MAME, build from scratch!
    • forum.arcadecontrols.com/index.php/topic,143226.0.html
Re: Free Items - Official Thread
« Reply #106 on: November 07, 2014, 09:31:55 am »
Once upon a time many moons ago I had a marquee printed for my cab based on the Lucid design at a local print shop. They had some issues with printing and I ended up with the extra copies seen below.

The one on top has a few very minor micro scratches, one in the A of Arcade but you can't really see it once lit.

The one on the bottom has a minor ink smudge on the left side border likely not seen once mounted.

They are 28" x 10" and I will ship the sheet for free likely by rolling it up and stick in a tube for mailing.

Use them for a project, stick them on a wall, or ?

FREE to anyone that may have a use for them including shipping.


Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

Thenasty

  • Trade Count: (+16)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4153
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: Free Items - Official Thread
« Reply #107 on: November 07, 2014, 02:22:14 pm »
I'll take the other one if that's OK (07604).
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

SteveJ34

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 803
Re: Free Items - Official Thread
« Reply #108 on: November 10, 2014, 06:28:02 am »
Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

These are printed on a material that by design is intended to be illuminated.

I offered these for free including shipping. My gift back to our member community.

Send me your shipping info via PM and I will get this out to you this week.

SteveJ34

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 803
Re: Free Items - Official Thread
« Reply #109 on: November 10, 2014, 06:29:28 am »
I'll take the other one if that's OK (07604).

It's yours and I will cover postage, just send me your shipping address via PM.

SteveJ34

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 803
Re: Free Items - Official Thread
« Reply #110 on: November 13, 2014, 10:42:44 am »
Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

These are printed on a material that by design is intended to be illuminated.

I offered these for free including shipping. My gift back to our member community.

Send me your shipping info via PM and I will get this out to you this week.

I still have (1) of these left.

Free to whoever can put it to use including shipping.


Generic Eric

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4517
  • Restore! Don't maim for MAME, build from scratch!
    • forum.arcadecontrols.com/index.php/topic,143226.0.html
Re: Free Items - Official Thread
« Reply #111 on: November 15, 2014, 07:45:59 pm »
Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

These are printed on a material that by design is intended to be illuminated.

I offered these for free including shipping. My gift back to our member community.

Send me your shipping info via PM and I will get this out to you this week.

I still have (1) of these left.

Free to whoever can put it to use including shipping.
Received today in the mail.  Thanks!

tkropp17

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 97
  • Can't figure out how to change my username
Re: Free Items - Official Thread
« Reply #112 on: January 04, 2015, 06:47:26 pm »
Located outside of Philadelphipa, zip 19462

I really don't think I can ask anything for this, but thought it would be cool for someone else to fix up and use if they wanted a side project.

mike96sc2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 35
Re: Free Items - Official Thread
« Reply #113 on: January 20, 2015, 10:20:56 pm »
Free - 33" Monitor - No picture. Taken out of showcase cabinet. If you're interested and will pay for shipping, it's yours.

Forgot to mention - shipping from 52402
« Last Edit: January 24, 2015, 10:08:02 am by mike96sc2 »

jasonbar

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2080
  • Dr. Inferno
    • The Infernolab
Re: Free Items - Official Thread
« Reply #114 on: January 21, 2015, 02:07:01 am »
Black plastic coin box & its steel bracket. Used but intact.

Hi-res gallery: https://www.dropbox.com/sh/egyusdft0xj881v/AADOrn6ya7dbHeWRajfDCqcua?dl=0

About 10" wide x 6" deep x 8" high.

Shipping box is 14"x10"x7", 3lb, coming from USA 91101.


Thanks,
-Jason

fillup7682

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #115 on: February 11, 2015, 05:59:17 pm »
Have a free Kortek 27 multisync monitor.  I haven't used in 2 years but last time it was plugged in it worked fine.  I need the storage space and don't plan on using it anymore since I have upgraded.  You will have to move it yourself.  It is heavy (prob 70-80lbs).  I live in the Arlington VA area,  near DC.  LOCAL Pick up only. 

