Free Items - Official Thread

[SirPeale]

Occasionally, members will have items for which they no longer have a need.  One of the nice things you can do is give the item away to another member.  

Some basic rules:

1) This thread will be used *only* for posting of free items.  Discussion will not be allowed.  PM the person offering the item.  After the item is claimed, delete the message offering the item.  This way the thread won't be cluttered.

2) Asking for money for items in this thread is not allowed, other than the cost of shipping.

3) Trades aren't allowed either.  Giveaways *only*.  Trades belong in the rest of the forum.

4) Local pickups are excellent, but if an item must be shipped, the person offering the item must either ask a *reasonable* amount for shipping (eg - don't ask $10.00 to ship a single button).  And, of course, offering to pick up the shipping yourself is a very generous gesture.

[Thenasty]

FREE ARCADE VGA BREAKOUT CABLES.

Just pay $6.00 for s/h to USA only.


I make this cables as I find Monitors being thrown away. I snip the cables and make it usefull.

I now have plenty of VGA cables. Got them from a company that purchased new monitors and used the DVI/HDMI cable instead of VGA.
Each one of this cables makes 2 VGA Breakout.
See pic below.


All that I make are fully tested in my Arcade Monitor Mame Cab (Guaranteed working).


A diagram below to make one yourself.
Pins mark with * you don't use.
If Pin 9 exist on your cable, consider it *.
In order to get composite, you just need to twist 2 wires (13 & 14) and connect to your monitor SYNC.
Use a multimeter continuity to trace what cable is what. Don't go by the colors of the wires.
Connect all GND together.
The RGB should be easy to figure out.



FREE POWER SUPPLY 200watts+ OLD TOGGLE SWITCH TYPE ($10.00 for S/H).
http://forum.arcadecontrols.com/index.php?topic=101280.0

[eastbayarb]

Please help, as I need to move a TV and arcade machine to my new place after having to move unexpectedly. The drive is only 5 minutes away from my old place to my new place, and in return, I will give you a Showcase arcade cabinet. Here is a larger picture of what is included:

http://img687.imageshack.us/img687/8095/showcasecab.jpg

The cabinet I am offering was a project MAME cabinet that I couldn't finish, and my old landlord needs it out of my old garage. The monitor is not attached, but is included.

Please call Antonio ASAP 415-572-3713 (please no texting or emails) - I have NO TIME for flakes, so unless you can help me, please don't call. You will need a large van or truck to transport this. I am in the east bay area in El Sobrante off of highway 80 going out towards Vallejo.

[jasonbar]

Want to get rid of:

Instruction booklet manual for Radar Mission for Game Boy Gameboy.

Slight crease from top to bottom near right side.

$1 shipped in a simple USPS envelope w/ a plain old stamp.

Thanks,
-Jason

[SirPeale]

Nonworking Hantarex 900/e.    Plus two chassis, of which I think one works.  IIRC it's missing transistors.  Pickup only in 05301.

[Nephasth]

Operation Wolf -- Cheyenne, WY -- Pickup Only

When I got this the game would not come on. After some light troubleshooting, I found the power supply to be defective. I swapped it out with a known good power supply and the game came on. My good power supply will not be included (my only spare). Monitor has burn in. Also, the monitor will not focus (hard to read text and graphics are blurry), possible bad flyback. Cabinet has a lot of water damage. Game coins up and you can start the first stage. No sound. No gun recoil. Marquee does not light up. When you pull the trigger the screen flashes indicating a shot has been fired and ammo is depleted. Hits will not register though, I believe this is because of the monitor focus issue, I may be wrong though. No back door and missing the "anti-glare" glass that goes between the monitor and mirror. Thought I would offer this up for free before I part out what I am able to (which isn't much) and/or trash it. Not expecting to see any interest in this, but I can send pics on request.

[mrtuesday42]

FREE to a good home. ORLANDO, FL.
full size arcade cabinet. peeling and wood exterior, street fighter 2 jamma inside. monitor, board, psu, all work and game works. no controls though. i have a some random parts from my last build i will include as well. if no one is interested soon i will through this sucker on craigslist but i would like to give you guys first dibs.

email: mrtuesday42 AT aim.com

[windmill]

You can read the sordid story as to how I got an extra chassis and why it is slightly defective in this thread. Thanks to the good advice from the people here on this forum, plus a new voltage regulator transistor, I got my monitor working.

So, if anyone wants this chassis (Wei-Ya 825), it's free to a good home. Again, this chassis is slightly damaged due to being powered up without an isolation transformer. Replacing the voltage regulator transistor should fix it. All I ask is that you pay the shipping cost. I'm guessing it will be in the $10-$13 range for the continental US. First person to shoot me a message with an address is today's lucky winner. Paypal preferred, but a check is fine (If it's good enough for Bob Roberts, it's good enough for me!)

[J_K_M_A_N]

Free: NEC 3PG 27" Monitor. I was using it as a TV in the bedroom. It has BNC (comes with BNC to RCA adaptor) and S-video inputs as well as RCA audio inputs. It also has a 15 pin VGA connection (with cord included) and (I think) 5 color BNC connections. Back in the day I had it hooked up and it CAN run 1024x768 with the correct refresh rate even though the book says 800x600 is max.

Must pick up in Burnsville, MN. South of Minneapolis and Bloomington (south of the river).

J_K_M_A_N

[Encryptor]

Free - Old radio cabinet for possible jukebox project. It's in rough shape and completely empty.

Local pickup only approx 20 miles SW of Albany, NY.

If you want to see a restored radio of the same model look here.

http://www.welcomebackradio.com/alan29K.htm

[BobA]

Free Sound Blaster Live card.  Has cables and was working when pulled.  Give me your postal or zip code and I will get shipping cost for you.  Good for sound if you are setting up a W98 or XP MAME install.

Edit: Sill Available

[Gray_Area]

gone: IBM keyboard

[SirPeale]

Deleted any post older than a year (there were posts much older than that) as well as any posts that stated that the item was claimed. 

Also, please do not discuss items in this thread.  Take it to PM.  Thank you.

[jimmy2x2x]

4 free cabs:

Fresno, CA

http://www.reddit.com/r/cade/comments/qcmgf/selling_some_cabinets/

NOT MY AD, JUST PASSING IT ALONG

[JaXxX]

I have a  street fighter cabby I'm looking to unload. Located in Baltimore, MD. Cabinet was converted for MAME use and has 360 controllers installed in the control panel already. Free to good home. It currently has a 24" Samsung LCD in it I will include for $100 if someone wants that too, but the cabinet by itself is free. I just don't have the space for it anymore so I'm converting to a smaller setup. If someone wants it with the LCD would only require a PC to be ready to roll.

[Rando]

Child's Harvard multi-gaming table:

Pool table, table hocky, board game table, Mini Ping pong, Foosball top.  Great for kids around 5-8, the two games that got the most usage at my house was as the Pool (with tiny poolballs) and Foosball.  Also shuffle board things and soft horse shoes included, believe I have all pieces/parts.  Only damage to table is one of the hockey goals needs to be screwed back in.

Table is in good shape, kids outgrew and I got a bigger pool table (6') and Air Hockey (7').  Pic/dimensions available, but very similar to pic below, though that one doesn't seem to have pool.  Currently constructed, legs can be removed for transport if necessary.  I don't have time to ship anywhere.

Don't need to sell, local pickup only, located in Basking Ridge, NJ, let me know if any takers.  Otherwise I'll place on curb this weekend and put the over/under on 90 minutes on how long it will stay out there.

[stevodevo]

This was my original gaming PC that I converted to a MAME cabinet... I've recently rotated the wife's old Dell into use as the MAME PC so this one is taking up space.

From memory, it's an AMD 1800+ XP (overclocked to 2100+) on an Epox EP-8K7A mobo with either 1 or 2 Gb of ram.  It's already been capped to auto turn-on when power is supplied but this could easily be reversed.  It includes a CD-Rom drive but no HDDs.

This ran all my MAME games just fine.  It struggled on some 3D games such as those in the ZiNC emulator but would be great as a MAME-only PC.

Location: Paducah, Kentucky if you want to pick it up free.  Otherwise, email or PM your zip and I'll get a shipping quote.

Thanks!

EDIT: GAH! Ok before I get too many more requests, let me reiterate that this is barebones... I forgot that I already scavenged the PSU and the GPU for my current MAME PC.  I may have a PSU I can throw in but let me know if you want that - it'll def. add to the shipping cost.  So essentially what you're getting is the case, a CD-Rom drive, the Epox Mobo, 1 Gb ram (confirmed) and the AMD 1800+ XP (OC'd)...

