Main > Main Forum

Control Panel building

Pages: << < (2/2)

Navmaxlp:

I used elbow rackets for mine. I used four of them (two on each side). Myself and a second player can put our full weight on it and the cab will tip but the CP doesn't move a bit. I cut a square notch out of the cab for the CP to sit on so it's pretty sturdy.

JONTHEBOMB:

What exactly are elbow rackets, and where could I find some to buy?

Thanks for your help.

Navmaxlp:

Elbow brackets are metal brackets that look like an "L".  You can get them in a bunch of sizes at Home Depot or Lowes on the cheap. Installation is a snap as there are just a few screws and they shouldn't obstruct anything when installed. Ask any hardware salesperson for a hand and you'll see what I mean. Good luck.

Tiger-Heli:

Angle iron or something like 1x1 wood strips would work also.

Pages: << < (2/2)

Go to full version