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #116 on: February 14, 2015, 03:34:12 pm »
Is this still available?  I'm planning on making a trip to VA in March and I can swing by to pick it up then.  If not, I have a buddy who lives in Woodbridge, VA who can pick it up sooner if need be.  I'll need to check with him first of course.

Thanks in advance and let me know...  It will go to a good home.   :applaud:

DeLuSioNaL29
Stop by my Youtube channel and leave a comment:

ArkhamA

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #117 on: February 21, 2015, 01:43:50 pm »
For fillup7682, if Delusional29 doesn't come through on getting that monitor, let me know I'm right around the corner and can come by anytime. I need it!! I'll get in line behind him. Thanks either way in advance.

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #118 on: February 21, 2015, 05:23:41 pm »
ArkhamA, if you need it - no worries. You can have it by all means!  Just put it to good use!  :-)
Stop by my Youtube channel and leave a comment:

ArkhamA

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #119 on: February 23, 2015, 07:28:18 pm »
Thank you Del!!....I'm apparently not allowed to PM?? So I have to see if fillup responds on here.

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6286
  • 2013 UCA Awardee
Re: Free Items - Official Thread
« Reply #120 on: February 23, 2015, 07:51:55 pm »
I'm apparently not allowed to PM??
Post a few more times and your PM system will automatically enable.   ;D


Scott

NickG

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 586
  • Dig.
    • My Projects Page
Re: Free Items - Official Thread
« Reply #121 on: March 02, 2015, 04:46:43 am »
DFW,TX...Free monitors on craigslist, not mine, just a heads-up
SONY PVM 2950Q, SONY PGM-200R2U, some burn-in from airport usage.

http://dallas.craigslist.org/dal/ele/4891894736.html

GearHead

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 103
  • need more gear...
Re: Free Items - Official Thread
« Reply #122 on: March 05, 2015, 12:13:30 am »
Found this on Craigslist.

Free Tekken 4 in New London CT

http://newlondon.craigslist.org/eld/4917523612.html

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #123 on: March 05, 2015, 12:50:14 am »
Thanks. I'm near there. I will email the guy and swing by.
Stop by my Youtube channel and leave a comment:

pbiancardi

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
Re: Free Items - Official Thread
« Reply #124 on: March 06, 2015, 07:36:07 am »
Free Arcade Monitor, I am sick of trying to setup and configure and am going to switch to an HD display, need gone tomorrow (Saturday) so I can finish my project -

http://chicago.craigslist.org/nwi/sop/4919523272.html

Monitor works fine, no issues.


« Last Edit: March 06, 2015, 01:33:44 pm by pbiancardi »

sc23

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #125 on: March 25, 2015, 11:56:10 am »
Converted a SEGA Super Megalo 2 to MAME as it had a dead rear projection screen I couldn't fix. Still have all the original parts from machine like game select board, power supply, audio amp, and several boards I don't even know what they do. Plus I have the rear pro screen in storage. Anyone looking for parts from one of these machines, hit me up and I will send them, would love it if some of my parts could help in someones restoration.

j.fitzenr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Don't Afraid to be Great
Re: Free Items - Official Thread
« Reply #126 on: April 13, 2015, 01:46:13 pm »
No clue if anybody wants this thing it's old and junky but, just stumbled onto it a few weeks ago in the basement and can't come up with a reasonable use for it, but I hate the idea of wasting stuff if anybody can use it.

Old school Dell Inspiron 4100.  P3! 1.2ghz Box 256 ram I think, 14.1 4:3! screen, valid XP Key on it but currently running Puppy Linux.  Most interesting reason I figured somebody might want it is it's about the only 4:3 laptop I've seen since the Clinton years.  Everything seems to be functional, adapter works, etc, has a removable CD drive, think I may have the floppy drive around somewhere too but not positive.  Also has a cardbus WIFI card that currently isn't configured. 