[yotsuya]

Free: Mad Dog McCree CD-Rom

I have a Mad Dog McCree CD-Rom. It's the DOS version. Buyer just pays $2 for shipping and handling.

[stevodevo]

This was from my outlaws old HP.  I'm talking OLD.  It would be great for a retro cab that wasn't intended to run newer games.  From what I understand it's a 450 Mhz machine (yes, Mhz!) but can be overclocked via dipswitches to a whopping 550 Mhz!  It has 64 mb of ram but combined with the above post for free ram you'd be golden!

Item location is Paducah, KY otherwise PM with your zip and I'll shoot you a shipping quote.

Cheers
Steve

[Minwah]

I have a working Silicon Graphics 21" CRT PC monitor if anyone wants it. Re-badged Sony Trinitron, very good (and very large). Collection only from Oxfordshire, UK.

[Hoopz]

Free Crypt Killer CP and pedestal.  Dynamo Showcase style.  No controls included.  Pick up only in Indy.  No free shipping.  CP and pedestal in average (or better) condition. 

[cw]

Space Duel cab      this is a project cab with no pcb or monitor. Artwork is in good shape and the cab has some minor swelling on the bottom.

Austin Tx

78758
gone

[cw]

Stun Runner. complete, not working. 

[nemesismachine]

(Mortal Kombat II cabinet)

Power supply, power cord/transformer, marquee light, wiring harness (minus ground wire)

Just pay shipping from 21157

[jasonbar]

Free goodies that I've removed from my MAME cabinet. Well, free, but I wouldn't turn down a buck or two to go towards my shipping costs...

!!!GONE!!!1: 21 feet of 3/4"-wide red T-molding from gamemolding.com. I bought extra in case I messed up. I failed to mess up.!!!GONE!!!
2: 2 modified bicycle frame-mount U-lock brackets. These are perfect for holding ACT Labs silver pistol light guns [which I no longer have]. See this old post of mine for inspiration: http://forum.arcadecontrols.com/index.php/topic,66908.msg677659.html#msg677659
!!!GONE!!!3: 2 yellow bicycle water bottle cages, which act splendidly as drink holders  for your glass bottles, aluminum cans, red Solo cups, coffee mugs, even your wine glasses! [I mounted my new light gun holsters where these once were--worry not, I still have 2 more drink holders remaining on my cab]

Hit me up if you're interested. Pick up in the SGV in Los Angeles, or shipping from 91103.

Thanks,
-Jason

[cools]

Nanao MS8-18FB chassis. Not working, it's missing a hybrid (scavenged to fix another chassis). I'd keep this for more spares but I have working MS8-18 chassis so it's no longer required.

25 cent coin mech (weighs 650g unpacked).

Electrocoin Neo Geo Upright Manual

Chungwa M34AFA60X tube and VGA yoke - burn free. known to be working

Toshiba 470MSB22 tube - burn free. unknown if working or not. I know the neck (and vacuum) are still intact though.

Pics here: https://plus.google.com/photos/106019571274193779309/albums/5909089898772087233

Just pay shipping. I am willing to pack (nothing fancier than bubble wrap/polystyrene/cardboard though) and ship the tubes but this is at your own risk!

Note: I'm in the UK.

[404]

Don't expect this to last at all.

Have a geforce 8800 gts that was that had artifacts. for the lawls i reflowed the solder on the gpu and now it works just fine. Ran it through 3dmark a few times yesterday. Includes original box.

gone

[Malenko]

Don't expect this to last at all.

Have a geforce 8800 gts that was that had artifacts. for the lawls i reflowed the solder on the gpu and now it works just fine. Ran it through 3dmark a few times yesterday. Includes original box.

DIBS! you have my paypal, send me a request for the shipping cost

[Rick]

In the face of sounding even more like AJ... I am SUBSCRIBED.

[404]

Don't expect this to last at all.

Have a geforce 8800 gts that was that had artifacts. for the lawls i reflowed the solder on the gpu and now it works just fine. Ran it through 3dmark a few times yesterday. Includes original box.

DIBS! you have my paypal, send me a request for the shipping cost

sorry man, its already pending on another forum. literally lasted 3 minutes there 

Should have asked you first. would have just thrown it in for free with the am2 set. 

[Malenko]

no worries, I have some lesser video cards *somewhere*

[Rick]

sorry man, its already pending on another forum. literally lasted 3 minutes there 

That's not cool, man.

[404]

sorry man, its already pending on another forum. literally lasted 3 minutes there 

That's not cool, man.

why wouldn't it be? Should i have just posted it here? Wouldn't that be just as greedy of me?

I mostly frequent PC forums and they have freebies threads that give away tons of great stuff all the time. Many of which have helped me out in a bind or two. Why should I hold out on them just to post it on BYOAC?

[Rick]

why wouldn't it be? Should i have just posted it here? Wouldn't that be just as greedy of me?

I mostly frequent PC forums and they have freebies threads that give away tons of great stuff all the time. Many of which have helped me out in a bind or two. Why should I hold out on them just to post it on BYOAC?

I'm sure that's consolation to the person who thought they had a chance at it for posting dibs first. If it were me, I'd rather not have seen it at all than think I had a chance at it after posting. So yeah, in my opinion, you should have either a) held out on them or b) held out on us. Post it in one spot, and then if it doesn't sell, post it elsewhere.

I realize this isn't E-Bay, but still. Common courtesy is always a better way to go.

[404]

I'm sure that's consolation to the person who thought they had a chance at it for posting dibs first. If it were me, I'd rather not have seen it at all than think I had a chance at it after posting. So yeah, in my opinion, you should have either a) held out on them or b) held out on us. Post it in one spot, and then if it doesn't sell, post it elsewhere.

I realize this isn't E-Bay, but still. Common courtesy is always a better way to go.

Again, Why? You aren't really giving a reason here at all.

I post on multiple forums and there's nothing anywhere that states i couldn't post a FREE item on anyone of those forums at any given time. I actually posted it here before i even posted it on other forums. So technically BYOAC got about a good minute head start over H, TPU and other sites.

As with any freebies it's always on a "you snooze, you lose basis". I can't help that and I'm not going to pick and choose who is going to get it. If i did, I would have just offered it up to reputable members on any site i chose via pm; completely killing any basis for a freebies post in the first place.

[Rick]

Again, Why? You aren't really giving a reason here at all.

I certainly am. If you don't know what "common courtesy" means, then I'm not about to explain it to you.

I post on multiple forums and there's nothing anywhere that states i couldn't post a FREE item on anyone of those forums at any given time.

While that is certainly true, there's also nothing that says, "I'll pick and choose whatever person I like, regardless the speed at which they response" and you could completely do that as well, but that doesn't mean you should, right?

It's my opinion, and obviously not shared by you. That's fine. I just find it pretty rude to post a free item that you know will have a lot of interest, knowing that there's going to be someone who wanted it, and then would lose the opportunity to have it.

Maybe I'm in the minority here, but that's my opinion.

[404]

Again, Why? You aren't really giving a reason here at all.

I certainly am. If you don't know what "common courtesy" means, then I'm not about to explain it to you.

I post on multiple forums and there's nothing anywhere that states i couldn't post a FREE item on anyone of those forums at any given time.

While that is certainly true, there's also nothing that says, "I'll pick and choose whatever person I like, regardless the speed at which they response" and you could completely do that as well, but that doesn't mean you should, right?

It's my opinion, and obviously not shared by you. That's fine. I just find it pretty rude to post a free item that you know will have a lot of interest, knowing that there's going to be someone who wanted it, and then would lose the opportunity to have it.

Maybe I'm in the minority here, but that's my opinion.

I guess I'll have to break this down into simple bullet point sentences for you to understand.

-I posted a freebie on a first come first serve basis.

- I posted it here first.

- I then proceeded to post it on 3 other forums.  because i have contributed to those forums in the past and most importantly,  Because I CAN

- I did not pick and choose who i gave it to. A person asked for the card on another forum FIRST.


Consider sitting back and re-read what you posted. You sound hilariously childish. It's a freebie. I didn't have to post it anywhere and i to be honest, i could have pick and choose who i gave it to anyway but I didn't.   

