| Main > Main Forum |
| Control Panel building |
| << < (2/2) |
| Navmaxlp:
I used elbow rackets for mine. I used four of them (two on each side). Myself and a second player can put our full weight on it and the cab will tip but the CP doesn't move a bit. I cut a square notch out of the cab for the CP to sit on so it's pretty sturdy. |
| JONTHEBOMB:
What exactly are elbow rackets, and where could I find some to buy? Thanks for your help. |
| Navmaxlp:
Elbow brackets are metal brackets that look like an "L". You can get them in a bunch of sizes at Home Depot or Lowes on the cheap. Installation is a snap as there are just a few screws and they shouldn't obstruct anything when installed. Ask any hardware salesperson for a hand and you'll see what I mean. Good luck. |
| Tiger-Heli:
Angle iron or something like 1x1 wood strips would work also. |
| Navigation |
| Message Index |
| Previous page |