It's ancient and not the nicest piece of work, but if anybody here wants it for parts, the screen, or some weird project I'll shoot it out to ya for shipping.  Figured I'd offer it here before I recycle and/or office-space it.

EDIT: Couldn't hunt down the 3.5" drive, but I'll keep looking.  Battery holds a charge but not for too long...  looks like shipping USPS most of the US is gonna be around that $15 mark.  Thing is probably going to get gutted or recycled soon, so if there's any random interest speak now! 
« Last Edit: April 16, 2015, 08:36:44 pm by j.fitzenr »

Mr_Numbers

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
  • Long time lurker, first time builder
Re: Free Items - Official Thread
« Reply #127 on: April 13, 2015, 04:37:02 pm »
No clue if anybody wants this thing, just stumbled onto it a few weeks ago in the basement and can't come up with a reasonable use for it. 

Old school Dell Inspiron 4100.  P3! 1.2ghz Box 256 ram I think, 14.1 4:3! screen, valid XP Key on it but currently running Puppy Linux.  Most interesting reason I figured somebody might want it is it's about the only 4:3 laptop I've seen since the Clinton years.  Everything seems to be functional, adapter works, etc, has a removable CD drive, think I may have the floppy drive around somewhere too but not positive.  Also has a cardbus WIFI card that currently isn't configured. 

It's ancient and not the nicest piece of work, but if anybody here wants it for parts, the screen, or some weird project I'll shoot it out to ya for shipping.  Figured I'd offer it here before I recycle and/or office-space it.

How much would shipping be to 32907?

Mr_Numbers

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
  • Long time lurker, first time builder
Re: Free Items - Official Thread
« Reply #128 on: April 15, 2015, 09:13:19 pm »
I'm not going to be able to get the old school laptop, but shipping quoted was very reasonable ($15).  Just an FYI for any other interested parties.

j.fitzenr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Don't Afraid to be Great
Re: Free Items - Official Thread
« Reply #129 on: April 24, 2015, 05:37:25 pm »
hegone!
« Last Edit: November 21, 2015, 01:48:11 am by j.fitzenr »

AtomSmasher

  • I'm happy to fly below Saint's radar
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3884
  • I'd rather be rich than stupid.
    • Atomic-Train
Re: Free Items - Official Thread
« Reply #130 on: April 26, 2015, 01:53:05 pm »
Free SlikStik Cabinet in Irvine, CA
Got it free on Craigslist years ago, but never got around to doing anything with it.  Includes coin mech and marquee light.  The laminate on one side was starting to peel off, but can easily be glued back on.  Currently wrapped in plastic from the last time I moved.

http://imgur.com/a/gRvzG

reptileink

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 514
  • An 8 bit hero
Re: Free Items - Official Thread
« Reply #131 on: May 12, 2015, 03:26:51 pm »
Free Virtua Fighter cabinet in Windsor CT
http://hartford.craigslist.org/zip/5021557226.html

~Building Arcade Cabinets are like raising children, you always mess up your first~

kangarolf

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #132 on: June 13, 2015, 02:39:58 pm »
I have to give away

1 - Sega 29 inch medium res Naomi monitor which is working but has some scratching to the front
2 - Neck board for a naomi medium res 29 inch monitor unknown state.
3 - adjustable foot for a naomi cab that is ok but needs sanding and painting.

All available to whomever wants to come and collect from South Manchester, UK

PetitMorte

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 332
  • . . . - - - . . .
Free Roadblaster Innards - Come and get 'em
« Reply #133 on: July 26, 2015, 12:16:33 pm »
Hi Guys,

I'm in Canal Winchester, on the southeast side of Columbus, OH.

I have the essential innards of a RoadBlaster machine for whoever wants to stop by and pick em up.
Everything was working the last time I plugged it all together, but it has been sitting in my garage for 6+ years untouched since then.