[Malenko]

Its my fault really, I didnt want to be too greedy so I waited 15 minutes till after he posted it to reply, to give someone else here a shot at it. I dont NEED it as much as I WANT it. No gripes, if I was the other person that replied on the other forum I'd want the card too, and I respect that. I didnt consider that he had posted it elsewhere, next time screw you guys Im posting first

[404]

have a steam code for the game toki tori. Only one and it's first come first serve. PM me for the code

haven't posted this anywhere else so nobody can get butt-hurt over that. 

gone to rabidfrog

[OpFlash]

Hey everyone I wanted to throw this out there for someone who may want to come and grab some free stuff...  I want to give back to this awesome group of people some of who helped me get my own MAME project finshed.  Anyway heres what I have....

Electrohome G07 19" has some slight tron burn in..  The monitor powers up fine only thing is that its missing the nut for the horizontal width coil.

A second Electrohome G07 19" this one has the faintest burn of something but its really like none at all Im being picky.  Powers up fine same issue with the horizontal width coil.

Hanatrex Polo 25" monitor complete but missing the frame.  It powered up but I didnt have the time to fully test it.  I believe I have the complete power supply for this monitor.  This monitor / power supply came out of a Mortal Kombat

Good stuff I live in Chicago on the North Side  Would like to have this stuff moved ASAP as im really in need of some space.
feel free to PM me and we can figure out a time to come by. 

[OpFlash]

No takers on the monitors???  Im really not in the mood of trying to post ads on craigs list /ebay and dont want to put em in the alley for the junkers...  Anyone want just the frames and or chassis let me know I would be willing to ship out if the shipping is paid for.

[Raktageno]

No takers on the monitors???  Im really not in the mood of trying to post ads on craigs list /ebay and dont want to put em in the alley for the junkers...  Anyone want just the frames and or chassis let me know I would be willing to ship out if the shipping is paid for.

Hi there! I have been wanting to get started building my own cabinet and lucked into a shell the other day and may be interested in the larger screen you have. I'm in Oklahoma City though, any idea on what shipping would cost?

[OpFlash]

Hi there Im sure that the shipping would be quite high since its a beast and fairly heavy.  Also its missing the monitor frame.  I suppose one could be built or the parts can be found but that could be tricky.  Lastly  I cant confirm that it would be in a 100% working condition to throw into your cab.  This monitor could be a Jem and it could also be a bit of a project to make it 100% game ready....

[Malenko]

Not a lot of people check the free thread, I'd post a "for free" thread in the BST section as well.  Shipping is going to be VERY expensive and you run the risk of the monitor being damaged.

[rabidfrog]

Thanks to 404 for the Toki tori steam code!
Cheers!

Sent from my Nexus 4 using Tapatalk 2

[Raktageno]

Hi there Im sure that the shipping would be quite high since its a beast and fairly heavy.  Also its missing the monitor frame.  I suppose one could be built or the parts can be found but that could be tricky.  Lastly  I cant confirm that it would be in a 100% working condition to throw into your cab.  This monitor could be a Jem and it could also be a bit of a project to make it 100% game ready....

Thanks for the advice! I'll get one around here.

[OpFlash]

sounds good! good luck with your cab 

[lordnacho]

Who wants a pretty crap game?  Up to first pm
Brütal Legend Steam Key
Gone to mes83

[cw]

Free Pole Position 2 upright cab.  No monitor or pcbs..  easy driving mame hack!

Austin Texas


gone

[AlienInferno]

Free Pole Position 2 upright cab.  No monitor or pcbs..  easy driving mame hack!

Austin Texas

Sent you a PM.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[404]

free steam copy of Dark Void Zero.

Be warned the game sucks. It sucks more butt-hole than the only working toilet at a fat camp.

first person that posts a response here gets it.

[Ginsu Victim]

Why not... I'll take it. Thanks.

[vindic8r]

FREE TV!

This silver JVC 27" CRT TV (Model AV-27S33) is from 2002, and is in fantastic condition. If you can come and pick it up, it's yours. No charge. Located in the NW suburbs of Chicago.

This thing is in seriously great shape. If you're adventurous, I'd wager it could be converted for use in a cabinet. It sports RCA, S-Video and Component inputs, including a set of RCA inputs on the front.

Come and get it before I have to throw it away or donate it.

[childsremix]

Located in Vacaville CA I have a Mortal Kombat 4 cabinet that's been gutted.  May be some wiring in there but theres no coin door, monitor etc.. basically just the wood.  Artwork is still intact.  If you interested send me a PM.

[Thenasty]

If you own a Double Dribble Machine, you could use this.

FREE +S/H Double Dribble Instruction card and some button decals/lables.

[404]

so i was at work today and someone threw a box at me. a small but very heavy box. It was so heavy that it wobbled my head a bit. Just as i was about to get up and crack a skull or two, I looked at the box and it was labeled 'RAM'. I opened it up and there was tons of ram nicely filed in this box laid with anti-static foam. This box has everything from pc100 sd ram all the way up to some ddr2.

there is simply way too much to even go through and make a serious list. If you happen to have an older rig you are setting up for a mame project and need a bit more ram. let me know. Please, no hoarding.

[BobA]

I could use 4 DDR2 ram, 1 g or 512 k if you could mail them to me.  I will pay for the postage any packaging that is needed.

Thanks BobA

Address to calculate shipping

313 84 St. SW
Edmonton, Alberta
Canada 
T6X 1H8

[404]

4200 or 5300?

pm me your full address. I will try to get this out to you before the end of the week. No promises on the timeframe as I'm a slave to my job. 

[roknrol]

@ 404

Do you have any 1GB sticks of PC3200 DDR2 in your cache? If so, I could use two!

Would certainly paypal you for the shipping expenses! 

[404]

@ 404

Do you have any 1GB sticks of PC3200 DDR2 in your cache? If so, I could use two!

Would certainly paypal you for the shipping expenses! 

unfortunately. no

I do have some pc 4200 DDR2. should step down to your speed just fine unless you have a very very picky motherboard. judging by the use of 3200 ddr2, that should be a late 478HT, early Socket 775 unit or late amd64 board. If you want to take a chance on the ram, drop me a pm with your address.

[NickG]

Free XM29 presentation monitor (this is the older version with the I/O's on two separate panels on each side of the neck cover) Pickup only,  in Arlington, TX. A few known issues: color convergence is not so perfect (noticeable at XGA resolution, text still readable - not so noticeable at classic game resolutions.)  Ocassionally, picture blinks off, then immediately back on.  Internal speakers were blown and have been removed.  I had milled down some of the top cover to fit in a cab long ago, which I guess one could call cosmetic damage.  Also, No remote for you!

[byrneaar]

so i was at work today and someone threw a box at me. a small but very heavy box. It was so heavy that it wobbled my head a bit. Just as i was about to get up and crack a skull or two, I looked at the box and it was labeled 'RAM'. I opened it up and there was tons of ram nicely filed in this box laid with anti-static foam. This box has everything from pc100 sd ram all the way up to some ddr2.

there is simply way too much to even go through and make a serious list. If you happen to have an older rig you are setting up for a mame project and need a bit more ram. let me know. Please, no hoarding.

I could use some ddr2 ram if there any 4gb modules I am looking to upgrade an older rig.

[stan2323]

Please delete this post the item is gone.

[stan2323]

I have a Super Pa-Man cabinet that I am getting rid of.  Moving in 3 weeks and will not be taking this with me.  There is no marque, no power supply, and no coin door.  The lock has been drilled, the monitor is in the bottom not mounted.  The monitor has burn in and I am not sure if it works.  The JAMMA harness is there but I am not sure if it works.  The wood is solid and has no water damage.  See pictures.  Pick up or if you make the arrangements and pay the shipper I will help load.

Stan

[DeLuSioNal29]

Wish I was near you (I'm in CT).  I'd be there in a heartbeat!

DeLuSioNaL29

[APFelon]

I posted this on Reddit, but maybe I'll have better luck here:

Free to pickup in MN: WG 25k7124 25 inch monitor.

The monitor has zero burn in, but the chassis puts off no HV. I have since replaced the monitor in my MAME cab so I have no need for it. The chassis has been recapped with a kit bought from HAPPs within the last five years or so.

Pickup only; I don't want to ship this monster and I don't want to separate the chassis from the tube.

If you come to pick it up, I'll even let you pick through my arcade parts (joysticks, coin doors, mechs, tokens, etc) and you can take some of that stuff home with you as well if you want.

I live near Monticello, which is half way in between St. Cloud and Minneapolis. PM me if interested.

[CalixPapi]

Not my post but maybe somebody in the area can snag this. Wish I had the room for it.

http://sacramento.craigslist.org/vgm/4516423298.html

[jasonbar]

GONE--THANKS!!!

