| Main > Main Forum |
| Oscar Controls Restructuring? |
| << < (5/5) |
| KungFuJoe:
--- Quote from: Lilwolf on July 07, 2005, 09:13:29 am ---Its the gears in the arkanoid spinner make small motions for very large motions. IE, you might only need 1/2 a turn to get a full motion left / right.. plus have very accurate inbetween. If you did this with a non-geared spinner you would loose a lot of detail since the spokes in the encoder wheel can only detect so much. next... The vortex spinners are weighted where an arkanoid isn't. So quick motion left/right is VERY easy to do. but if you let go of the spinner it will stop right there right then. IE, arkanoids are ment to be used with a single rotation or less. and tempests are made to be spun and let go. --- End quote --- If using MAME, isn't there a sensitivity setting or something where you could make a tempest spinner work for arkanoid? |
| SirPoonga:
Does anyone have direct links to the reviews, artwork, and other stuff that is on oscarcontrols. He should have just taken the links to the store down :( |
| rbarr110:
http://www.oscarcontrols.com/V2/index.htm Can still look at the products, but no ordering... :'( |
| millercentral:
Please come back Kelsey, we need you! |
| Navigation |
| Message Index |
| Previous page |