I have the full Atari System7 motherboard with the RoadBlasters daughterboard (2'x3' on a steel backing plate), a 19" LR40363 monitor, the sound board (recapped), and the power supply.

Come and get it before my wife recycles it!

Thanks.
Bitten by the cabinet bug... obsessing ever since.

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #134 on: July 26, 2015, 06:25:59 pm »
Wish you were closer. I'd love to have that monitor.
Stop by my Youtube channel and leave a comment:

cw

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Game over man game over
    • The Cab
Re: Free Items - Official Thread
« Reply #135 on: September 29, 2015, 06:01:11 pm »
austin  tx


pinball head.  No glass,  display driver pcb and 2 displays in place but they dont look good.
all wiring is in place and looks to be solid.


its from a firepower

reptileink

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 514
  • An 8 bit hero
Re: Free Items - Official Thread
« Reply #136 on: November 03, 2015, 02:57:08 pm »
This has been up for a bit, but might still be avail:

Need for Speed seat and base CT Craigslist
https://hartford.craigslist.org/zip/5286366016.html

~Building Arcade Cabinets are like raising children, you always mess up your first~

PCTech714

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
Wells-Gardner D9200 (GONE! 11/27/15)
« Reply #137 on: November 19, 2015, 05:43:40 pm »
Hey, everybody!

I've found myself in a terrible position for an arcade cabinet owner/builder. My BABY that I started building from scratch in 2006, is heading for the junk heap.  Control panel, computer hardware, speakers, bezel, some of the physical hardware, etc. is all gone, except for the cab itself which is rotting.  :(

The only piece that remains in good condition is the Wells-Gardner D9200 monitor.  It's in great condition, although I noticed before taking it out of the cabinet that the screen is a little brighter than normal; probably just needs a simple adjustment.

I'm in the process of moving so shipping is out of the question (I'm just too busy!).

If anybody lives near southwest PA, please get in touch and get this off my hands.  I'm not even sure how to dispose of it properly if nobody takes it, to be honest.

My last day at my current residence is November 28, 2015, so if you're interested let me know ASAP and we can make arrangements.  If you're looking for a more specific location, I'm in the South Hills of Pittsburgh near Bethel Park/South Park (zip 15129).

Thanks,


Joe


This item has been taken. Thank you, DeLuSioNal29 for your help!
« Last Edit: November 27, 2015, 02:01:22 pm by PCTech714 »

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #138 on: November 19, 2015, 09:51:43 pm »
I know someone who will grab it.  PM me your contact info.

DeLuSioNaL29
Stop by my Youtube channel and leave a comment:

lordnacho

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 509
Re: Free Items - Official Thread
« Reply #139 on: December 04, 2015, 11:07:31 am »
Free steam codes:
Overlord
Operation Flashpoint: Dragon Rising
Operation Flashpoint: Red River

Heard of them, but no idea if any good.  I won't ever play them. 

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2984
  • And to the death god we say, "Not today!"
Re: Free Items - Official Thread
« Reply #140 on: December 04, 2015, 02:13:36 pm »
Overlord is amazing, I own it on two different platforms.

freestuffonme

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #141 on: December 04, 2015, 03:41:43 pm »
I have two Sony Wega Trinitron KV-XBR800s - A 300lbs 40inch and a 200lbs 36 inch. They're free if you can carry them out of my house.  :applaud:  It requires 3 people and a truck/cargo van to move them. I'm located in Bensonhurst Brooklyn. PM if you're interested.

DemonWarp!

