| Main > Main Forum |
| GunCon2 on PC-monitor |
| << < (26/42) > >> |
| tivogre:
I have 3 of the JPAC small chips on order; as soon as they arrive, I will be building this. I will post my results here and on my web site. |
| fl0yd:
Thanks for pointing out the upgrade chip, I'd missed that part of your post. I have one on the way too, and will post my results once I've built the circuit. |
| Mad Dog:
Hi everyone! I got a J-Pac chip and build the circuit using the old capacitor... I put down all my tsting results at Smogs's forum (http://www.freeforumzone.com/viewmessaggi.aspx?f=66424&idd=74) So far I am not too convinced... it does not seem like a driver issue though. What confuses me most is that e.g. in 800x600, the gun only responds in the upper right hand corner. I can easily tell, because when my gun reads something it switches on the laserpointer automatically... ... I will try some more resolutions, frequencies etc soon and keep you updated... But would be good to hear some more from the people who got their guns to work! What setup, resolutions did you guys use? I am curious! I am far away from playing point blank on my monitor... |
| tivogre:
I got my 3 JPAC small chips today. Now I just have to track down the 680 Ohm resistor and .1 uF capacitor. I ultimately intend to build this circuite and my 9v / 5v output circuit on one board. I'll let you guys know when I'm done, and how it works out! |
| AndyWarne:
Some updates on this: First, many resolutions on ordinary VGA cards produce negative sync. The standard J-PAC chip wont divide this properly so I have revised it and produced a special Guncon chip for experimentation. Anyone who has ordered the standard J-PAC chip for this purpose, please drop me an email. About marketing a product for this: I started to lay out a PCB but put this on hold. The reason is, if selling a product, customers would expect support for it. This means I would need to "own" the solution. The driver is not mine to "own" , but even if I were to come to some arrangement about that aspect, I would not feel confident to guarantee the board would work properly, owing to too much of the solution being outside my control. Thats why I want to support people who want to experiment with this, but don't intend to take it further at the moment. Andy |
| Navigation |
| Message Index |
| Next page |
| Previous page |