| Main > Main Forum |
| GunCon2 on PC-monitor |
| << < (34/42) > >> |
| Cananas:
It doesn't work because both signal are independent one each other. Andy, i'm having no time to test your guncon2 chip. The first time i tried, it work better than the first chip. I'll build a new circuit to ensure that the components are OK. |
| tivogre:
I've now built the circuit around Andy's jpac small chip AND his newer guncon chip. I have 2 guns working perfectly (as good or better than the Act-Labs) using the jpac smallchip. This is only at 640x480 resolution, but that's not an issue for me. I have NOT had success with the guncon chip. Again, this is with an nvidia card and WG 9200 27" monitor. At this time, I think I'm in good shape, as I can play most of the shooters (that I'm interested in) with two players perfectly. |
| nullb0y:
DUMB QUESTION IS THERE A WAY TO GET A GUNCON 2 TO WORK ON MY PC'S SVIDEO OUT? sorry for caps |
| Silver:
Yes so long as your are connecting your monitor/tv by the same S-video. Its the easiest way. There is extensive info on connecting on the two Guncon driver sites. Check the thread. |
| AndyWarne:
I re-tested today. Installed the latest driver and used my "Z-Gun" chip which is the revised version of the J-PAC small chip which can handle (ie divide) positive sync. It works fine at 640 X 480 and 800 X 600. No problems at all. The cursor is rather jittery at 800 X 600 but that's probably to be expected given the technology of the gun. To move things forward, can anyone on this thread who has the later chip, and can't get it to work, drop me an email. What we might be able to do is to send me your complete circuit and gun and I'll check things over. I am wondering if the make of the gun has a bearing. Mine is the blue Namco NPC-106 andy@ultimarc.com |
| Navigation |
| Message Index |
| Next page |
| Previous page |