Didn't get any takers who wanted to pay $.

http://forum.arcadecontrols.com/index.php/topic,138836.msg1436943.html#msg1436943

Free. Just pay shipping. Don't want to scrap this. :]

Thanks,
-Jason

[jmike]

Damn shame that someone would just dump this on the side of the street.

http://newyork.craigslist.org/brx/zip/4569561122.html

 artwork looks pretty good.

 

[DeLuSioNal29]

Lol. I just BOUGHT an empty Nintendo cabinet tonight near there. Wish I had seen this earlier.

[jmike]

Lol. I just BOUGHT an empty Nintendo cabinet tonight near there. Wish I had seen this earlier.

Guessing you bought the one in Long Island.
Good find DeLusional.

 

[DeLuSioNal29]

Yeah, I popped on it.  He also had a non-working Centipede which I also bought.  I have my hands full with projects now.   

D

[nikolas2003]

Hi,
Here's stuff I want to give :

20 x red button
1 x player 1 button
1 x player 2 button
2 x sanwa joystick
1 x spinner
I-Pac card
wire

PM me if interested...Thank's

is no longer available...thanks

[jmike]

Seriously. I'll take it Pm sent.

[Malenko]

Gimme  dat ipac mike

[jmike]

Gimme  dat ipac mike

Hopefully I sent the PM first.
You know I would Malenko but it kind of belongs with the set. 

[Malenko]

Lolololol. All good bro

[nikolas2003]

Hi jmike,
I can't reply to personal messages...could you send me your zip code for the shipping cost at my personal email :


I will go to the post office at the end of this week....
Thanks!
Nicolas

[jmike]

Sure thing email sent.

 

Thanks.

[Malenko]

nikolas2003  I think you need 2-5 posts to be able to PM, just for future reference.  Also, kudos for you to pass along items you dont want/need anymore for the cost of shipping. 

[nikolas2003]

malenko, ok thanks for the info  I'm now able to send/reply personal messages

[Slippyblade]

Gamecube DK Bongos.  They worked last time they were used about 2 years ago.  Been on the shelf since, my GC died.

Pay shipping and they're yours.

Gone.  Thanks!

[yotsuya]

Gamecube DK Bongos.  They worked last time they were used about 2 years ago.  Been on the shelf since, my GC died.

Pay shipping and they're yours.

Where's the other free stuff? 

[jmike]

Hi,
Here's stuff I want to give :

20 x red button
1 x player 1 button
1 x player 2 button
2 x sanwa joystick
1 x spinner
I-Pac card
wire

PM me if interested...Thank's

is no longer available...thanks

Just a quick update all parts received.
Thanks again Nicolas you're aces in my book.     

[Rick]

Just a quick update all parts received. Thanks again Nicolas your aces in my book. 

After you received all of the coolest parts offered in recent memory, I have no problem with telling you the following: "you're"

[jmike]

Just a quick update all parts received. Thanks again Nicolas your aces in my book. 

After you received all of the coolest parts offered in recent memory, I have no problem with telling you the following: "you're"

Fixed.  Thanks Rick. Still waking up here.

[Rick]

Fixed.  Thanks Rick. Still waking up here.

Still jealous.



But you're right. Nikolas2003 (and everybody who offers up stuff for free!) are definitely great, and should be applauded.

[gonzojoey]

I'm moving out and need to find a new home for my project. She's been good to me, but being the neglectful owner that I am, I never finished her and she's been sitting for a while. Looking for someone who is willing to take good care of her and find her a loving home.
Cabinet is solid, 19in LCD installed, LED WIZ+GP installed and working, all CP buttons wired up and lighted, PC and monitor wired into power supply so only one power cord to power the unit. PC has Mamewah front-end but I never did any of the config on the GPWiz / Joy2Key to get the CP buttons lined up with the proper inputs. It wouldn't take much to get her all working great.. but I really don't have the space in the new place and need to find a new home for her.

 Located in Simpsonville, SC 29681

[jasonbar]

Very cool...but where is it located? :]

-Jason

I'm moving out and need to find a new home for my project. She's been good to me, but being the neglectful owner that I am, I never finished her and she's been sitting for a while. Looking for someone who is willing to take good care of her and find her a loving home.
Cabinet is solid, 19in LCD installed, LED WIZ+GP installed and working, all CP buttons wired up and lighted, PC and monitor wired into power supply so only one power cord to power the unit. PC has Mamewah front-end but I never did any of the config on the GPWiz / Joy2Key to get the CP buttons lined up with the proper inputs. It wouldn't take much to get her all working great.. but I really don't have the space in the new place and need to find a new home for her.

[gonzojoey]

Very cool...but where is it located? :]

-Jason

Oops.. updated post. I'm in South Carolina.. i must have been so heartbroken when posting that I forgot to include the location

[ImGreenman]

This would look great in my house pity I live in Ireland

[iscariot]

PM Sent....

[Wilimnot]

FREE ARCADE VGA BREAKOUT CABLES.

Just pay $6.00 for s/h to USA only.


I make this cables as I find Monitors being thrown away. I snip the cables and make it usefull.

I now have plenty of VGA cables. Got them from a company that purchased new monitors and used the DVI/HDMI cable instead of VGA.
Each one of this cables makes 2 VGA Breakout.
See pic below.


All that I make are fully tested in my Arcade Monitor Mame Cab (Guaranteed working).


A diagram below to make one yourself.
Pins mark with * you don't use.
If Pin 9 exist on your cable, consider it *.
In order to get composite, you just need to twist 2 wires (13 & 14) and connect to your monitor SYNC.
Use a multimeter continuity to trace what cable is what. Don't go by the colors of the wires.
Connect all GND together.
The RGB should be easy to figure out.



FREE POWER SUPPLY 200watts+ OLD TOGGLE SWITCH TYPE ($10.00 for S/H).
http://forum.arcadecontrols.com/index.php?topic=101280.0

I'm trying to send you a pm about the VGA cable, but can't.  I just recently bough a dedicated MK cabinet and I'm restoring it.  A dream project of mine.  I'm interested in the VGA cable, because I'm using my PC to build my machine. 

[JDFan]

FREE ARCADE VGA BREAKOUT CABLES.

Just pay $6.00 for s/h to USA only.


I make this cables as I find Monitors being thrown away. I snip the cables and make it usefull.

I now have plenty of VGA cables. Got them from a company that purchased new monitors and used the DVI/HDMI cable instead of VGA.
Each one of this cables makes 2 VGA Breakout.
See pic below.


All that I make are fully tested in my Arcade Monitor Mame Cab (Guaranteed working).


A diagram below to make one yourself.
Pins mark with * you don't use.
If Pin 9 exist on your cable, consider it *.
In order to get composite, you just need to twist 2 wires (13 & 14) and connect to your monitor SYNC.
Use a multimeter continuity to trace what cable is what. Don't go by the colors of the wires.
Connect all GND together.
The RGB should be easy to figure out.



FREE POWER SUPPLY 200watts+ OLD TOGGLE SWITCH TYPE ($10.00 for S/H).
http://forum.arcadecontrols.com/index.php?topic=101280.0

I'm trying to send you a pm about the VGA cable, but can't.  I just recently bough a dedicated MK cabinet and I'm restoring it.  A dream project of mine.  I'm interested in the VGA cable, because I'm using my PC to build my machine.

New accounts can't PM until IIRC 5 posts so make a few more posts and you should be able to PM him (though the post you quoted is 8 years old he is still on the forum so might respond.)

[Malenko]

thenasty does still make cables, so you've lucked out. JDFan brings up a great point though, check the dates on posts.

[Thenasty]

Yeap, still offer this for BYOAC members.

[1UP]

Anyone for a fixer upper?  My original cabinet is sitting on the curb for anyone who wants it.  It is gutted, but there are a few odds and ends inside, some random controls, monitor brackets, marquee glass, and the control panel frame sitting not far away.  If you have a truck and slme friends, go for it before the dump truck gets it.

12600 Hunnewell Ave
Sylmar, CA 91342

1UP

[Generic Eric]

The words? Where are they?

[menace]

+1--back in the day, that cabinet defined the rotating panel and was a large inspiration for my project (which sadly moved on a few years ago...)

[jdbailey1206]

The words? Where are they?

SO DO YOU!  Oh heh.  Sorry.  Reflex.

[yotsuya]

Anyone for a fixer upper?  My original cabinet is sitting on the curb for anyone who wants it.  It is gutted, but there are a few odds and ends inside, some random controls, monitor brackets, marquee glass, and the control panel frame sitting not far away.  If you have a truck and slme friends, go for it before the dump truck gets it.