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Where's the beer?
    • demonwarp.com
Mitsubishi XC-3310C CRT
« Reply #142 on: December 04, 2015, 05:46:48 pm »
Monitor is gone. Please delete.
« Last Edit: July 15, 2016, 01:09:49 am by DemonWarp! »

Bumblebounces

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
  • I ever tell ya 'bout Bumbles? Bumbles...BOUNCE!
    • Starbase 74
FREE Arcade cab for MAME
« Reply #143 on: December 20, 2015, 09:53:39 pm »
Sacramento/Elk Grove, California

Posted to Craigslist.  For more details, click here: 

http://sacramento.craigslist.org/zip/5369075399.html


Gatsu123

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #144 on: January 08, 2016, 08:55:40 pm »
Converted a SEGA Super Megalo 2 to MAME as it had a dead rear projection screen I couldn't fix. Still have all the original parts from machine like game select board, power supply, audio amp, and several boards I don't even know what they do. Plus I have the rear pro screen in storage. Anyone looking for parts from one of these machines, hit me up and I will send them, would love it if some of my parts could help in someones restoration.

I am in the process of restoring a Super Megalo 2 and would be interested in any extra parts you have if they are still available.
« Last Edit: January 08, 2016, 09:09:15 pm by Gatsu123 »

Sinner

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 615
  • Half the lies they tell about me, aren't true...
    • Geek My Gadget
Re: Free Items - Official Thread
« Reply #145 on: February 07, 2016, 06:09:14 pm »
I have number of Gameroom magazines from 2010 and before.
If anyone wants them and are in the GTA, they're all yours....
Thanks,

Matt

freakqnc

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #146 on: May 03, 2016, 07:48:49 pm »
Brooklyn (Dumbo Area).
Spectrum coin operated vintage dart machine (for parts of repair)

Free with pickup!
Contact me soon or will have to sent to recycling :(

Thanks
 


stevejt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 350
  • stevejt.com
    • My site
LONG ISLAND NY (all gone)
« Reply #147 on: July 17, 2016, 11:55:18 am »
Hey all.  Been out of the hobby the last few years, and cleaning out basement.  I figured I post here before craigslist.  Some free stuff if you are local, not worth a long drive.  2 boxes of misc stuff  some fluorescent fixtures, some extra bulbs.  2 coin doors, 1 is patched on front.  25' monitor, 2 boards idk what they are.  and a 10 spot cabinet, game never worked i got cab for free.  if any one is interested let me know at stevejt@hotmail and i will take pics

thanks
 
All free parts and cabs are gone 

THANKS ALL

Steve
« Last Edit: July 24, 2016, 05:43:49 pm by stevejt »

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #148 on: July 17, 2016, 10:03:50 pm »
Hey Steve. I'm heading to Long Island on Saturday 7/23. I would love the items. What part of the island are you on?

Edit. Just realized I never hit Send.

DeL
Stop by my Youtube channel and leave a comment:

Madman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 98
Re: Free Items - Official Thread
« Reply #149 on: July 28, 2016, 01:08:19 pm »
Guys,
I have the guts of a Qbert machine sitting in my garage that I really don't want to throw away.
When it was pulled it worked minus the display (no power). The display is there as well and should be an easy fix... this was stuffed into a diff box so not sure if harness's and such are original.
what I have:
Mainboard
power supply
display
misc wires screws / harness
This was given to me and I really dont have time for it
its located in southeast michigan.
Still have this as of 9/11/16 Everything will be put to trash in 3 days :(
« Last Edit: September 11, 2016, 01:12:05 pm by Madman »

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+44)
  • Full Member
  • *****
  • Online Online
  • Posts: 9965
  • boom
    • Arcade Madness
Re: Free Items - Official Thread
« Reply #150 on: July 28, 2016, 01:24:24 pm »
Could you ship?  I would gladly pay for shipping (minus the monitor). 

pbj

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6161
  • Obey.
    • The Chris Burke Band
Re: Free Items - Official Thread
« Reply #151 on: September 06, 2016, 03:11:43 pm »
About ready to toss a couple of non-working Megatouch cabinets.  SW Houston.  No shipping, no delivery.

These have been trashed.

:cheers:




« Last Edit: September 07, 2016, 09:42:16 am by pbj »

mohawk640

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
Re: Free Items - Official Thread
« Reply #152 on: September 06, 2016, 03:23:34 pm »
Looking for any thing free in Chicago

Sent from my 5054N using Tapatalk


BrentRadio

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 415
  • Stop by for a game and a beer!
    • Jack Daniel's Barcade!
5 19" TV's FREE In Las Vegas
« Reply #153 on: October 28, 2016, 03:30:46 pm »
I have 5 19" tv's of different makes and models.

