Main > Main Forum

Oscar Controls Restructuring?

Pages: << < (5/5)

KungFuJoe:


--- Quote from: Lilwolf on July 07, 2005, 09:13:29 am ---Its the gears in the arkanoid spinner make small motions for very large motions.  IE, you might only need 1/2 a turn to get a full motion left / right.. plus have very accurate inbetween.  If you did this with a non-geared spinner you would loose a lot of detail since the spokes in the encoder wheel can only detect so much.

next... The vortex spinners are weighted where an arkanoid isn't.  So quick motion left/right is VERY easy to do.  but if you let go of the spinner it will stop right there right then. 

IE, arkanoids are ment to be used with a single rotation or less.
and tempests are made to be spun and let go.

--- End quote ---

If using MAME, isn't there a sensitivity setting or something where you could make a tempest spinner work for arkanoid?

SirPoonga:

Does anyone have direct links to the reviews, artwork, and other stuff that is on oscarcontrols.  He should have just taken the links to the store down :(

rbarr110:

http://www.oscarcontrols.com/V2/index.htm

Can still look at the products, but no ordering...   :'(

millercentral:

Please come back Kelsey, we need you!

Pages: << < (5/5)

Go to full version