12600 Hunnewell Ave
Sylmar, CA 91342

1UP

What a great offer! I'm kind of curious, why is it at this point? 

[Generic Eric]

The words? Where are they?

SO DO YOU!  Oh heh.  Sorry.  Reflex.

Seriously.  This was THE project to watch back in the day.  It was a great time to be alive.

[1UP]

Anyone for a fixer upper?  My original cabinet is sitting on the curb for anyone who wants it.  It is gutted, but there are a few odds and ends inside, some random controls, monitor brackets, marquee glass, and the control panel frame sitting not far away.  If you have a truck and slme friends, go for it before the dump truck gets it.

12600 Hunnewell Ave
Sylmar, CA 91342

1UP

What a great offer! I'm kind of curious, why is it at this point? 

Well, life finally got in the way of continuing this project.  I was recently offered a job at Industrial Light and Magic which ended up being a nightmare of a relocation from Los Angeles to San Francisco.  My wife had to sacrifice so much to make this happen, so I had to sacrifice as well.  This cabinet has been in pieces for several years pending some major upgrades, and since then we have had to move it twice.  It's always been the most difficult item to move.  This time it would have had to go up a narrow set of stairs that turn 180 degrees.  So much technology has changed since it was built, the form factor just didn't make sense any more.  I decided that it was time to rethink and redesign.  I'm already planning its replacement, which explains why I've salvaged all the guts.  Most likely something along the lines of a wall mounted flat screen and a 4 player podium with some interchangeable elements, that can all be dismantled and fit into a hatchback.  It's a sad day for sure but it brings some relief as well.

I really hope someone can salvage it and get some enjoyment from it before it turns to dust.  Was a fun thing to design and build.

[DaOld Man]

*Gone*

Sorry, I think I made a mistake by not putting this post in here first.
Free card that came out of a 15" elo touchscreen monitor. The screen touch sensors plugged into this card.
Don't know if it works or not, pretty sure it does though.
Free, you just pay postage.
Gonna keep it on here another week then it goes to recycle bin. (trying to get rid of some junk that is starting to making my house look like a hoarder lives here. LOL)
There are some pics in my original post:

http://forum.arcadecontrols.com/index.php/topic,142084.0.html

[SteveJ34]

Once upon a time many moons ago I had a marquee printed for my cab based on the Lucid design at a local print shop. They had some issues with printing and I ended up with the extra copies seen below.

The one on top has a few very minor micro scratches, one in the A of Arcade but you can't really see it once lit.

The one on the bottom has a minor ink smudge on the left side border likely not seen once mounted.

They are 28" x 10" and I will ship the sheet for free likely by rolling it up and stick in a tube for mailing.

Use them for a project, stick them on a wall, or ?

FREE to anyone that may have a use for them including shipping.

[Generic Eric]

Once upon a time many moons ago I had a marquee printed for my cab based on the Lucid design at a local print shop. They had some issues with printing and I ended up with the extra copies seen below.

The one on top has a few very minor micro scratches, one in the A of Arcade but you can't really see it once lit.

The one on the bottom has a minor ink smudge on the left side border likely not seen once mounted.

They are 28" x 10" and I will ship the sheet for free likely by rolling it up and stick in a tube for mailing.

Use them for a project, stick them on a wall, or ?

FREE to anyone that may have a use for them including shipping.

Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

[Thenasty]

I'll take the other one if that's OK (07604).

[SteveJ34]

Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

These are printed on a material that by design is intended to be illuminated.

I offered these for free including shipping. My gift back to our member community.

Send me your shipping info via PM and I will get this out to you this week.

[SteveJ34]

I'll take the other one if that's OK (07604).

It's yours and I will cover postage, just send me your shipping address via PM.

[SteveJ34]

Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

These are printed on a material that by design is intended to be illuminated.

I offered these for free including shipping. My gift back to our member community.

Send me your shipping info via PM and I will get this out to you this week.

I still have (1) of these left.

Free to whoever can put it to use including shipping.

[Generic Eric]

Pardon for asking, can the be illuminated?  Or are they stickers? I'd only want one. Shipping to 58220?  Do you paypal?

These are printed on a material that by design is intended to be illuminated.

I offered these for free including shipping. My gift back to our member community.

Send me your shipping info via PM and I will get this out to you this week.

I still have (1) of these left.

Free to whoever can put it to use including shipping.

Received today in the mail.  Thanks!

[tkropp17]

Located outside of Philadelphipa, zip 19462

I really don't think I can ask anything for this, but thought it would be cool for someone else to fix up and use if they wanted a side project.

[mike96sc2]

Free - 33" Monitor - No picture. Taken out of showcase cabinet. If you're interested and will pay for shipping, it's yours.

Forgot to mention - shipping from 52402

[jasonbar]

Black plastic coin box & its steel bracket. Used but intact.

Hi-res gallery: https://www.dropbox.com/sh/egyusdft0xj881v/AADOrn6ya7dbHeWRajfDCqcua?dl=0

About 10" wide x 6" deep x 8" high.

Shipping box is 14"x10"x7", 3lb, coming from USA 91101.


Thanks,
-Jason

[fillup7682]

Have a free Kortek 27 multisync monitor.  I haven't used in 2 years but last time it was plugged in it worked fine.  I need the storage space and don't plan on using it anymore since I have upgraded.  You will have to move it yourself.  It is heavy (prob 70-80lbs).  I live in the Arlington VA area,  near DC.  LOCAL Pick up only. 

[DeLuSioNal29]

Is this still available?  I'm planning on making a trip to VA in March and I can swing by to pick it up then.  If not, I have a buddy who lives in Woodbridge, VA who can pick it up sooner if need be.  I'll need to check with him first of course.

Thanks in advance and let me know...  It will go to a good home.   

DeLuSioNaL29

[ArkhamA]

For fillup7682, if Delusional29 doesn't come through on getting that monitor, let me know I'm right around the corner and can come by anytime. I need it!! I'll get in line behind him. Thanks either way in advance.

[DeLuSioNal29]

ArkhamA, if you need it - no worries. You can have it by all means!  Just put it to good use!  :-)

[ArkhamA]

Thank you Del!!....I'm apparently not allowed to PM?? So I have to see if fillup responds on here.

[PL1]

I'm apparently not allowed to PM??

Post a few more times and your PM system will automatically enable.   


Scott

[NickG]

DFW,TX...Free monitors on craigslist, not mine, just a heads-up
SONY PVM 2950Q, SONY PGM-200R2U, some burn-in from airport usage.

http://dallas.craigslist.org/dal/ele/4891894736.html

[GearHead]

Found this on Craigslist.

Free Tekken 4 in New London CT

http://newlondon.craigslist.org/eld/4917523612.html

[DeLuSioNal29]

Thanks. I'm near there. I will email the guy and swing by.

[pbiancardi]

Free Arcade Monitor, I am sick of trying to setup and configure and am going to switch to an HD display, need gone tomorrow (Saturday) so I can finish my project -

http://chicago.craigslist.org/nwi/sop/4919523272.html

Monitor works fine, no issues.

[sc23]

Converted a SEGA Super Megalo 2 to MAME as it had a dead rear projection screen I couldn't fix. Still have all the original parts from machine like game select board, power supply, audio amp, and several boards I don't even know what they do. Plus I have the rear pro screen in storage. Anyone looking for parts from one of these machines, hit me up and I will send them, would love it if some of my parts could help in someones restoration.

[j.fitzenr]

No clue if anybody wants this thing it's old and junky but, just stumbled onto it a few weeks ago in the basement and can't come up with a reasonable use for it, but I hate the idea of wasting stuff if anybody can use it.

Old school Dell Inspiron 4100.  P3! 1.2ghz Box 256 ram I think, 14.1 4:3! screen, valid XP Key on it but currently running Puppy Linux.  Most interesting reason I figured somebody might want it is it's about the only 4:3 laptop I've seen since the Clinton years.  Everything seems to be functional, adapter works, etc, has a removable CD drive, think I may have the floppy drive around somewhere too but not positive.  Also has a cardbus WIFI card that currently isn't configured. 

It's ancient and not the nicest piece of work, but if anybody here wants it for parts, the screen, or some weird project I'll shoot it out to ya for shipping.  Figured I'd offer it here before I recycle and/or office-space it.

EDIT: Couldn't hunt down the 3.5" drive, but I'll keep looking.  Battery holds a charge but not for too long...  looks like shipping USPS most of the US is gonna be around that $15 mark.  Thing is probably going to get gutted or recycled soon, so if there's any random interest speak now! 