These are left over from my haunted house from last year and I don't need them anymore.

Free to anyone who want's them. I have no idea what tubes they have.

PM me if you want them. Please take them all if you want them.

Thanks,

Brent

roknrol

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #154 on: January 23, 2017, 12:52:31 pm »
I have a Viewsonic 15" LCD in need of a home. Working, includes transformer and stand (if wanted). Was going to use it for a project, but went with a 17" instead. Good shape, no scratches.

Pickup in 64105. Kansas City, MO

KPez

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #155 on: February 06, 2017, 12:42:05 pm »
A lot of cool stuffs here!

nukie

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #156 on: February 10, 2017, 10:23:18 am »
Not sure if anyone is interested but I have a 32" Magnavox CRT Tv up for grabs.  Has two composite in and one composite out.  One of the composites is shared with an S-Video.  No remote at the moment, but if I find it I'd gladly pass it along.

Located in Southern Twin Cities area of MN (Burnsvile/Savage)

cw

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 746
  • Game over man game over
    • The Cab
Re: Free Items - Official Thread
« Reply #157 on: February 16, 2017, 04:49:21 pm »
spy hunter cab in great shape.... artworkin good shape  no cp or coin door...this is a shell...



austin tx



its gone......
« Last Edit: February 23, 2017, 05:30:04 pm by cw »

JoeStrout

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
Free 32" CRT in Tucson, AZ
« Reply #158 on: February 28, 2017, 07:07:04 pm »
EDIT: This TV has been taken.
« Last Edit: March 01, 2017, 04:21:39 pm by JoeStrout »

nipsmg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1186
  • ROONEY!! ERRGH!!
    • Arcadia
Free Sony KV-36XBR400 36-inch HD-ready WEGA TV in CT
« Reply #159 on: March 01, 2017, 10:50:49 am »
I recently acquired a Sony KV-36XBR400 HD Ready CRT TV that was going to decase and put into a showcase cabinet, but the project never got off the ground.  TV is in great condition.  Located in Cheshire, CT.  Totally free.  YOU MUST LIFT from the ground into truck/SUV.  Please bring one (or more) people to help you lift, it weighs something like 240lbs. It is currently sitting on a dolly in a garage.


Fursphere

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
Re: Free Items - Official Thread
« Reply #160 on: March 11, 2017, 12:48:38 pm »
Rancho Cordova, CA

Spyhunter control panel
Spyhunter gas pedal

both assemblies are complete, just a little rough. Wiring harness connectors are still in place.

Free!  Come get them out of my garage!   PM me.

JonathanT

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
Re: Free Items - Official Thread
« Reply #161 on: March 18, 2017, 07:38:06 am »
Free partially built cab with a Samsung lcd monitor installed.  I started this project a while back, but simply don't have the time.  It's made of MDF, so is quite heavy.  few pics below.  If you are interested, drop me an email on jonathanrtaylor at aol dot com (I don't logon here very often, so email is the best way to go):






large gif hosting

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+31)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3033
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: Free Items - Official Thread
« Reply #162 on: April 22, 2017, 04:32:27 pm »
Edit:  TAKEN!  Nice meeting you asantora!

Mostly empty Space Duel Cabinet free if you pick it up in NJ - 07920. I can't deliver.

It's physically in a bit rough shape but the artwork is pretty good.  I started some Bondo work and never got time to finish it.  Marquee NOT included, I am keeping it to make a lightbox later.  Everything else you see is included.  There are a few boards in there, I have no idea what they are, if they work, or if they are complete.  The internal support wood seems to have been tinkered with and is probably not in its original condition.  The original black cardboard bezel is in there also but is very beat up, but you could use it as a template to make a new one.  Coin door with mechs included, looks easily restorable.

