| Main > Main Forum |
| Source for CLEAR levers behind the reject button on coin door? |
| (1/2) > >> |
| tivogre:
Hello! I recently replaced the stock yellow reject buttons on my coin door with the appropriately colored buttons for the players 1-4. However, behind each reject button, there is a spring loaded, translucent RED plastic lever that the bulbs shine through. This blocks a bit of the light AND tints all of my buttons slightly red. Is there a source for CLEAR replacements for these parts? |
| CJK:
If you don't mind my asking, where did you get the replacement buttons? I would like to do the same thing for my coin door. Thanks! -- Chris |
| tivogre:
--- Quote from: CJK on June 04, 2005, 06:36:06 am ---If you don't mind my asking, where did you get the replacement buttons? I would like to do the same thing for my coin door. Thanks! -- Chris --- End quote --- No problem. The reject buttons are from HAPPs here: http://www.happcontrols.com/cc/420517xx.htm And the Inserts: http://www.happcontrols.com/cc/42008400.htm Here is the result: The only thing that will make it better is to get the clear levers, and then maybe some superbright LEDs... |
| CJK:
That looks MUCH better than all one color! (I can hear my wife groaning now, as I find yet ANOTHER thing to spend money on for this cabinet!) Thanks for the info! -- Chris |
| tivogre:
OK... If no one has a SOURCE for these, does anyone know what they're CALLED (proper name) so I can begin looking for them? |
| Navigation |
| Message Index |
| Next page |