Main > Main Forum
Acrylic Control Panels!
monkeybomb:
--- Quote from: timoe on June 01, 2005, 08:55:30 pm ---Anyway it had a lexan bottom so you could see all the controls and wiring.
--- End quote ---
I think treyonics centurion is the controller with the plexi bottom, but I cant' find a pic.
dema:
If I had any talent the next cabinet I'd do is the clear one. I figure the $1000 material cost would be worth it if I could keep the other costs down, especially when you consider buying a prebuilt cabinet will run from $3,000 - $5,500.
markrvp:
--- Quote from: dema on June 02, 2005, 12:19:55 pm ---If I had any talent the next cabinet I'd do is the clear one. I figure the $1000 material cost would be worth it if I could keep the other costs down, especially when you consider buying a prebuilt cabinet will run from $3,000 - $5,500.
--- End quote ---
Measure three times, pray twice, cut once, scream continuously.
Buddabing:
--- Quote from: dema on June 02, 2005, 12:19:55 pm ---If I had any talent the next cabinet I'd do is the clear one. I figure the $1000 material cost would be worth it if I could keep the other costs down, especially when you consider buying a prebuilt cabinet will run from $3,000 - $5,500.
--- End quote ---
I looked at the link provided by rdagger, and sheets of 1/4" lexan go for only about $1.25 per square foot! So you could get three sheets for 4x8, about 96 square feet, for only $120.
Thicker sheets were more expensive, I think 5/8" went for $5 something a sqare foot. I don't know how you would cut that bad boy, however. And you'd have to find a local supplier.
southpaw13:
--- Quote from: Buddabing on June 02, 2005, 12:59:37 pm ---
--- Quote from: dema on June 02, 2005, 12:19:55 pm ---If I had any talent the next cabinet I'd do is the clear one. I figure the $1000 material cost would be worth it if I could keep the other costs down, especially when you consider buying a prebuilt cabinet will run from $3,000 - $5,500.
--- End quote ---
I looked at the link provided by rdagger, and sheets of 1/4" lexan go for only about $1.25 per square foot! So you could get three sheets for 4x8, about 96 square feet, for only $120.
Thicker sheets were more expensive, I think 5/8" went for $5 something a sqare foot. I don't know how you would cut that bad boy, however. And you'd have to find a local supplier.
--- End quote ---
Looks like a $900 minimum!
Southpaw