The control panel is metal and was reworked for some other game. 

As is, no returns - I am moving and need it to stay gone :).
« Last Edit: April 23, 2017, 12:40:23 pm by Santoro »

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+31)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3033
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: Free Items - Official Thread
« Reply #163 on: April 22, 2017, 04:33:04 pm »
more

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+31)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3033
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: Free Items - Official Thread
« Reply #164 on: April 22, 2017, 04:33:40 pm »
Last Pics

asantora

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • I want to build my own arcade controls!
Re: Free Items - Official Thread
« Reply #165 on: April 22, 2017, 06:14:48 pm »
Last Pics
Santoro, I live a few miles from you. Would love to pick this up if it's still available.


Sent from my iPhone using Tapatalk

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+31)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3033
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: Free Items - Official Thread
« Reply #166 on: April 22, 2017, 07:09:13 pm »
Last Pics
Santoro, I live a few miles from you. Would love to pick this up if it's still available.


Sent from my iPhone using Tapatalk

PM Sent....

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #167 on: April 23, 2017, 01:53:41 am »
Where are you moving to out of curiosity?  I'm not far from NJ (tristate).  Just curious, always looking for nearby BYOACers.
Stop by my Youtube channel and leave a comment:

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+31)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3033
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: Free Items - Official Thread
« Reply #168 on: April 23, 2017, 03:33:39 pm »
Moving a few towns south from here to Branchburg NJ.

pbj

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6161
  • Obey.
    • The Chris Burke Band
Re: Free Items - Official Thread
« Reply #169 on: May 15, 2017, 11:46:16 am »
Located in SW Houston.





Dartboard, boards, wiring harness, monitors, out of an Arachnid Super Six machine.  Worked fine, cabinet disintegrated in the Houston humidity.  I need to make some space and clear this out.

12 pack of Shiner would be appreciated, but if you show up and haul it off you can have it free.


« Last Edit: May 15, 2017, 11:51:53 am by pbj »

PileDriver

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • I want to built my own arcade!
Re: Free Items - Official Thread
« Reply #170 on: May 15, 2017, 04:01:04 pm »
Anyone in the akron, ohio area interested in some free Real arcade PCBs.
Total of 7
SAGA Out run
Super Champion Baseball
Main Event
and 4 unidentified
All were working when pulled .
Next step is the trash. Must go this week!
Thanks!
 

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #171 on: May 15, 2017, 04:08:28 pm »
Can I grab the Sega Outrun?  PM sent.
Stop by my Youtube channel and leave a comment:

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2035
  • Posts: 48,764
Re: Free Items - Official Thread
« Reply #172 on: May 15, 2017, 04:11:52 pm »
I'd gladly pay for shipping on the unidentified ones if your willing to ship them.
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

PileDriver

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • I want to built my own arcade!
Re: Free Items - Official Thread
« Reply #173 on: May 15, 2017, 04:35:48 pm »
Outrun is er... Out running.. LOL

I'd gladly pay for shipping on the unidentified ones if your willing to ship them.
IG, If there are no local takers, There yours.

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2035
  • Posts: 48,764
Re: Free Items - Official Thread
« Reply #174 on: May 15, 2017, 04:39:06 pm »
Cool. Let me know.
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

PileDriver

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • I want to built my own arcade!
Re: Free Items - Official Thread
« Reply #175 on: May 15, 2017, 08:16:16 pm »
Cool. Let me know.
No problem.. I think you will get them.
I just looked up my reg date 2005  Damn I'm old
:) Is saint still around? and did he ever finish the " project"   
I'll need to get up to date..


IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2035
  • Posts: 48,764
Re: Free Items - Official Thread
« Reply #176 on: May 15, 2017, 08:17:45 pm »
I dunno. I ain't been on here in forever either.
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #177 on: May 15, 2017, 09:52:16 pm »
Yep, Saint is still around.  :-)

The board has been pretty quiet as of late though.  Only a few of us old timers still here.   :applaud:

Thank again for the board Chuck!