[Mr_Numbers]

No clue if anybody wants this thing, just stumbled onto it a few weeks ago in the basement and can't come up with a reasonable use for it. 

Old school Dell Inspiron 4100.  P3! 1.2ghz Box 256 ram I think, 14.1 4:3! screen, valid XP Key on it but currently running Puppy Linux.  Most interesting reason I figured somebody might want it is it's about the only 4:3 laptop I've seen since the Clinton years.  Everything seems to be functional, adapter works, etc, has a removable CD drive, think I may have the floppy drive around somewhere too but not positive.  Also has a cardbus WIFI card that currently isn't configured. 

It's ancient and not the nicest piece of work, but if anybody here wants it for parts, the screen, or some weird project I'll shoot it out to ya for shipping.  Figured I'd offer it here before I recycle and/or office-space it.

How much would shipping be to 32907?

[Mr_Numbers]

I'm not going to be able to get the old school laptop, but shipping quoted was very reasonable ($15).  Just an FYI for any other interested parties.

[j.fitzenr]

hegone!

[AtomSmasher]

Free SlikStik Cabinet in Irvine, CA
Got it free on Craigslist years ago, but never got around to doing anything with it.  Includes coin mech and marquee light.  The laminate on one side was starting to peel off, but can easily be glued back on.  Currently wrapped in plastic from the last time I moved.

http://imgur.com/a/gRvzG

[reptileink]

Free Virtua Fighter cabinet in Windsor CT
http://hartford.craigslist.org/zip/5021557226.html

[kangarolf]

I have to give away

1 - Sega 29 inch medium res Naomi monitor which is working but has some scratching to the front
2 - Neck board for a naomi medium res 29 inch monitor unknown state.
3 - adjustable foot for a naomi cab that is ok but needs sanding and painting.

All available to whomever wants to come and collect from South Manchester, UK

[PetitMorte]

Hi Guys,

I'm in Canal Winchester, on the southeast side of Columbus, OH.

I have the essential innards of a RoadBlaster machine for whoever wants to stop by and pick em up.
Everything was working the last time I plugged it all together, but it has been sitting in my garage for 6+ years untouched since then.

I have the full Atari System7 motherboard with the RoadBlasters daughterboard (2'x3' on a steel backing plate), a 19" LR40363 monitor, the sound board (recapped), and the power supply.

Come and get it before my wife recycles it!

Thanks.

[DeLuSioNal29]

Wish you were closer. I'd love to have that monitor.

[cw]

austin  tx


pinball head.  No glass,  display driver pcb and 2 displays in place but they dont look good.
all wiring is in place and looks to be solid.


its from a firepower

[reptileink]

This has been up for a bit, but might still be avail:

Need for Speed seat and base CT Craigslist
https://hartford.craigslist.org/zip/5286366016.html

[PCTech714]

Hey, everybody!

I've found myself in a terrible position for an arcade cabinet owner/builder. My BABY that I started building from scratch in 2006, is heading for the junk heap.  Control panel, computer hardware, speakers, bezel, some of the physical hardware, etc. is all gone, except for the cab itself which is rotting. 

The only piece that remains in good condition is the Wells-Gardner D9200 monitor.  It's in great condition, although I noticed before taking it out of the cabinet that the screen is a little brighter than normal; probably just needs a simple adjustment.

I'm in the process of moving so shipping is out of the question (I'm just too busy!).

If anybody lives near southwest PA, please get in touch and get this off my hands.  I'm not even sure how to dispose of it properly if nobody takes it, to be honest.

My last day at my current residence is November 28, 2015, so if you're interested let me know ASAP and we can make arrangements.  If you're looking for a more specific location, I'm in the South Hills of Pittsburgh near Bethel Park/South Park (zip 15129).

Thanks,


Joe

This item has been taken. Thank you, DeLuSioNal29 for your help!

[DeLuSioNal29]

I know someone who will grab it.  PM me your contact info.

DeLuSioNaL29

[lordnacho]

Free steam codes:
Overlord
Operation Flashpoint: Dragon Rising
Operation Flashpoint: Red River

Heard of them, but no idea if any good.  I won't ever play them. 

[Slippyblade]

Overlord is amazing, I own it on two different platforms.

[freestuffonme]

I have two Sony Wega Trinitron KV-XBR800s - A 300lbs 40inch and a 200lbs 36 inch. They're free if you can carry them out of my house.    It requires 3 people and a truck/cargo van to move them. I'm located in Bensonhurst Brooklyn. PM if you're interested.

[DemonWarp!]

Monitor is gone. Please delete.

[Bumblebounces]

Sacramento/Elk Grove, California

Posted to Craigslist.  For more details, click here: 

http://sacramento.craigslist.org/zip/5369075399.html

[Gatsu123]

Converted a SEGA Super Megalo 2 to MAME as it had a dead rear projection screen I couldn't fix. Still have all the original parts from machine like game select board, power supply, audio amp, and several boards I don't even know what they do. Plus I have the rear pro screen in storage. Anyone looking for parts from one of these machines, hit me up and I will send them, would love it if some of my parts could help in someones restoration.

I am in the process of restoring a Super Megalo 2 and would be interested in any extra parts you have if they are still available.

[Sinner]

I have number of Gameroom magazines from 2010 and before.
If anyone wants them and are in the GTA, they're all yours....
Thanks,

Matt

[freakqnc]

Brooklyn (Dumbo Area).
Spectrum coin operated vintage dart machine (for parts of repair)

Free with pickup!
Contact me soon or will have to sent to recycling

Thanks
 

[stevejt]

Hey all.  Been out of the hobby the last few years, and cleaning out basement.  I figured I post here before craigslist.  Some free stuff if you are local, not worth a long drive.  2 boxes of misc stuff  some fluorescent fixtures, some extra bulbs.  2 coin doors, 1 is patched on front.  25' monitor, 2 boards idk what they are.  and a 10 spot cabinet, game never worked i got cab for free.  if any one is interested let me know at stevejt@hotmail and i will take pics

thanks
 
All free parts and cabs are gone 

THANKS ALL

Steve

[DeLuSioNal29]

Hey Steve. I'm heading to Long Island on Saturday 7/23. I would love the items. What part of the island are you on?

Edit. Just realized I never hit Send.

DeL

[Madman]

Guys,
I have the guts of a Qbert machine sitting in my garage that I really don't want to throw away.
When it was pulled it worked minus the display (no power). The display is there as well and should be an easy fix... this was stuffed into a diff box so not sure if harness's and such are original.
what I have:
Mainboard
power supply
display
misc wires screws / harness
This was given to me and I really dont have time for it
its located in southeast michigan.
Still have this as of 9/11/16 Everything will be put to trash in 3 days

[HaRuMaN]

Could you ship?  I would gladly pay for shipping (minus the monitor). 

[pbj]

About ready to toss a couple of non-working Megatouch cabinets.  SW Houston.  No shipping, no delivery.

These have been trashed.

[mohawk640]

Looking for any thing free in Chicago

Sent from my 5054N using Tapatalk

[BrentRadio]

I have 5 19" tv's of different makes and models.

These are left over from my haunted house from last year and I don't need them anymore.

Free to anyone who want's them. I have no idea what tubes they have.

PM me if you want them. Please take them all if you want them.

Thanks,

Brent

[roknrol]

I have a Viewsonic 15" LCD in need of a home. Working, includes transformer and stand (if wanted). Was going to use it for a project, but went with a 17" instead. Good shape, no scratches.

Pickup in 64105. Kansas City, MO

[KPez]

A lot of cool stuffs here!

[nukie]

Not sure if anyone is interested but I have a 32" Magnavox CRT Tv up for grabs.  Has two composite in and one composite out.  One of the composites is shared with an S-Video.  No remote at the moment, but if I find it I'd gladly pass it along.

Located in Southern Twin Cities area of MN (Burnsvile/Savage)

[cw]

spy hunter cab in great shape.... artworkin good shape  no cp or coin door...this is a shell...



austin tx



its gone......

[JoeStrout]

EDIT: This TV has been taken.

[nipsmg]

I recently acquired a Sony KV-36XBR400 HD Ready CRT TV that was going to decase and put into a showcase cabinet, but the project never got off the ground.  TV is in great condition.  Located in Cheshire, CT.  Totally free.  YOU MUST LIFT from the ground into truck/SUV.  Please bring one (or more) people to help you lift, it weighs something like 240lbs. It is currently sitting on a dolly in a garage.

[Fursphere]

Rancho Cordova, CA

Spyhunter control panel
Spyhunter gas pedal

both assemblies are complete, just a little rough. Wiring harness connectors are still in place.

Free!  Come get them out of my garage!   PM me.

[JonathanT]

Free partially built cab with a Samsung lcd monitor installed.  I started this project a while back, but simply don't have the time.  It's made of MDF, so is quite heavy.  few pics below.  If you are interested, drop me an email on jonathanrtaylor at aol dot com (I don't logon here very often, so email is the best way to go):






large gif hosting

[Santoro]

Edit:  TAKEN!  Nice meeting you asantora!

Mostly empty Space Duel Cabinet free if you pick it up in NJ - 07920. I can't deliver.

It's physically in a bit rough shape but the artwork is pretty good.  I started some Bondo work and never got time to finish it.  Marquee NOT included, I am keeping it to make a lightbox later.  Everything else you see is included.  There are a few boards in there, I have no idea what they are, if they work, or if they are complete.  The internal support wood seems to have been tinkered with and is probably not in its original condition.  The original black cardboard bezel is in there also but is very beat up, but you could use it as a template to make a new one.  Coin door with mechs included, looks easily restorable.

The control panel is metal and was reworked for some other game. 

As is, no returns - I am moving and need it to stay gone .

[Santoro]

more

[Santoro]

Last Pics

[asantora]

Last Pics

Santoro, I live a few miles from you. Would love to pick this up if it's still available.


Sent from my iPhone using Tapatalk

[Santoro]

Last Pics

Santoro, I live a few miles from you. Would love to pick this up if it's still available.


Sent from my iPhone using Tapatalk

PM Sent....

[DeLuSioNal29]

Where are you moving to out of curiosity?  I'm not far from NJ (tristate).  Just curious, always looking for nearby BYOACers.

[Santoro]

Moving a few towns south from here to Branchburg NJ.

[pbj]

Located in SW Houston.





Dartboard, boards, wiring harness, monitors, out of an Arachnid Super Six machine.  Worked fine, cabinet disintegrated in the Houston humidity.  I need to make some space and clear this out.

12 pack of Shiner would be appreciated, but if you show up and haul it off you can have it free.

[PileDriver]

Anyone in the akron, ohio area interested in some free Real arcade PCBs.
Total of 7
SAGA Out run
Super Champion Baseball
Main Event
and 4 unidentified
All were working when pulled .
Next step is the trash. Must go this week!
Thanks!
 

[DeLuSioNal29]

Can I grab the Sega Outrun?  PM sent.

[IG-88]

I'd gladly pay for shipping on the unidentified ones if your willing to ship them.

[PileDriver]

Outrun is er... Out running.. LOL

I'd gladly pay for shipping on the unidentified ones if your willing to ship them.

IG, If there are no local takers, There yours.

[IG-88]

Cool. Let me know.

[PileDriver]

Cool. Let me know.

No problem.. I think you will get them.
I just looked up my reg date 2005  Damn I'm old
Is saint still around? and did he ever finish the " project"   
I'll need to get up to date..

[IG-88]

I dunno. I ain't been on here in forever either.

[DeLuSioNal29]

Yep, Saint is still around.  :-)

The board has been pretty quiet as of late though.  Only a few of us old timers still here.   

Thank again for the board Chuck!

Jason
DeL29

[pbj]

PlZ god someone take my dartboard trash

[lwizardl]

Anyone in the akron, ohio area interested in some free Real arcade PCBs.
Total of 7
SAGA Out run
Super Champion Baseball
Main Event
and 4 unidentified
All were working when pulled .
Next step is the trash. Must go this week!
Thanks!

if any of these are still available and if your willing to ship them I am interested shipping would be to battle creek, michigan 49015

[PileDriver]

Sorry Guys, I had notification turned off for this board.(don't know why) Fixed now.
Outrun shipped today, PM to DeLuSioNal29 will be sent shortly.
Identified all but 1 PCB
IG-88 has 1st pick
Boards are as follows:
Main Event 4 player
Super Champion Baseball
Special Criminal Investigation
Mr D's Castle
Sega Choplifter
Lost Tomb by Stern
1 still unidentified clone PCB
 

[DeLuSioNal29]

Wish I had known it was a Mr. Do's castle. I would have taken that too to save on shipping. :-/
I'm a big fan of Mr. Do! And own both Universal and Taito PCBs.
It would be a cool project to have a 2 in 1  Mr. Do! And Mr. Do's castle cabinet.

DeL

[PileDriver]

Sorry I've had this stuff for a Looooong time.. I just spent the time (hours) to ID them

[IG-88]

Sweet! I'd take the Mr. Do! Castle (sorry Del, I got a Mr. Do also and had same idea) Lost Tomb, Sega Choplifter, Special Criminal Investigation, and the unidentified pcb. Do I need to PM you my address?

[DeLuSioNal29]

Hi all, PileDriver asked me to let everyone know that all items have been taken. (He's having trouble accessing BYOAC and we are working on it.)

I grabbed the Outrun Boardset. The rest he gave away locally.

DeL

[IG-88]

Hey Del, can I PM you my email addy to pass onto him?

[IG-88]

Oh, nevermind. Didn't see he got rid of them locally.

[Slippyblade]

Got a code for the game Rebel Galaxy from GoG.  I already own it, so it's up for grabs.

HUR3875F3DBA42C9TG

Sign into your GoG account and use the link:

https://www.gog.com/redeem

[pbj]

I don't play Overwatch but got some loot crate code through Amazon...

4PMM-TQ8S-5R4J3-D96B-LH3B


 

[Easter]

SONY KV-25F2U 25" 4:3 CRT Trinitron TV with SCART

Complete with speakers, and remote control.

Perfect for a DIY arcade cabinet.  I was going to build myself, but didn't get the time.  I managed to get it wired up to a PC using lead I built, but it wasn't the best soldering so it's a bit dodgy.  Lead for free too :-)

Collect from READING, BERKSHIRE, UK - RG7 6EY.

[iguanastorm7]

Would you be willing to ship this Sony tv to the USA if I paid shipping?

[SlammedNiss]

I have a gutted Atari Space Duel upright if anybody here wants it. Want to give somebody here the chance to get it for free before I list it on the local b/s/t site with all the vultures.

It's just the gutted cab with back door. I do have the original CP, but it was cut up to add a custom button layout for mame. Other than that, no side art, glass, marquee, coin door, etc.

From what I remember its in pretty good shape, but can post pics if anybody wants me to.

In hutchinson, KS. (67502) You pick up.

[Dervacumen]

Box of misc arcade parts, about a banker's box.
Happ ms pac / galaga reunion joy
Happ Ultimate Joy
Happ Competition Joy
Happ cherry switches, concave buttons mostly white and purple
Leaf switch converters to fit Happ cherry switches
One of Encryptor's Tron restrictors from the first batches (I think it's still there)
A couple coin mechs
a few original coin return bezels
Some new Coin return bezels and buttons
Misc other items incl. 5-10 ft of T molding in green and purple plus samples of a few other colors.
I may have a t-molding slot cutting router bit and some bearings too.
Cold Cathode tube.
Fan.
Various capacitors.

Prefer a drop off / pick up / meet in CA - Monterey / Santa Cruz / Hollister / San Jose
Would like this to go as a whole box. If I have to ship this stuff it's probably going nowhere - just a time constraint.

Forgot how to add inline pics, sorry.

Derv

[yo1dog]

Hey Dervacumen,

Some of that stuff would be very useful for the rotating cab I am building. Especially the reunion joy and the leaf switch converters. I'm sure I will find uses for most of that stuff.

I am nowhere near CA (TX) but I am willing to pay for shipping if you ever find the time.

[Dervacumen]

@yo1dog:
I'll send a PM. Glad someone can use it!

[mohawk640]

Box of misc arcade parts, about a banker's box.
Happ ms pac / galaga reunion joy
Happ Ultimate Joy
Happ Competition Joy
Happ cherry switches, concave buttons mostly white and purple
Leaf switch converters to fit Happ cherry switches
One of Encryptor's Tron restrictors from the first batches (I think it's still there)
A couple coin mechs
a few original coin return bezels
Some new Coin return bezels and buttons
Misc other items incl. 5-10 ft of T molding in green and purple plus samples of a few other colors.
I may have a t-molding slot cutting router bit and some bearings too.
Cold Cathode tube.
Fan.
Various capacitors.