Jason
DeL29
Stop by my Youtube channel and leave a comment:

pbj

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6161
  • Obey.
    • The Chris Burke Band
Re: Free Items - Official Thread
« Reply #178 on: May 15, 2017, 09:58:34 pm »
PlZ god someone take my dartboard trash

lwizardl

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Getting back into the hobby
    • Wizard's Arcade
Re: Free Items - Official Thread
« Reply #179 on: May 21, 2017, 04:31:33 pm »
Anyone in the akron, ohio area interested in some free Real arcade PCBs.
Total of 7
SAGA Out run
Super Champion Baseball
Main Event
and 4 unidentified
All were working when pulled .
Next step is the trash. Must go this week!
Thanks!

if any of these are still available and if your willing to ship them I am interested shipping would be to battle creek, michigan 49015

PileDriver

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • I want to built my own arcade!
Re: Free Items - Official Thread
« Reply #180 on: June 01, 2017, 07:43:24 pm »
Sorry Guys, I had notification turned off for this board.(don't know why) Fixed now.
Outrun shipped today, PM to DeLuSioNal29 will be sent shortly.
Identified all but 1 PCB
IG-88 has 1st pick
Boards are as follows:
Main Event 4 player
Super Champion Baseball
Special Criminal Investigation
Mr D's Castle
Sega Choplifter
Lost Tomb by Stern
1 still unidentified clone PCB
 

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #181 on: June 01, 2017, 08:58:51 pm »
Wish I had known it was a Mr. Do's castle. I would have taken that too to save on shipping. :-/
I'm a big fan of Mr. Do! And own both Universal and Taito PCBs.
It would be a cool project to have a 2 in 1  Mr. Do! And Mr. Do's castle cabinet.

DeL
Stop by my Youtube channel and leave a comment:

PileDriver

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • I want to built my own arcade!
Re: Free Items - Official Thread
« Reply #182 on: June 01, 2017, 09:15:48 pm »
Sorry I've had this stuff for a Looooong time.. I just spent the time (hours) to ID them

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2035
  • Posts: 48,764
Re: Free Items - Official Thread
« Reply #183 on: June 01, 2017, 10:55:15 pm »
Sweet! I'd take the Mr. Do! Castle (sorry Del, I got a Mr. Do also and had same idea) Lost Tomb, Sega Choplifter, Special Criminal Investigation, and the unidentified pcb. Do I need to PM you my address?
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4510
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Free Items - Official Thread
« Reply #184 on: June 04, 2017, 09:54:32 am »
Hi all, PileDriver asked me to let everyone know that all items have been taken. (He's having trouble accessing BYOAC and we are working on it.)

I grabbed the Outrun Boardset. The rest he gave away locally.

DeL
Stop by my Youtube channel and leave a comment:

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2035
  • Posts: 48,764
Re: Free Items - Official Thread
« Reply #185 on: June 04, 2017, 10:16:22 am »
Hey Del, can I PM you my email addy to pass onto him?
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2035
  • Posts: 48,764
Re: Free Items - Official Thread
« Reply #186 on: June 04, 2017, 10:17:58 am »
Oh, nevermind. Didn't see he got rid of them locally. :(
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2984
  • And to the death god we say, "Not today!"
Re: Free Items - Official Thread
« Reply #187 on: June 09, 2017, 11:10:47 am »
Got a code for the game Rebel Galaxy from GoG.  I already own it, so it's up for grabs.

HUR3875F3DBA42C9TG

Sign into your GoG account and use the link:

https://www.gog.com/redeem



pbj

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6161
  • Obey.
    • The Chris Burke Band
Re: Free Items - Official Thread
« Reply #188 on: June 21, 2017, 02:40:26 pm »
I don't play Overwatch but got some loot crate code through Amazon...

4PMM-TQ8S-5R4J3-D96B-LH3B


 :cheers:

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31