Prefer a drop off / pick up / meet in CA - Monterey / Santa Cruz / Hollister / San Jose
Would like this to go as a whole box. If I have to ship this stuff it's probably going nowhere - just a time constraint.

Forgot how to add inline pics, sorry.

Derv

Is the stuff still available

Sent from my 5065N using Tapatalk

[digitalmonkeyman]

Apparently Saint doesn't want me to post free stuff.  I keep getting deleted.
I have automotive wiper motors. 
6 total
take one or all
I only ask the actual cost of shipping.
Please PM me before I get deleted again
Not sure why he keeps deleting my posts........

[JDFan]

Apparently Saint doesn't want me to post free stuff.  I keep getting deleted.
I have automotive wiper motors. 
6 total
take one or all
I only ask the actual cost of shipping.
Please PM me before I get deleted again
Not sure why he keeps deleting my posts........

Wasn't deleted you just put it in it's own thread rather than this one -- http://forum.arcadecontrols.com/index.php/topic,158365.msg1665248.html#msg1665248

[joepopp]

One of Encryptor's Tron restrictors from the first batches (I think it's still there)



Derv

 Really looking for one of these if you still have it!

[DeLuSioNal29]

I found my spare Tron restrictor (I needed one too). Instead of installing it right away I'm thinking about creating a new mold from it since Encryptor said his broke and he no longer makes them. He's has provided me with the formula he used.

DeL

Sent from my moto z3 using Tapatalk

[toaddawet]

Subscribed/following.

[stan2323]

Found an old mother boards seems to be in like new condition socket 462.  It has a processor in it but is unknown if it works.  See pictures.  It is in Chester VA near Richmond VA.  I would be willing to mail it but since i do not know the condition I would rather give it away locally so someone does not pay shipping on something that may not work.  I do not remember anything about it. 

Stan

[cw]

big buck hunter cabs   no monitor or cpu or guns

local pick up in Austin Tx

[bobbyb13]

I have 2 green board Happ trackballs to offer up if anybody could use them.
Not like new but they do work.
If you are anywhere in the US shoot me a message and I'll ship them to you for free.
Anywhere else I could send them but might need a little $ for shipping.
Aloha,

Bobby

Both spoken for!
Sorry I'm a noob and don't know how to delete this per instructions 

[Wzrd0803]

I have 2 green board Happ trackballs to offer up if anybody could use them.
Not like new but they do work.
If you are anywhere in the US shoot me a message and I'll ship them to you for free.
Anywhere else I could send them but might need a little $ for shipping.
Aloha,

Bobby

Are they USB? If not, how do I add them to my existing cabinet?  Splice wires? I'm interested.

[jmike]

Free! Local pickup only. North Jersey.

4-player empty control panel ready for joysticks, buttons, trackball and spinner. Measures 49 and 1/4 long and 16 3/4 at its widest point. Made of white melamine and has chrome t-molding.

Also available is a batman fight stick (not finished) has a floating bat signal where the buttons and joystick can be mounted. Just trying to clear up some space.

PM me or post interest here.

Thanks

[Arroyo]

Posted on main page but just in case:




Free aircraft carrier control panel (Flynn's).  You can use it or use it as a template.  More details on main page:

http://forum.arcadecontrols.com/index.php/topic,163252.0.html

[KSKID]

FREE Acclaim Tsunami Re-Volt Empty Driving Racing Cabinet Revolt

Local Pickup in North East Kansas

Have a Acclaim Revolt Empty Cabinet, picture shows what it looks like not a picture of actual cabinet though, basically just a good shell to do something with you have the need for a cabinet for a project or looking for a good cabinet to replace a damaged one. This style of cabinet is also used on the Need for Speed series of Games by Global VR depending on exact model you have. Cabinet is in good shape, still has the Revolt side art, includes the back door, Seat Assembly, Fold Down Marquee, Steering Wheel Assembly with Force Feedback Motor and Pedal Assembly.

The computer also goes with it, includes the motherboard, hard drive and computer case that its installed in with the CD drive, I actually have two of these will toss in on the deal, the 2nd one however does not have a hard drive. There are no security dongles, so not sure if they originally had any or not. The wiring harness is also still inside the cabinet.

Does not include:
==============
-Monitor
-Force Feedback Boards
-Audio Amps Boards
-Any other misc. boards specific to this game

[yellowsnow4free]

FREE Neo Geo MVS control panel

Local pickup in Northern California (San Francisco Bay Area, East Bay)

I picked up a Neo Geo MVS control panel locally about 2 years ago now.  I'll give more details in a second, but here's a picture:



Unfortunately, a previous owner drilled out two of the carriage bolt holes to install those buttons.  I'm sure it could be fixed if you have access to a welder.
Additionally, the wires they connected to the microswitches were soldered on, so there's some excess solder on the contacts.

I haven't tested the switches, but it's all there in terms of buttons and microswitches.  Albeit, some of them are mismatched and whatnot.
There's no memory card or headphone jacks, but the blockout place is in place.
3 of the 4 corners of the control panel overlay are broken off, and of course there are those 4 holes drilled in it where the buttons were installed.

Posting it here before trying to give it away on craigslist.

[nitrogen_widget]

NOT ME.
Saw this on FB Market place this morning.

4 free CRT monitors of questionable condition in Columbia TN.
might be something someone is interested in.
to far for me to go.

https://www.facebook.com/marketplace/item/333171255071869/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking=%7B%22qid%22%3A%22-7166565177795148171%22%2C%22mf_story_key%22%3A%22991450946525781863%22%2C%22commerce_rank_obj%22%3A%22%7B%5C%22target_id%5C%22%3A991450946525781863%2C%5C%22target_type%5C%22%3A6%2C%5C%22primary_position%5C%22%3A0%2C%5C%22ranking_signature%5C%22%3A8154997242642563072%2C%5C%22commerce_channel%5C%22%3A501%2C%5C%22value%5C%22%3A0.00046817566602929%2C%5C%22upsell_type%5C%22%3A3522%2C%5C%22grouping_info%5C%22%3Anull%7D%22%2C%22lightning_feed_qid%22%3A%22-7166565177795148171%22%2C%22lightning_feed_ranking_signature%22%3A%224426965814398156800%22%7D

[stevetnj]

Hello --

  I'm not sure if you are the admin (there doesn't seem to be an obvious way to message the admin) but I'm hoping you are...

  I'm trying to upload a picture of the part I'm selling, installed in the game.  I keep getting a "failed security checks" message.  What is causing that?  It's just a simple photo.

LMK, please.
Steve

[PL1]

I'm trying to upload a picture of the part I'm selling, installed in the game.  I keep getting a "failed security checks" message.  What is causing that?  It's just a simple photo.

Unfortunately, the forum software sometimes throws false positives during the security checks.   

The two workarounds that people have used to change the hash value are:
  1. Crop or resize the image by about 3-5%.
  2. Draw a dot in a similar-colored section of the picture.

After making one of these changes try uploading it again.

Related thread: http://forum.arcadecontrols.com/index.php/topic,160116.0.html


Scott

[jimj]

I have an old Ultimarc ArcadeVGA R9200 AGP video card to give away if anyone wants it.  I assume shipping to the US will be $10, in which case I can cover the shipping.  If shipping is more than that and you love AGP video cards I'll let you pay shipping. 

this has been taken

[IG-88]

I would be interested in it if it is still available.

[digitalmonkeyman]

Joystick with two tops

Just cover $5 shipping to the US only

[DaFoo]

They are Gone...

Fress ActLabs GS guns system.   On their web site claims they only work with Win95/98.  I never tried to hook them up.  I have the drivers etc. from the actlabs website on the included USB stick.

Guns:
https://photos.app.goo.gl/K8Cbvdt9KQVeUkp49

Stand/etc.
https://photos.app.goo.gl/kd8xMmStdJ4eHwMH7

[Epyx]

TWO WELLS GARDNER D9800 MONITORS. I used one on my Aliens build the other was a spare never used. They have sat unused and travelled the country with me. I would like them to go free to someone in the Vancouver area but have some requirements:

- They go to someone passionate about building Arcade cabinets and not a reseller
- The person in question come and collect them. I cannot help haul them but can provide easy access

Monitors were purchased in 2009. THe one used for about 8 years and then stored. The other never used.

[FLX]

Sonoma, CA

Sony KV-27S46 + uninstalled RGB SCART Mod

I bought this for $120 and spent the money on an RGB SCART mod that I didn’t install yet, but ended up with a great deal on a BMV A-20F1U instead.

Free for whoever's first!